SENIOR PROJECT ENGINEER
CONTROL CONTRACTING AND TRADING CO.
Total des années d'expérience :22 years, 11 Mois
• Managing full life-cycle of the project and ensure that project is successfully completed from beginning to end including kickoff, detailed Engineering, Procurement, Construction, Installation, Pre-Commissioning & Demolition
• Monitor progress and performance of the Subcontractors and Vendors to ensure its in line with the approved schedule, specification, and standards.
• Build and manage relationships with clients, contractors, vendors, and other project-related staff.
• Responsible for Weekly/Monthly meetings with stakeholder, Presentations, issuing MOM & Progress reports
• Responsible for execution of work to ensure compliance with approved procedures, AFC drawings and processes.
• Coordinating the Risk Management Workshop by preparing the Risk Management Plan, populating the Project Risk Register, Conduction the Risk Management Work Shop and follow up sessions for monitoring Risks.
• Manage the Interface Register, Workshops touching the EPIC Project scope regarding schedule and cost.
• Work with Procurement, Engineering and Expediting Team to source and delivery the material.
• Visit project sites periodically to discuss and monitor operational and safety issues with supervisors and clients.
• Participate to various Technical Workshops HAZID, HAZOP, PHSER, Model Reviews, Risk Management workshops, Constructability Review, HAZOP & SIL studies; assist in formalizing the action register & ensure timely close-out.
PROJECT HANDLING: Combined USSC Site Schemes Project for ADNOC Off-shore (Brown Field)
Project is covering the Load migration from PDP to PGP platform, PMS & ECMS upgradtion by OEM and Replacements of 1000 kVA Emergency Diesel Generators, Replacements of 17 nos. Transformers upto 10MVA, NETs, HV, MV & LV Switchgears modification, Structural Extension, Hot Changeover.
Working here as Senior Project Engineer and responsible for:
• Supervising the Project erection activities as Project Engineer for PMT, Construction, Engg, Material & Manpower
• Executing the project by implementing HSE, quality and process safety throughout project
• Project Coordination with Engineering Team, Procurement & Expedition, Consultant, Contractors, HSE & Quality
• Establishing good and effective communication with all stakeholders within the group and with client PMT, PMC, HSE, Site operations team and with sub-contractors & vendors throughout the project.
• Review of Engineering design & Vendor documents (Procedures, ITP, P&IDs, Isometrics, Layouts, IOMs, SLDs, GA, hook-up drawings, Interconnection, design calculation, concession requests)
• Responsible for Task Risk Assessments (TRA) identifying Risks to ALARP level for Tie-ins and SIMOP operations
• Preparation of Task execution presentation with 3D, Work packages and Method Statements for Critical Activities
• Participating in Model Reviews, Risk Management workshops, Constructability Review, HAZOP & SIL studies.
• Responsible for meeting with stakeholders and issuing Minutes of Meetings and Progress reports
• Issue the best practices and lessons learnt throughout the lifecycle of the project
• Manage the repairs, maintenance and troubleshooting activities during the project execution stage.
• Responsible for execution of work to ensure compliance with approved procedures, AFC drawings and processes.
• Responsible for approving and issuing the permits for Installation activities
• Identify quality issues and work with the construction and contractors to timely resolve them
• Responsible for the Contract management, contract correspondence with the Client and Vendor
• Involved in Contract Estimating by providing inputs to Estimation, Cost Control and Changeorder Administration
• Preparing PR & SR for the local purchase/services, technical bid evaluation and meetings with vendor/contractors
PROJECT HANDLED:
• P-2272 ZKOL Project for Electrification WHTs and addition of new Risers platforms at ZCSC & ZWSC: Executed the construction, installation, commissioning activities of 2 new Risers Platform, upgradation of 57 WHTs, laying of 200 KM 11kV composite subsea Cable. At WHT installation extension of structure, Piping modification, new 11KV RMU switchgear (M/s. B&F, UK), UPS system (M/s. Site technology, UAE), F&G, Telecom Panels, RTU (Schneider), SCADA (Emerson), HSSS (Bousteed Control Singapore) at 34 WHT locations, Splitter Boxes and established Electrification networks with 9 ring loop - ADNOC Offshore.
• P-0272 100 MBD Brown Field Modification Project: Executed the construction, installation, commissioning activities of existing CSP, EP, RP Platforms, New B-14 Bridge, HIPPS (M/s Tyco), 2X MOL Pumps (GE) 1555m3/hr flowrate (11kV, 3.3MW) with lube oil & MMS, Upgaradation to New B-14 Control Room with new DCS, ESD (ABB), F&G, LV & HV Panels (M/s. SE) for 100MBD ADNOC Project.
• P-9226 CRPO 51 - ZULF EDP Electrical Distribution Platform (EDP): Executed the construction, installation, commissioning activities of ZEDP-1 platform, 230KV GIS Substation (M/s. GE France), 230kV Transformers 80MVA & Shunt reactors 120MVAR (M/s. Hyundai Korea), 13.8KV switchgear (M/s. AP, KSA), Power system Automation (M/s. SEL, KSA), 480V distribution (M/s. L&T) and HVAC (M/s. CCTC) for Saudi Aramco.
• P-7243 CRPO TP-21 Tie-in Platform Project: Executed the construction, installation, commissioning activities of TP-21 platform, 115KV GIS Substation (M/s. GE, Switzerland), Electrical, Instrumentation and Telecom Panels, HVAC System, MOV & Shutdown Valves, HSED for Saudi Aramco.
• Qusahwira Full Field Development Project - ADNOC.
• P-8067 Demothballing Project Zakum West Super Complex - ADNOC Off-shore
Detail Engineering & Construction Supervision of pipeline project for the supply of natural gas to Masdar PV from Taweelah Plant, including upgradations of SCADA, RTU, Control & ESD system, 480V Distribution Board, F&G, HIPPS, Gas metering, Pressure reduction skid, MOV, Horizontal directional drilling (HDD), Block valve stations, CCTV. Prepared detailed engineering documents, design basis, construction procedures, specifications, datasheets, layouts, material requisitions, MTO, Instrument Schedules, location layouts, termination & loop drawings.
Involved in Front-end engineering design and detail engineering to long-term operations and asset maintenance.
• Prepared detailed engineering documents, design basis, philosophies, specifications, datasheets, layouts, material requisitions, MTO, Instrument Schedules, termination & loop drawings.
• Performed Technical bid evaluation, review of vendor documents and drawings.
• Liaison with vendors, EPC Contractor and Client teams.
• Participated in SIL studies, Hazop studies & Kick-off and Progress Meetings.
• Site Construction, Pre-commissioning, Commissioning supports.
PROJECT HANDLED:
• EPC of Kandhkot Field Gas Compression Station (KFGCS) Project: consists of 3 x 50% Turbo Driven Gas Compressor Trains (Siemens) to deliver 210 MMSCFD gas at 700psi and associated utilities, Gas Dehydration, Produced water treatment, Oil-water separation and recovery, Close Drain & Flare system, Firewater, Instrument Air & Inert Gas plants.
• FEED for Kandhkot Gas Purification Plant (KGPP) Project: for the design of 2 x 50% Gas Sweetening Units (amine-based) to deliver 210 MMSCFD gas at 700 psi and associated utilities.
Detail Engineering, Coordination with Engineering, Vendors & Construction supervision of El-Wastani Phase-III, Gas Development Project (WASCO, Egypt) for the process of 160 MMSCFD natural gas & 240 ton LPG. The project comprised of Glycol Injection & Regeneration, Condensate Stabilization unit with overhead Gas compressors, Turbo Expander, De-ethanizer, De-butanizer, Mechanical refrigeration, Molecular Sieve based adsorption bed and Utility packages.
• Maintenance and Troubleshooting of Electrical, Control & Instrumentation.
• Involved in Commissioning of Continuous Casting Machine (CCM) & Gas Insulated Switch Gear (GIS) project at National steel and Iron factory (NSIF) with Riverside Automation UK.
• Designed, constructed & commissioned the up-gradation project of the Utilities Water Plant of Al-Ittefaq Steel Products Company Using the Allen Bradley Control Logix System.
• Designed, constructed & commissioned of Automatic Bus Transfer Scheme (ABTS) project for the Al-Thurayah Substation.
Managed the E&I Erection of PLC / DCS based control projects by design (Functional design specifications, IO List, Cable Schedule, hardware installations, Logic Diagrams, HMI development, Networking, troubleshooting, maintenance):
• Designed, Constructed and Commissioned the Caustic Soda expansion project (designed by Asahi-Kasei Japan) for SITARA Chemical using PlantScape DCS Honeywell.
• Designed, Constructed and commissioned the up-gradation project of Energy Load Management and Shutdown System (ELMS) for FFC fertilizer plant using Allen Bradley PLC-5, having Ammonia, Urea and Utilities units (Central Cooling).
• Designed, Constructed and commissioned of Dry Milk Production plant comprised of Dryer & Evaporator packages using Allen Bradley Control Logix PLC system for MILLAC Foods Lahore.
• Designed, Constructed and commissioned Burner Management System (BMS) project of Boilers and Heat Recovery Steam Generators (HRSG), Demineralization plant (Demin Train) Project for Ammonia-II for ENGRO Fertilizer.
BACHELOR OF ENGINEERING IN ELECTRICAL