Technical Service Engineer (Instrumentation)
MSA Middle East
مجموع سنوات الخبرة :15 years, 10 أشهر
Responsible for performing Service, Commissioning, Technical Support, Training, and Engineering of MSA, General Monitors, Gassonic & Senscient Fixed Fire & Gas Detection Systems and Portable Gas Detectors for customers and channel partners in the region.
o Commissioning of MSA/GM Control Systems and Notifier Fire Alarm Panels.
o Product Selection, Design, Programming, System Configuration, I/O Scheduling, FAT, Commissioning and SAT of MSA & GM FGFD products and control systems.
o Generation of Sales Leads from the inputs from end-users.
o Coordination with Inside Sales and Sales Team for effective fulfilment of potential opportunities identified during site visits.
o Preparation of techno-commercial proposals for modification and upgradation of existing FGFD Control Systems.
o Promotion of AMCs and service business over the region.
o Development of Authorized Service Centers over the region.
o Review Tender Documents, Technical Specifications and Drawings.
o Preparation of Engineering Documents like Instrument Datasheets, Cause & Effect Matrix, Power Calculation, BOM, MRB, ITP, SPIR, FAT and SAT documents of FGFD projects.
o Respond to clients’ technical queries and clarifications.
o Evaluate, respond and finalize the techno-commercial proposals and queries received from clients, 3rd party suppliers and subcontractors.
o Coordinating Project, Inside Sales and Service Team for effective and smooth implementation of projects.
o Supporting on future product development, features and functions to customers.
Ensure efficient and cost-effective delivery of Inspection, Testing and Maintenance of Fire & Gas and other monitoring systems in GASCO (ADNOC Gas Processing) Habshan-5 & Habshan Sulphur Granulation Plant (HSGP).
o Planning and Coordination and Supervision of the activities and resources for day-to-day activities of the F&G maintenance team (20 members).
o Preparation, Scheduling, Rooting and Completion of Work Orders, preparation of Purchase Order and Material Request.
o Participating in the preparation and review of various performance reports such as
Preliminary Failure and Root Cause Analysis etc. Monitor the effectiveness of PM programs and recommend changes as required.
o Ensure consistent implementation of work methods and procedures used in maintenance and engineering recommends improvements. Ensure systematic update in MAXIMO CMMS system.
o Monitoring the quality and performance of the gaseous extinguishing systems against the agreed Key Performance Indicators (KPI’s) and ensure continuous improvement of service.
o Participating in the preparation and review of Project Risk Assessment/Impact Assessments.
o Conversant with the Tyco, GASCO & ADNOC QHSE policies and emergency procedures.
o Executing project with due attention to Quality, Health, Safety and Environment and Liaise with the Company Quality and HSE Manager on all aspects of Quality and Safety.
o Have solid experience in a wide verity of F&G Instruments like Smoke (Optical, Ionization & Beam), Heat (RR, Fixed & Linear), Flame (UV, IR/UV & IR3), Hydrocarbon (Catalytic & IR), H2S (EChem & MOS), Open Path (Combustible & H2S), O2, SO2 & H2 Detectors, VESDA, Fire Alarm Control Panels - FACP (Addressable & Conventional), Inergen, CO2, FM200 & Halon Fire Suppression System, Deluge and Sprinkler System of prominent manufacturers like General Monitors, MSA, Honeywell, Det-Tronics, Gassonic, Senscient, Sieger, Kiddie, Detcon, Simtronics, Fire Sentry, Protectowire, Tyco, Notifier, Simplex, Silvani, Fike, Ansul, Xtralis, Vibro-Meter, Apollo, Thorn, Cooper-MEDC & Fenwel.
• Worked as Commissioning Engineer in Petrofac & GS JV’s NGL-4 Project of GASCO, Ruwais.
• Pre-Commissioning, Loop Checking, SAT (Yokogawa Prosafe RS & Centum VP) and Commissioning of Field Instruments, F&G system and Analyzers.
• Site Supervising, Manpower handling, Material handling, preparing as built drawings, ITR raising and preparation of invoice & documents at site.
• Preparation, raising and follow up of RFI, check sheets and punch list clearance.
• Tie in & Migration of existing systems with new systems.
• Execution of project with due attention for Quality, Health, Safety and Environment
• GASCO & Petrofac PTW Originator (Construction & Commissioning).
• Worked with ONGC in Offshore Oil & Gas Platform (BPA Process Complex, B&S Asset) as Instrumentation Maintenance Engineer.
• Maintenance of Process Instruments and Control Systems according to PMS (Preventive Maintenance Schedule) periodically in Process Plant, Process Gas Compressor, Turbine Generators, Water Injection Plant, Gas Lift System, Production Plant (Unman Well Head), Christmas Tree, SSV, SSSV, HIPPS, Glycol Dehydration Unit, Metering System, F&G Detection System, Deluge System and CO2 / Halone/Inergen Fire Suppression System.
• Maintenance of ESD, FSD & PSD Panels.
• Hand held experience with Emerson 375 &475 field communicators
• Maintenance and troubleshooting of Pneumatic & Hydraulic operated shutdown panels
• Installation, Commissioning, Maintenance and Calibration of Sensors, Transducers and Gauges for Pressure, Temperature, Level, Flow, Density and Mass Measurements.
• Maintenance and Commissioning of Field Instruments in Oil & Gas Refineries and Shipyards.
• Installation, Commissioning, Maintenance and Calibration of Sensors, Transducers and Gauges for Pressure, Temperature, Level, Density and Mass Measurements.
• Installation and Commissioning of Fire & Gas Detection and Fire Protection System.
• Application and project development experience with PLCs and SCADA.
• Experienced in flow characteristics, performance evaluation, selection & sizing of control valves.
• Installation, Calibration, Testing, Loop Checking, Commissioning and trouble shooting of field Instruments.
• Review and analyzing of instrumentation drawings such as location layouts, P&I diagrams, hook ups and schedules for overall project analysis and modification recommendations.
• Quantity surveying, Measurement and Billing related works.
• Responsible for reviewing specifications, drawings, and other documents from consultants and client.
• Site Supervising, Manpower handling, Material handling, preparing as built drawings, ITR raising and preparation of invoice & documents at site.
• Responsible for overall field supervision over the execution of construction activities and to ensure the work complies with the client’s HSE and quality requirements.
• Executing project with due attention for Quality, Health, Safety and Environment and Liaise with the Company Quality and HSE Manager on all aspects of Quality and Safety.
NSS College of Engineering, Palakkad was established in 1960 with three branches during the second Five – Year plan with the assistance of Central and State Government under the Grand in – Aid scheme. Currently it is one of the most reputed, premier Engineering educational institutions in Kerala, managed by Nair Service Society affiliated to the University of Calicut. At present, the institution offers B-TECH degree courses in six branches and M-TECH degree courses in Communication engineering,Power Electronics,Computer Science & Engineering, Structural Engineering and Computer Integrated Manufacturing The Department of Instrumentation & Control Engineering the only one of its kind in the University of Calicut was established in 1980. The Department offers a full time B Tech Degree course in Instrumentation & Control Engineering. The total annual student intake is 72. Department has been backed up by efficient, dedicated and specialized faculty and they work with dedication to keep in pace with the ever changing control and Instrumentation scenario. Head Of Department : Dr.S.Sreenadhan Off: 0491 2554955 e-mail : .in http://www.nssce.ac.in