الحد الأقصى لحجم ملف التحميل: 3MB أنواع الملفات المسموح بها: jpg, jpeg, gif فقط

اضغط على زر البحث، قم باختيار صورة معينة، ثم اضغط على حفظ الصورة
المبادئ التوجيهية
  1. قم بتحميل صورة لنفسك فقط.
  2. سيتم رفض صور الأطفال أو المشاهير أو الحيوانات أو صور الشخصيات الكرتونية.
  3. سيتم رفض الصور التي تحتوي على عري أو الصور العنيفة وقد تؤدي تلك الصور إلى إلغاء حسابك الخاص.
  4. سيتم رفض صورة جواز السفر أو صورة عن بطاقة الهوية أو تلك التي تحتوي على أي معلومات شخصية مثل عنوانك ورقم جواز السفر، أو أرقام الاتصال الخاصة بك وذلك من أجل أمنك الشخصي.

حذف المبادئ التوجيهية

MOHAREB ALRSHIDY

Project Engineer

VELOSI

البلد:
المملكة العربية السعودية - الشرقية
التعليم:
بكالوريوس, Civil Engineer
الخبرة:
15 سنة, 7 أشهر

الخبرة العملية

ما هي خبرتك المهنية؟ في الواقع، إن الخبرة المهنية هي من أهم أقسام سيرتك الذاتية.
يمكنك ذكر كافة مهاراتك والمسؤوليات، والمشاريع والإنجازات التي قمت بها في كل دور وظيفي. إن كنت قد تخرجت مؤخراً، يمكنك إضافة الأعمال التطوعية أو فترات التدريب التي قمت بها.
إضافة الخبرة

مجموع سنوات الخبرة:  15 سنوات, 7 أشهر   

ديسمبر 2010 إلى حتى الآن

Project Engineer

في VELOSI
البلد : المملكة العربية السعودية - الشرقية
Perform monitoring and Inspections of Alignments, Plumbed and properly installation of Foundations, Beams, Columns and slab in conformance to IFC Drawings and Project specifications.
 Perform monitoring and inspection of Placing of Concretes for all Structural and non-structural concretes.
 Perform Inspection, monitoring of Interior and Exterior Partitions for Masonry or Gypsum wall Board.
 Coordinates with other discipline such as Electrical, Mechanical, HVAC, Plumbing and Communications for such Embedment to insure all has been properly installed and inspected prior to concreting or closure of such item of works and as per IFC Drawings and ARAMCO Standards.
Duties & Responsibilities:
 Provide technical support for the quality assurance & field inspection activities on all projects sponsored by the Saudi Aramco Project Management Team (SAPMT).
 Perform a variety of inspection activities; conduct and participate in on-site inspection witnessing and recording test results and preparing various recording tasks relating to inspection points.
 Perform inspection in elevated structures and confined spaces through the quality system inspection procedures and Saudi Aramco Typical Inspection Plan.
 Performs daily field “Hold”, “Witness”, and “Surveillance” inspections and tests at manufacturing facilities or construction sites to ensure compliance with the Saudi Aramco Standard requirements and project specifications.
 Provide receiving inspections on materials and equipment as applicable to assigned tasks and projects to ensure compliance with the Saudi Aramco standard requirements and for proper handling, storage and protection.
 Monitors Contractors’ Quality Systems and Quality Personnel for compliance with Project Quality requirements, and records.
أغسطس 2010 إلى ديسمبر 2010

QA/QC Engineer

في mmg (mohammad al mojil group)
البلد : المملكة العربية السعودية - الدمام
Assigned on quality control and quality assurance for the following project:
A. Manifa Core Hydrocarbon Facilities Project (Gas Oil separation Plant )
Duties & Responsibilities:
 Provide technical support for the quality control, quality assurance & Field inspection activities.
 Perform monitoring and Inspection of Earthworks such as Backfilling, Excavation and prepared Request for Inspection (RFI) for final approval and insure compliance of works as per engineering specifications and ARAMCO Standards.
 Perform monitoring and Inspections of Alignments, Plumbed and properly installation of Foundations, Beams, Columns and slab in conformance to IFC Drawings and Project specifications.
 Perform monitoring and Inspection concrete pipe racks, equipment’s foundations, collecting pits, ponds, manholes, catch basins, ditches, asphalt.
 Responsible for inspecting specific construction points (items) to verify readiness for progress of construction per Saudi ARAMCO Engineering Standards & Procedures and other applicable engineering codes & standards.
يوليو 2008 إلى يوليو 2010

Civil Engineer

في ZUHAIR FAYEZ PARTNERSHIP (KSA)
البلد : المملكة العربية السعودية - الدمام
STAAD modeling, load calculations, computer analysis output interpretation, layout and sections determination, and AutoCAD drafting.
 Involved in Quantity Surveying and preparation of material take off’s for the above listed projects. This included quantifying all structural items (Formwork, Steel bar, Concrete volume, Earthwork...etc.).
 Worked on civil utilities design of Dhahran Camp Water Supply Capacity Upgrade.
 The job included sizing required water tanks based on population,
 Consumption rates, assessment the increase in the rates of future consumption, conduct design.
 Designing water underground network elements.
 Involved in Construction support KAUST Project. This included preparing structural drawings (Drawings Details, QA/QC, Review drawings, As Built ...etc.).

التعليم

ما هي خلفيتك التعليمية؟
اسمح لأصحاب العمل بالإطلاع على المزيد حول خلفيتك التعليمية. كن واضحاً ومختصراً.
يونيو 2008

بكالوريوس, Civil Engineer

في king faisal university
البلد : المملكة العربية السعودية - الشرقية
المعدل: 3 من 5
Bachelor Degree of Science in Civil Engineering

Specialties & Skills

 Civil engineer with solid organizational and technical skills

Civil Engineering

Project Engineering

Excellent knowledge in projects planning and scheduling.

Good background in projects cycles and activities involved in each phase of the project.

Safety oriented

Solid technical knowledge in structural concrete design.

Skill in both verbal and written communication

Experience in ACI, IBC, ASTM, ARAMCO Standards & Procedures & construction project inspection.

Skill in reading and interpreting plans and specifications to compare them with construction in prog

Knowledge of construction safety requirements and practices

structural engineer

اللغات

كم من لغّة في رصيدك؟
إن تكلم لغات متعددة من الأمور الأساسية في بعض الوظائف لذا عليك إضافة المهارات اللغوية من أجل تحقيق نتائج أفضل.

الانجليزية

متمرّس

التدريب والشهادات

Concrete Failure & Repair ( الشهادة )

صدرت في: May 2010 صالحة لغاية: - May 2010

Basic Strength of Materials ( الشهادة )

صدرت في: March 2010 صالحة لغاية: - March 2010

ISO 9001-2008 Awareness (QMIS) ( الشهادة )

صدرت في: January 2011 صالحة لغاية: - January 2011

Engineering Aspects of Welding ( الشهادة )

صدرت في: December 2009 صالحة لغاية: - December 2009

Introduction To Cost Engineering ( الشهادة )

صدرت في: December 2008 صالحة لغاية: - December 2008

Soil Mechanics Excavation & Compaction ( الشهادة )

صدرت في: April 2009 صالحة لغاية: - April 2009

تحميل
تحميل...
تحميل...