Project Manager
Technological Industrial Group
Total years of experience :11 years, 7 Months
Project:
Smart Parking System
Main Duties:
- Preparation and Implementation of Method Statement at site.
- To ensure implementation of HSSE requirements, and monitoring of all site
activities to guarantee that all work is being executed in safe manner.
- Responsible for management of all subcontractor on site, to ensure that they
are working with accordance to project quality plan and HSSE plan.
- Ensuring that all construction operations are carried out in accordance with
the project requirements, construction procedures and drawings, as well as
in accordance with the approved ITP’s and Project Quality Plan.
- Responsible of all required logistic such as material equipment, plants prior
to start the activity.
- To ensure that the Surveyor and the site engineer have completed setting
out reference points, levels for construction elements limit, dimensions of
it, the way of casting concrete, placing of steel reinforcement processes in
accordance with the AFC drawings.
- To follow up all the revisions AFC drawings, and ensure that site team are
working accordance with the latest design drawings.
- To provide the corrective actions and preventive actions for NCR’s.
Technical engineer shall prevent the NCR during work by ensuring that site
team is following MOS and project specification
- To ensure that all parties who are required to make any kind of test or
inspections are informed about the program of the works, and inspection
and testing requirements.
- Ensuring all quality control and pre-construction formalities (approvals and
preparation) are done sufficiently in advance to start the construction
activity in accordance to the set schedule.
- Ensuring that all safety measures are implemented during the work process.
- Planning; time schedule per each activity and therefore; per each main job.
Also; prepare general time schedule as per agreed execution plan
- Following and coordinating all activities, inspections and communications
with the client with regard to the construction, technical, and handing over
issues
Work as a Project manager for Structural & mechanical works.
Project:
1- Finance Directorate Complex Project
2- PRT (Bus Rapid Transit System in Amman)
Work as a project manager for Steel Structure, mechanical fabrication .
Project:
1- Aqaba warehouse cladding project ( Arab Potash Company )
Main Duties:
A) Demolition and release damaged roof cladding panel 4100 m2
B) Demolition and release damaged roof glass fiber 1500 m2
C) Fabrication & erection of roof cladding panel 4100 m2
D) Fabrication & erection of roof glass fiber 1500 m2
E) Demolition and install new gutters (side & between 2 warehouse) 700 m.l
F) Remove old ventilation system and install new one 600 m.l
G) Expansion Joint Covers 200m.l
H) Fix & repair holes in old cladding.
2- Aqaba New Port Package 2 - Grain Terminal Expansion.
Employer: Aqaba Development Company (ADC) and his representatives
Contractor: HAIF- MID Joint Venture
Subcontractor: NAJJAR Industrial Trading Co.
Designer: RELIANCE HEAVVY INDUSTRIES (RHI).
Project: Aqaba New Port Package 2 - Grain Terminal Expansion
Main Duties:
a) Develop and submit fabrication drawings based on the Design Drawings issued by
Designer and improve the connection details.
b) Fabricate, supply, transport and install of New Structural Steel and Miscellaneous steel
elements (handrails, ladders, etc.) for the whole Project and necessary accessories
(bolts, washers, nuts, welding rods, consumables …etc.) required to install the structural
steel, fit for purpose.
c) Connecting new steel structure with the existing structures, inclusive of welding, site
drilling and removal of existing obstacles.
d) Dismantling of existing steel structure, as may be required, and instructed by Contractor.
e) Relocating and re-installing of the following existing steel structure:
- Existing platforms at belt conveyor obstructing the movement of the Ship Unloader.
- Existing last frame in conveyor gallery
f) Dismantling and reinstallation of existing miscellaneous steel items (handrails and
ladders) as may be required and instructed by Contractor.
g) Supply, Fabrication, Transport and install of flooring either Chequered plates, or
galvanized grating or decking sheets with shear studs.
h) Supply only of steel items embedded in concrete.
i) Fabricate, supply, transport and install of cladding steel corrugated sheets, inclusive of
required flashing, gutters, fasteners and seals and any works deemed to be necessary to
complete the works.
j) Supply and delivery only of required anchor bolts, in accordance to Employer’s
Requirements.
k) Surface preparation and sand blasting of steel elements, in accordance to Employer’s
Requirements
l) Painting of Steel Elements, in accordance to Employer’s Requirements.
m) Preparation of QA/QC plan, ITP for approval from the Employer through Contractor.
n) As Built Drawings upon completion the Works.
o) Comply with HSE Procedures.
Work as a project manager for Steel Structure, mechanical fabrication and
piping from 1/11/2016 until 20/5/2018.
Project:
1- Piping System, Supports and Chutes/ Hoppers works for Ground Calcium Carbonate Project (GCC) Al-Qatraneh, Jordan
2- JBC CP-2000 Expansion, Safi, Jordan
The purpose of this project is to debottleneck the existing TBBPA plant to
produce 70, 000 metric tons of TBBPA per year at an asset utilization of 78% from a
current capacity of 46, 000 metric tons at 70% asset utilization. This calculates to a
theoretical annual rate of 89, 745 metric tons of TBBPA at 100% utilization. The project
scope includes upsized process equipment, enhancements to utilities, redesigned process
equipment, and several equipment additions to the existing process plant, revised piping,
structure, electrical, and instrumentation of the existing process. Most existing
equipment will be located where it is today with modifications as needed to piping, steel,
instrumentation, and electrical due to the larger size and weight. This project will take
place in the Tetrabrome (TBBPA) unit of the JBC facility.
The TBBPA area has been sub-divided into the following 8 work areas:
•AREA 1: BPA Dissolving
• AREA 2: Reactor Area
• AREA 3: Mother Liquor
• AREA 4A: Dryer System
• AREA 4B: Fourth Centrifuge
• AREA 5: Finished Product Packaging
• AREA 6: Cooling Water
• AREA 9: Ethyl Bromide
PRE-OUTAGE:
1-Civil / Structural Contractors Scope of Work
2-Mechanical Scope of Work
3-Piping Scope of Work
4-Electrical Scope of Work
5-Instrumentation Scope of Work
6-Insulation and Painting Scope of Work
Work as a Planning & Control Engineer for the Metal Construction And
mechanical fabrication from 15/12/2013 until 31/10/2016 with good ability to
deal with charts, workers and the distribution of work tasks commensurate with
project schedules taking into account all public safety measures. And work
within the specifications and standards for the project.
Project:
- Aqaba New Port Grain Terminal, Jordan ( 3000 ton )
- Owner : Aqaba Development Corporation
- Plan and direct the activities of fabrication, fitting, welding, assembly,
production testing, painting and finishing, and shop floor logistics.
- Manage the resourcing and implementation of all production personnel and
equipment within the Company.
- Coordinate the procurement function and usage of all consumables required
for production processing.
- Control the flow of production from department to department to achieve high
plant throughput.
- Provide production and job status communication to all functions within the
Company.
- Deliver a manufactured product that is accurate, on time and within budget.
- Ensure that all Manufacturing Activities are planned in compliance with the
Codes and standards
- Appropriately staff and plan human resources for accomplishing the
Manufacturing function.
- Provide regular employee performance reviews, safety and technical training,
and job development for the Manufacturing Department staff.
- Production-planning supervision, scheduling for production, preparing
production schedules for manufacturing of industrial or commercial products.
- Making sure each operation meets shipping dates according to sales forecasts
or customer orders.
- Analyzing production specifications and plant capacity data and performs
mathematical calculations to determine manufacturing processes, tools, and
human resource requirements.
- Planning and scheduling workflow for each department and operation
according to previously established manufacturing sequences and lead times.
- Determining the status of assigned projects, expedites operations that delay
schedules and alters schedules to meet unforeseen conditions.
- Preparing production reports.
- Resolve problems utilizing acquired knowledge & analytical abilities.
Other projects
- Steel structure for roof of silo’s (Supply, Fabrication & Erection for steel structure which required for roof of silos )
- Hot Gas Duct for Qatrana Cement Company
- AL-Rajhi Cement Company / Replacement Of Raw Mill OutLet Duct
- ALQassem Project
- Jazan Project
- ALZamil Project
Work as a Site engineer for the Metal Construction with good ability to deal
with charts, workers and the distribution of work tasks commensurate with
project schedules taking into account all public safety measures. And work
within the specifications and standards for the project.
Main Duties:
- co-ordinate and schedule the activities of workers who shape, form and join
metal parts or products to specified dimensions and erect light and heavy metal
products and structures
- Establish methods to meet work schedules and co-ordinate work activities
with other departments
-Resolve work problems and recommend work measures to improve
productivity
Specific duties:
-Read engineering and architectural drawings, sketches and work specifications
to be performed, and lay out, measure and mark sheet metal according to
drawings or templates
-Inspect product quality and installation to ensure conformance to
specifications.
-Study engineering drawings and blueprints, determine the materials required,
and plan the sequence of tasks to cut metal most efficiently
- Have a good experience in some measurement devices for steel working. And have course from SISC for these devices :
- Humidity device (Dew Check 4).
- dust test kit / iso 8502-3 / imo msc.215 (82) / imo msc.244 (83)
- Surface profile gage
- Thickness coating gage
- Salt test / bresle kit chloride test
Project worked in Najjar:
- Al-Disi Project
- Rotana Hotel
- Islamic Jordan - Dubai Bank
- Pipe Rack
- Al-Abdali Mall
- 2007 - 2012 Al-balqa' Applied University Amman-Jordan B.S c Degree in civil Engineering ( Highway & Construction Engineering) with G.P.A:2.9/4 Good