MEP Project Manager
Corderoy International company Ltd
Total years of experience :18 years, 3 Months
Project Management & Quantity Surveying of 3rd Mataf expansion project of Holy Mosque Al Haram Makkah
Design / Review, Installation Testing & Commissioning of Entire MV and LV systems, including entire LC system (CCTV, Fire Alarm, Telecommunication system) External MV and LV network system, External street Lighting Systems
Design Review, Site Modification of Shop drawings, for entire Electrical networks (LV, MV and LC)
Design/review, Installation Testing & Commissioning MV Switchgear (Up to 33kV) for Substation & LV Switchgear / MCC panels for plant equipment, cable selection/sizing, Calculations of electrical studies including: electrical system load studies, demand load estimates, and sizing major equipment and circuits and selective protection coordination, with DC System (UPS) selection & sizing
Review and closely monitoring project schedule and costs.
Developing, approving and coordinating work schedules to ensure cost, quality and time objectives are met
Developing and recommending improvements in design standards
Construction of Electrical building systems for Residential Villas, Apartments, Clinics, Schools, Sporting Complexes, Malls, Military police station etc.
Design/review of Utilities like (vendor packages) for STP, RO Plant, Fuel Station
Design/Review of load flow studies, Short circuit calculations, grounding protection system, lightning protection system, relay coordination, arc flash studies, motor starting system dynamics, harmonics analysis, ground fault analysis
Design/ Review, Installation, Testing and Commissioning of Supply distribution panels, Building electrical rooms, MV & LV U/G cable routing and cable sizing
Design, Installation, Testing and Commissioning of MV Switchgear (Up to 33kV ABB/GE/Schneider) for Substation & LV Switchgear / MCC panels for buildings, cable selection/sizing, Calculations for demand load estimates, for sizing major equipment and circuits and selective protection coordination, with DC System (UPS) selection & sizing
Design / Review of electrical systems, SLD, Schematic and connection drawings, Cable tray system design and lighting system (External and internal), develop detailed voltage drop calculation
Design modification, execution and optimization of Vendor design packages.
Providing consultancy on Project Planning, Execution and Management in tune with the core business objectives (including risk management, effort / time / cost estimation, and contingency planning)
Prepare RFQ packages, Quantity Surveying, Prepare BOQ
Handle all engineering issues
Performing the entire gamut of operations like FEED, BED and DED package design and review, concept definition & engineering studies, design scopes, preparation of engineering documents, vendor packages as per approved standards / procedures
Design/review, Installation Testing & Commissioning MV Switchgear (Up to 33kV) for Substation & LV Switchgear / MCC panels for plant equipment, cable selection/sizing, Calculations of electrical studies including: electrical system load studies, short-circuit analysis, relay coordination, arc flash studies, motor starting system dynamics, harmonics analysis, ground fault analysis, demand load estimates, and sizing major equipment and circuits and selective protection coordination, with DC System (UPS) selection & sizing
Design/Review, Installation Testing & Commissioning of Entire MEP and Low current systems like HVAC system, Lighting Control system, Security system, Fire alarm, smoke detectors, and Access Control system for Buildings
Preparing engineering designs/ drawings and technical specifications for ensuring smooth execution of large projects within the time and cost parameters and ensure that only Issue for Construction(IFC) drawings are being used
Developing risk management plans
Developed work to create and maintain standard processes and tools relating to Risk Engineering
Implementing Plant Protection System, Infrastructural System, Firefighting System and Plant Security Systems
Installation Testing and Commissioning of all piping system (Diesel, HFO, Water & Fire Fighting)
Installation, testing and commissioning of entire electro mechanical, MEP systems, BMS Systems, SCADA, Control and Automation Systems for entire Plant
Managing cost reporting and managing revenues including Claims, Invoicing and Cash-flow
Providing consultancy on Quantity Surveying, Project Planning, Execution and Management in tune with the core business objectives (including risk management, effort / time / cost estimation, and contingency planning)
Implementing plant’s preventive and predictive maintenance program (CBM), including daily scheduling and planning of maintenance activities for entire electrical system
Ensuring adherence to the quality standards as well as managing implementation of various stages of workflow using quality tools
Identifying areas of obstruction/ breakdowns and identifying steps to rectify the equipment through application of troubleshooting tools
Preparing operational budgets and ensuring adherence to the same; developing new process concepts for production optimization, yield improvement and so on
Highlights:
Implementation of Project Management methodologies mostly for Planning, costing, Quality Management and Resource Management
Implemented solar power generation plant of capacity 1MW to be utilized for plant lighting, outdoor lighting and few small equipment’s
Pivotal in streamlining processes through measures such as power usage optimizing techniques and implementation of Six sigma lean methodologies and FMEA in Production management and Design Engineering
Design and review of Electrical, Instrumentation & Communication System drawings, Feasibility Studies, FEED, BED and DED
Design/ Review, Installation, Testing & Commissioning of all MEP systems and Low current systems like Lighting control system HVAC System, CCTV, Intercom, Fire Alarm System, toxic gas alarm and Fire protection system, PAS, Data Centre and its fire protection (FM 200 and IG55 system), security system, access control, Communication system, BMS, Radio Active room and Optical fiber cable laying and site based various ancillary buildings
Calculations of electrical studies including: electrical system load studies, short-circuit analysis, relay coordination, arc flash studies, motor starting system dynamics, harmonics analysis, ground fault analysis, demand load estimates, and sizing major equipment and circuits and selective protection coordination, with DC System (UPS) selection & sizing
Design / Review for electrical system and SLD for various crushers, Ball and Sag mills, ADR Plants, CIL Units, Kiln system, Gold recovery plant
Developed detailed voltage drop calculations, Design and Drawing of SLD, lighting calculation and layout drawings using AutoCAD software, Grounding Schematic and connection drawings, Panel scheduling Conduit and Cable schedule and Installation details.
Design/review of Desalination Plants (RO Plant of capacity 140m3/Day), Sewage Treatment Plants
Review / Design of Helipad as per Federal Aviation Administration and Civil Defense Guidelines of Saudi Arabia
Design/review of fire protection system as per NFPA and supervision, testing and commissioning of MEP activities and infrastructural works; manage final inspection and approve final handover documents
Performing the entire Quantity Surveying activities.
Ensured the implementation of Project Assurance Plan (PAP) and the Technical Assurance Plan (TAP) as per QMS procedures
Assessed Electrical Method of Statements, Test Plans, and FAT's and witnessing the Site Acceptance Tests (SAT)
Supervised civil and electrical works of diesel generated power / CCGT (Cummins/Alstom/GE) substation 13.8/22/33 kV, of Capacity up to 50MW
Ensure that all related coordination drawings are provided to Contractors
Regularly attend technical site meetings and Stakeholders meetings
Managed the designing of LV, MV cables and Overhead Line as per international standards and customer specifications
Ensured timely preparation of detailed engineering proposals for the company’s complete range of products and services, and experienced in preparing Bid Documents
Prepared Request for Proposal (RFP) documents with Technical design details
Supervised MV cables tests including high voltage test, partial discharge test, DC sheathing test and test for shorted cables
Assisted in internal / external Audits to ensure that the correct Quality and Safety standards have been implemented and followed
Assisted in the implementation of new ERP (EPICOR) for the Engineering Projects Department Module
Led the design, planning, supervision and maintenance of all electrical system, electrical equipment installation including power transmission and distribution lines for Rural Areas
Review of contractor’s design drawings, specifications and calculation submittals and coordination of work with other disciplines.
Design / Review, Installation Testing & Commissioning of 4 no. of substation of rating 66/33 kV with all auxiliary and traction substation for Bangalore Metro Rail Project Phase 1
Supply, Installation and commissioning of all Metro substation equipment’s with Integrated network management
Managed OHTL, Underground Cabling, Substation Upgradation projects
Supervised the installation, testing and commissioning of Transformers, RMU, LV and MV switchgears and Cabling works, performed field inspections and provided professional field technical support as necessary during construction phases
Review and provided guidance in problem areas, recommended solutions, alternatives and improvements
Conducting RFI and issuing NCR’s and raise the NCN’s and Review/suggest the corrective actions
To prepare and submit weekly and monthly reports and updated registers