Muhammad Naveed

• Degassing Station (DGS)
• 4 Trains of Crude Oil Stabilization, 1st Stage & 2nd Stage Separation, Crude Dehydrator,
Crude Desalter, Crude Storage and Crude Oil Export Pumping Station.
• Capacity: 200000BBLPD.
• 4 Trains of Produced Water Treatment, Treated Water Storage and High-Pressure Water
Injection System (High Pressure Multistage Pumps), Injection Wells.
• Capacity: 250000BBLPD.
• Utilities: Hot Oil System, Nitrogen Package, Instrument Air Compressors System, Fuel Gas
System, Flare Knock Out Drum System, Chemical Injection Skids, Flare System, Atmospheric
ATM Flare, Low Pressure LP Flare and High-Pressure HP Flare System.
• Oversee daily operations of production facilities, wells, and process equipment to ensure
safe and efficient performance.
• Monitor process parameters, adjust controls, and optimize production rates in line with
operating targets.
• Ensure all activities comply with HSE (Health, Safety, and Environment) standards, company
policies.
• Lead and participate in safety meetings, toolbox talks, and incident investigations.
• Identify and troubleshoot process upsets, equipment malfunctions, or abnormal conditions
promptly.
• Record and report operational data, including pressures, temperatures, flow rates, and
production volumes.
• Lead and execute plant or well shutdowns, startups, and changeovers in accordance with
approved procedures.
• Suggest and implement process improvements to enhance reliability, safety, and efficiency.
• Participate in training and competency programs to maintain high operational standards.

• Membrane Technology then Amine Solution (MDEA) due to its high CO2 concentration (45%)
in raw gas composition. Currently, Mari Petroleum is processing 250 MMscfd natural gas.
• Inlet Receiving Area: Consist of Front-End compressor & three phase separator
• Membrane Unit: Cameron Acid Gas Membranes (Schlumberger) Single Stage Membrane Skid
with Pre-treatment & Pre-Heater, Membrane for CO2 removal from 45% to less than 15%,
04 trains of membrane each train 50 MMSCFD total membrane gas flow designed 200
MMSCFD. Amine Sweetening Unit: 15%Mole of CO2 removed from natural gas by chemical
absorption process with solution (MDEA+ Demin water) this process consists of Absorber,
regenerator Hot Oil, re-boiler, flash drum, heat exchangers, coolers, carbon/charcoal
filters and high-pressure pumps.
• Gas Dehydration: Consist of Absorber, re-boiler, TEG Pumps, flash Drum and BTEX operation
to regenerate the tri ethylene glycol, burn flash gases and recover TEG.
• Utility Operation:
Atos Copco Instrument air compressor & Nitrogen package, Firewater Pumps, Pressurized
fire ring, Foam flushing and Deluge system. Condensate stabilization unit, storage and
loading operation, R.O Unit, Fuel Gas supply network for power.

I have worked as a Senior Control Room Operator with Pakistan Petroleum at Gambat Gas
Processing Facility GPF-IV. I was involved in pre-commissioning, commissioning and master start-up
of plant.
Main Responsibilities:
• Achieving safe and smooth operation of GPF for meeting approved targets of production
while controlling unplanned shutdowns and controlling off specs
• Ensuring the working condition of all safety equipment and maintaining the safety culture in
Plant Operations including compliance of PTW system, MOC system, and compliance of
Process Safety Management protocols.
• Developing start-up & shutdown procedures and marking P&IDs for isolation and ensuring
the safe startup & shut down of the plant in accordance with procedures.
• Carry out regular and detailed parameters checks while handing over and taking over the
plant and all rotating equipment used in operation such as compressors, engines, pumps, as
well as static equipment such as separators, contactor towers, vessels, heat exchangers &
storage tanks to ensure all parameters are within operating envelope and proper functioning
of each equipment independently.

• I have worked at Attock Refinery Limited as DCS Operator and on CDU/VDU and LPG Unit
• Safe shut down and startup of unit as DCS Console Operator.
• Maintain the quality of products as per ISO standards
• Safe Handling of troubleshooting (i-e Refinery Gas gathering system, Overhead Fan
Condenser failure) and emergency handling (i.e., Power Failure, Instrument Air Failure, Loss
of Cooling Water Failure) at plants.
• Optimize operation of stabilizer to control RVP of reformate.
• Communicate with other departments like Oil movement, Utilities and Store whenever there
is an issue regarding product specification, utilities consumption or chemical inventory.
• Monitoring the performance of Furnaces to ensure optimized fuel consumption.
• Light Naphtha/LWK Treating Unit:
• Optimizing and controlling the processes of Naphtha Sweetening process for the removal of
Mercaptans (RSH) and H2S through the following Merox Sweetening Process steps:
• Pre- washing through caustic solution
• Reaction chamber
• Settling process for the regeneration of Caustic solution for recirculation