Project
PARSONS INTERNATIONAL LIMITED
Total years of experience :13 years, 6 Months
PARSONS INTERNATIONAL LIMITED
Doha, Qatar
Nov 2016 - Present
Project: P012 - Doha Expressway Construction and Upgrading of Infrastructure of Al Muntazah Street Extension - Package 13 (South Area)
Client: Public Works Authority (ASHGHAL)
Project Description: Construction supervision, testing & commissioning of the Roadway ITS and Tunnel Control & Monitoring System (TCMS-SCADA)
Dynamic Message Signs (DMS)
Lane Control Signs (LCS)
Magnetometer Detection System (MDS)
License Plate Reader System (LPR)
Over Height Vehicle Detection System (OHVDS)
CCTV Systems (PTZ)
Automatic Incident Detection System (AID)
Weigh in Motion System (WIM)
Emergency Road Telephone (ERT)
Flashing Amber Warning Lights (FAWL)
Road Weather Information Systems (RWIS),
Programmable Logic Control system (SCADA & MEP PLC’s)
ITS & SCADA software’s
Project Role: Assistant Resident Engineer- ITS/ SCADA
Duties and Responsibilities:
• Performs a variety of field engineering assignments, analyses to ITS and SCADA submittals by Contractor’s.
• Responsible for the review of ITS/ SCADA technical submittals, ensure its incompliance with project’s design, specification (ITS, TCMS/SCADA) standards:
Material Submittals,
Shop Drawings,
Method Statements,
Inspection & Testing Plan,
Functional System Design (FDS),
SCADA Graphics,
FAT/SAT procedures, test reports
Testing & Commissioning
Software’s (ITS & SCADA)
• Perform Inspections on the main contractor’s works on the material delivery, Installation of ITS system devices/components, including the installation of ITS Ducts/Manholes and other associated works on the project.
• Prepare site surveillances on the contractor site installations works. Record, maintain the surveillances log for further closing.
• Performs value engineering technique on the review of projects ITS software for monitoring of Roadway, Tunnel ITS devices.
• Maintain project installation reports on ITS works & Prepares monthly progress reports on ITS works towards client submission.
• Prepare for the audits required in accordance with the contract requirements & ensures that, the project quality control procedures are implemented in supervision works and monitors it for improvement.
• Work on contractor submitted “Testing & Commissioning” submittal to ensure that, the installed devices are fully tested, commissioned in compliance with client, project requirements.
• Receives and issues contractor’s Request for Inspection & testing works (RFIT’s) to relevant Inspector’s.
• Performs other responsibilities associated with MEP works, limited to PLC technical submittals, Inspection to witness the instrumentation cable termination wiring between MEP PLC & other MEP devices, testing of standalone PLC’s.
• Assists in the management and directs the team of Inspector’s for the supervision of the construction of the designs ITS works.
• Attend progress meetings, other technical workshops to resolves the contractor’s queries and implements solution to problems encountered.
• Review, the Inspector works on daily basis & solve, guide the inspector on all the site related queries.
• Ensure that, the contractor performed works is complying with the Approved Design, Construction Drawings, project QCS 2010/ITS/SCADA specification requirements.
• Assists in the preparation of construction work SNAG checklist/reports of the incomplete works.
IDS GROUP ENGINEERING CONSULTANTS
Abu Dhabi, UAE
December 2013 - September 2016
Project: Procurement for Traffic Control System for Variable Message
Signs
Client: Department of Transport (DoT), Abu Dhabi, UAE
Project Description: 41 Variable Message Signs systems (VMS),
3 Road Weather Information Systems (RWIS),
56 Remote Traffic Microwave camera’s (RTMS),
41 Closed Circuit Television Video cameras (CCTV),
7 Portable Variable Message Signs (PVMS)
Project Role: Intelligent Transportation Systems (ITS) Engineer
Duties and Responsibilities:
• Performs the design of the communication concept includes civil works such as ITS Ducts/ chambers, laying of fiber communication network routing to link VMS, CCTV and RTMS/ RVD’s systems.
• Reviewed project’s ITS Material submittal’s for onwards client (DoT) submission & approval.
• Reviewed the project's Video surveillance field equipment cabinet and ITS Equipment layouts.
• Reviewed project’s shop drawings of RTMS/RVD camera concept, TMC Equipment’s Rack layout, Internal patching between active & passive components, Network Schematic Diagrams, ITS components installation, hardware connection (termination), fiber optic cable laying and Traffic Management Centre console layout.
• Reviewed & approved Contractor's submitted method statements, field Inspections and Request for Information (RFI"S) Queries.
• Worked on the Installation and communication concept of Road Weather Information system (RWIS) system & Integration plan with central ITS system software.
• Witnessed the test on the field equipment cabinet’s and its compatibility with installed field systems.
• Witnessed and tested SAT site acceptance test of portable variable message sign’s (PVMS) & Variable Message Signs, other ITS systems.
• Reviewed Abu Dhabi's VMS Response plan software document for onwards client (DoT) submission & approval.
• Responsible for the review of projects functional system design (FDS) document which includes operational philosophy of VMS & other associated systems.
• Reviewed Integration and Testing Plan of VMS subsystem with Main Central Systems.
• Witnessed the VMS software test scenarios on the verification of signaling plan with central system.
• Reviewed Contractor’s submitted fiber optic splicing test reports & RTMS video cameras functioning Traffic data sheets.
PARSONS INTERNATIONAL LIMITED
Abu Dhabi, UAE
May 2011 - December 2013
Project: Al -Salaam Street (Sheikh Zayed Tunnel)
Client: Abu Dhabi Municipality, UAE
Project Description: 86 Closed Circuit Television Video cameras (CCTV,
49 Video Vehicle Detection cameras (VVDS),
26 Variable Message Signs Systems(VMS),
179 Video Incident Detection cameras(VIDS),
9 Signalized Intersections,
Traffic Control Room Incident Strategy and Video Wall
Systems (2) 3X1 Tunnel Control Rooms & (1) 3x2
(ADTMC),
SCADA HMI Systems interface with other MEP Systems,
Tunnel Integration Systems on SCADA HMI Systems,
408 Lane and Speed Control Signs Systems(LSCS),
2 Over Height Vehicle Detection Systems(OHVD),
Tunnel Digital Video Recording & Management
Systems(DVRS, )
Access Control Systems(ACS),
ITMSR (Incident Traffic Management Strategic Reports,
EVENT MATRIX for Tunnel Traffic Control Systems
Project Role: SCADA/ITS Engineer
Duties and Responsibilities:
• Reviewed and approved contractor’s Material Submittals on SCADA & TCS systems. Responsible for review and comments on contractor’s method statements documents for onward submission to client.
• Supervised TCS systems installations, terminations & testing of traffic control signal equipment. Review Traffic Signal Timing Plans for signalized intersections.
• Reviewed drawings for ITS installation equipment, communication network and back bone systems for tunnel control rooms and traffic control center (AD-TMC), SCADA data network switches/servers on Internet Protocol (TCP/IP).
• Reviewed and approved tunnel’s shop drawings for SCADA/TCS systems, Traffic signal drawings such as signal timing plan, signal cable termination such as 7 & 14 core cable termination from Traffic controller to the installed components.
• Tested tunnel monitoring SCADA with ITS technologies installed in the tunnel such as OHVD, Lane & speed signs, Variable message signs, CCTV, Video incident and detection systems, Video wall Systems, Network Monitoring Systems, Tunnels MEP systems such as Ventilation systems, Fire Alarm system, electrical systems.
• Responsible for the testing of tunnel MEP/SCADA/TCS systems integration with SCADA HMI.
• Witnessed and tested Factory Acceptance Test and Site Acceptance Test for Solari’s Variable Message signs /Lane Speed Control Signs.
• Tested and commented on SCADA Human machine interface (HMI) graphics for tunnels installed systems.
• Witnessed factory acceptance test (FAT) of tunnel SCADA PLC and TCS systems.
• Prepared Work Progress Reports, Log Sheets and Client Submittal Documentation.
Position: Junior SCADA Engineer
Project: Industrial Boiler Sequence Control using SCADA PLC
Client: Cement Corporation of India
Project Role: Junior SCADA Engineer
Duties and Responsibilities:
• Administered Engineering, Implementation, and Technical Support for Operations and Maintenance Automation systems.
• Provided Technical support in installation of PLC, RTU’s (Remote I/O), I&C Instrumentation Cabling, network switches, termination patching with the Data Centers.
• Worked in the team of Master PLC programmers for the control and operations of Automation systems.
• Worked on SCADA packages like, AB RS View, Siemens with field installed instrumentations systems (Boiler sequence control project using PLC systems the control and monitoring of individual boilers with reporting to an interface with SCADA systems).
• Assisted in programming logic controls, design and performance testing
• Maintained complete data and conduct analysis using various transducers
• In-charged of fault reporting and quality checks.
• Coordinated with other disciplines such as Mechanical and Electrical teams on the interface with SCADA PLC’s.
Project: PLC Based Bottle Filling Systems using SCADA Systems
Client: Automation Group of Industries & Manufacturing
Project Role: Junior SCADA Engineer
Duties and Responsibilities:
• Assist in preparing methodology reports, drawings, SCADA interface I/O Checklist requirements as per Client operational design/specification requirements.
• Assisted team of engineers in preparing concept of operation for monitoring & controlling of the system.
• Assisted Engineers on Method Statements, Construction site verifications, Material inspections & Equipment installation.
• Works on design document/ drawings, to develop a complete operational system.
• Witnessed installation, testing & commissioning of the PLC systems and interface with Central SCADA systems.
• Carried hands on field experience using Allen-Bradley PLC and Worked on PLC RSLogix-500 as per project specifications.
• Worked on Hardware and software such as PLC’s, Remote I/O, sensors, actuators, engineering operator workstation, control net modules, Modbus.
• Performs test on Site Acceptance Test and Interface Test with SCADA Systems.
• Prepared Checklists, work log sheets and daily inspection reports as per the Contract Specifications.
Bachelor of Engineer (B.E) in Electronics and Instrumentation Engineering Osmania University, India May 2008