Bayt.com

كلما زادت طلبات التقديم التي ترسلينها، زادت فرصك في الحصول على وظيفة!

إليك لمحة عن معدل نشاط الباحثات عن عمل خلال الشهر الماضي:

عدد الفرص التي تم تصفحها

عدد الطلبات التي تم تقديمها

استمري في التصفح والتقديم لزيادة فرصك في الحصول على وظيفة!

هل تبحثين عن جهات توظيف لها سجل مثبت في دعم وتمكين النساء؟

اضغطي هنا لاكتشاف الفرص المتاحة الآن!
نُقدّر رأيكِ

ندعوكِ للمشاركة في استطلاع مصمّم لمساعدة الباحثين على فهم أفضل الطرق لربط الباحثات عن عمل بالوظائف التي يبحثن عنها.

هل ترغبين في المشاركة؟

في حال تم اختياركِ، سنتواصل معكِ عبر البريد الإلكتروني لتزويدكِ بالتفاصيل والتعليمات الخاصة بالمشاركة.

ستحصلين على مبلغ 7 دولارات مقابل إجابتك على الاستطلاع.


تم إلغاء حظر المستخدم بنجاح
محمد علي matheen, Mechanical Engineering Specialist

محمد علي matheen

Mechanical Engineering Specialist·SAUDI ENERGY.

المملكة العربية السعودية

بكالوريوس, mechanical

الخبرة العملية

مجموع سنوات الخبرة: 19 سنوات, 7 أشهر

Mechanical Engineering Specialist

يونيو 2024 - حتى الآن

SAUDI ENERGY.

الرياض، المملكة العربية السعودية

يونيو 2024 - حتى الآن

-
❖ Responsible for the Evaluation of the Manufacturers prequalification through the OMPQ system.
❖ Preparation of the Mechanical Standards in comparison with the International Standards.
❖ Preparing the Mechanical ITPS for Mechanical Equipments including the Witnessing as per the
Company Policies and procedures.
❖ Carrying out the Plant / Site Survey including the preparation of Reports as required for the
prequalification process through the systems.
❖ Witnessing of Plant Survey, Type Tests including the FAT for all the Mechanical related
equipments inside the Kingdom & Coordinate with other disciplines to meet the mechanical
engineering design requirements.
❖ Performs field inspection and provide field support, as necessary during construction phases.
❖ Provide response and technical solutions to RFI raised by Manufacturers.
❖ Co ordination with all the departments for the smooth completion of the prequalification process
including the resolution of the comments.
❖ Review of Third-party inspectors CV through SEC approved Agency required for carrying out the
Type Tests required to complete the Prequalification process.
❖ Clarifications of Manufacturer comments through the OMPQ systems.
❖ Preparation of weekly & monthly reports as required by the Management.
❖ Recommendation and proposal for the Preparation of the new Mechanical Standards for the new
products in line with the International Standards.
مجال الشركة:
توليد الطاقة الكهربائية

SENIOR MECHANICAL ENGINEER

ديسمبر 2018 - حتى الآن

CC CONSULTING ENGINEERS

الرياض، المملكة العربية السعودية

ديسمبر 2018 - حتى الآن

CC CONSULTING ENGINEERS
مجال الشركة:
الهندسة الميكانيكية
الدور الوظيفي:
الهندسة

SENIOR MECHANICAL ENGINEER

ديسمبر 2018 - حتى الآن

Saudi Electricity Company

الرياض، المملكة العربية السعودية

وجدت هذه الوظيفة عبر بيت.كوم

ديسمبر 2018 - حتى الآن

AS PER THE ATTACHED CV
مجال الشركة:
الاستشارات الإدارية
الدور الوظيفي:
استشارات

senior mechanical enginer

يوليو 2015 - حتى الآن

saudi electricity company

الرياض، المملكة العربية السعودية

يوليو 2015 - حتى الآن

مجال الشركة:
خدمات الاستشارات التجارية
الدور الوظيفي:
استشارات

Senior Mechanical Engineer.

ديسمبر 2018 - يناير 2024

Consolidated Consultants

الرياض، المملكة العربية السعودية

ديسمبر 2018 - يناير 2024

❖ Work with clients to assess their needs and translate them into designs, equipment, or new
systems. From the initial concept stage through to completion, they manage project timelines and
oversee all developments.
❖ Design review for the Drawings submitted by the Design Consultants.
❖ Coordination with client, sub consultants, contractors and supplier & Review of A/E contractors
design submittals, specifications, technical reports, calculations and coordinate work of other
disciplines and departments.

❖ Perform space planning, Mechanical room sizing and have knowledge of Civil defense, design
complete system air side, waterside and DX-system for commercial projects.
❖ Coordinate with other disciplines to meet the mechanical engineering design requirements.
❖ Performs field inspection and provide field support, as necessary during construction phases.
❖ Provide response and technical solutions to RFI raised by Contractors.
❖ Weekly Meetings with Client Engineers /Contractors, Preparation of Daily activity reports, Weekly
Reports, working on the design changes as required by the Client.
❖ QA / QC For the installed Mechanical Items at Site.
❖ Review and evaluate technical submittals submitted by the contractor & subcontractor according
to required project standards.
مجال الشركة:
الاستشارات الهندسية العامة

Senior Mechanical Design Engineer

يناير 2015 - أكتوبر 2018

Saudi Electricity Company (Head Office) SATECH-

الرياض، المملكة العربية السعودية

يناير 2015 - أكتوبر 2018

❖ Design Review of the Mechanical Drawings, which includes HVAC, Firefighting & Plumbing.
❖ Capacity Calculations checks for the Mechanical Equipments like HVAC, Fire Fighting Pumps,
Potable and non-potable water pumps.
❖ Prepare the Project Technical Specifications according to the Project requirement.
❖ To prepare design packages for GIS, Transformers and EPS substation contractors for
Procurements and Designs.
❖ Preparation of RFPS (Request for Proposals)
❖ Preparation of estimated Bill of quantities for the specified project and verifications.
❖ Evaluation of technical offers submitted abide by the standards. Participate in Pre-bid Clarification
meetings and respond to the queries raised by the contractors.
❖ Post Bid Clarification meetings for contractor finalization and evaluation of Contractors documents.
❖ Review and comment on Material suppliers prequalification documents for the new material
approval submitted to SEC. Handled- Construction
مجال الشركة:
توليد الطاقة الكهربائية

Mechanical Design Engineer.

يناير 2011 - ديسمبر 2012

AKP Eng. Consultants (Abdul Aziz Kameel & Partners,

الرياض، المملكة العربية السعودية

يناير 2011 - ديسمبر 2012

Worked as a Mechanical Design Engineer for all EPC Projects, which included Offices,
Warehouse, Workshops, and Administration Buildings etc.…
مجال الشركة:
الهندسة الميكانيكية

Mechanical Engineer (MEP).

يناير 1999 - يناير 2005

SAUDI ARAMCO, JEDDAH REFINERY, KSA (AMSCO LTD)

جدة، المملكة العربية السعودية

يناير 1999 - يناير 2005

: The Project Consists of Twin Tower 35 Floors for Hotel & 40 Floors for Offices
with District Cooling Plants, Podium, Basements, Fire Fighting system, Roof Floors with Swimming pools,
Car Parking Ventilation system etc.
مجال الشركة:
الهندسة الميكانيكية

التعليم

MALNAD COLLEGE OF ENGINEERING

سبتمبر 1999

سبتمبر 1999

بكالوريوس، mechanical

الهند

عرض المرفق

Malnad College of Engineering

سبتمبر 1999

سبتمبر 1999

بكالوريوس، Mechanical

الهند

المعدل التراكمي (نسبة مئوية): 68%

المعدل التراكمي (نسبة مئوية): 68%

Skills

PMP
Expert
PMP
Expert
AUTO CADD R 14
Intermediate
AUTO CADD R 14
Intermediate
COMMISSIONING
Intermediate
COMMISSIONING
Intermediate
BUILDING AUTOMATION
Intermediate
BUILDING AUTOMATION
Intermediate
BUILDING SERVICES ENGINEERING
Intermediate
BUILDING SERVICES ENGINEERING
Intermediate
COMPLIANCE TESTING
Intermediate
COMPLIANCE TESTING
Intermediate
CONSTRUCTION
Intermediate
CONSTRUCTION
Intermediate
FIREFIGHTING
Intermediate
FIREFIGHTING
Intermediate
HVAC
Intermediate
HVAC
Intermediate
MECHANICAL ENGINEERING
Intermediate
MECHANICAL ENGINEERING
Intermediate
PLUMBING
Intermediate
PLUMBING
Intermediate
SOFTWARE DEVELOPMENT
Intermediate
SOFTWARE DEVELOPMENT
Intermediate
PMP
Expert
PMP
Expert

اللغات

العربية

متوسط

الانجليزية

مبتدئ

الهندية

مبتدئ

الكانادا

مبتدئ

التاغالوغية

مبتدئ

الأوردو

مبتدئ

العضويات

ALL MEMEMBERS INSTITUTION OF ENGINEERS

MEMEBER

March 2002

التدريب و الشهادات

الشهادات
PMP (PMI)
Council of Engineers (S.C.E), AMIE.
SAUDI COUNCIL OF ENGINEERS
Feb 2021
عرض الشهادات