Total Years of Experience: 16 Years, 7 Months
June 2014
To Present
Project Engineer - ELV Systems
at Powerins Automation
Location :
India - Kerala
Installation & Commissioning
Anchoring commissioning of networks; ensuring completion of project in minimum turnaround time effective resource utilisation to maximize the output.
Ensuring preventive maintenance of networks including schedules / shutdown maintenance to ensure trouble-free and seamless operations.
Preparing various project reports for identifying areas of obstruction / defects, conducting troubleshooting, service and repair to rectify the network.
Core Competencies
Project Engineering
Monitoring projects with respect to cost, resource deployment, time over-runs and quality compliance to ensure execution of projects within the time & cost parameters.
Preparing bill of material & detail engineering; conducting project review meetings for evaluating project progress & taking adequate corrective actions, if required.
Handling programming software for CCTV, Access Control System and Security Systems.
Notable Accomplishments:
Steered efforts for streamlining the Bosch IP CCTV System and PCSC Access Control Systems including both hardware and software.
Successfully managed various classifieds projects.
Individually installed programs or trouble-shooted the system which eliminated the condition of External vendors and saved a lot of money for the company.
Effectively carried out the maintenance effectively so that the client can run the system with old device’s itself.
Effectively addressed major technical issues related to Access Control System Database Issue, changed the database to SQl Server 2008 after which the system became stable.
Significantly executed all assigned projects before the client desired time which led to client satisfaction.
Projects Accomplished
Installation and configuration of:
- Optical Cable for CCTV and Access Control Systems.
- Optical Converters (Both Transmitter and Receiver: VT1100, VT2100, VR1100, VR2100) both Single Mode and Multimode Optical Cable.
- Bosch Indoor Dome Camera.
- Bosch PTZ Camera and Bosch PTZ MIC Camera.
- EX80/82DXL EXTREM CCTV Outdoor Camera.
- Cisco Switches, Card Reader, Long Range Card Reader, Push to Exit Button, Magnetic Lock, Strike Lock, Biometric Figure Print and Door Contact Programming with PCSC Software ”Lincnet”.
- Intrusion Alarm System
- EPABX
- Automatic Gate
- Automatic Water Level Controller
- Public Address System
- CCTV System using Bosch Software BVMS 2.0.
- CCTV Camera's with Intelligent Video Motion Detection (IVMD).
- Backup Server and Data Restoration.
- CCTV and Access Control Central Servers.
- Installation of UTP and Optical Networks for CCTV and Access Control Systems.
- UPS for CCTV and Access Control Systems.
Anchoring commissioning of networks; ensuring completion of project in minimum turnaround time effective resource utilisation to maximize the output.
Ensuring preventive maintenance of networks including schedules / shutdown maintenance to ensure trouble-free and seamless operations.
Preparing various project reports for identifying areas of obstruction / defects, conducting troubleshooting, service and repair to rectify the network.
Core Competencies
Project Engineering
Monitoring projects with respect to cost, resource deployment, time over-runs and quality compliance to ensure execution of projects within the time & cost parameters.
Preparing bill of material & detail engineering; conducting project review meetings for evaluating project progress & taking adequate corrective actions, if required.
Handling programming software for CCTV, Access Control System and Security Systems.
Notable Accomplishments:
Steered efforts for streamlining the Bosch IP CCTV System and PCSC Access Control Systems including both hardware and software.
Successfully managed various classifieds projects.
Individually installed programs or trouble-shooted the system which eliminated the condition of External vendors and saved a lot of money for the company.
Effectively carried out the maintenance effectively so that the client can run the system with old device’s itself.
Effectively addressed major technical issues related to Access Control System Database Issue, changed the database to SQl Server 2008 after which the system became stable.
Significantly executed all assigned projects before the client desired time which led to client satisfaction.
Projects Accomplished
Installation and configuration of:
- Optical Cable for CCTV and Access Control Systems.
- Optical Converters (Both Transmitter and Receiver: VT1100, VT2100, VR1100, VR2100) both Single Mode and Multimode Optical Cable.
- Bosch Indoor Dome Camera.
- Bosch PTZ Camera and Bosch PTZ MIC Camera.
- EX80/82DXL EXTREM CCTV Outdoor Camera.
- Cisco Switches, Card Reader, Long Range Card Reader, Push to Exit Button, Magnetic Lock, Strike Lock, Biometric Figure Print and Door Contact Programming with PCSC Software ”Lincnet”.
- Intrusion Alarm System
- EPABX
- Automatic Gate
- Automatic Water Level Controller
- Public Address System
- CCTV System using Bosch Software BVMS 2.0.
- CCTV Camera's with Intelligent Video Motion Detection (IVMD).
- Backup Server and Data Restoration.
- CCTV and Access Control Central Servers.
- Installation of UTP and Optical Networks for CCTV and Access Control Systems.
- UPS for CCTV and Access Control Systems.
July 2013
To May 2014
Project Engineer
at Consolidated Gulf Co.[CGC], Doha, Qatar
Location :
Qatar - Doha
Execution of day-to-day technical installation and/or deals with service issues.
Focus on maintenance and repair within set time frame and according to defined process, service agreements and customer needs.
Completion of planned site / customer visits and resolves customer request / calls as dispatched.
Developed positive customer relationships, ensures pro-active feedback on and documentation of the customer"s equipment and systems status and of work completed.
Under general supervision, diagnose and repair systems malfunctions requiring specific technical knowledge and relevant qualifications as well as an understanding on time and material requirements. Seeks clarification and technical support where needed and escalates issues as appropriate.
Projects Accomplished
Installation and Commissioning of
- CCTV Camera systems
- Conventional Fire Hydrant & Fire Alarm System
- High Mast & Street Lights
- Intruder Alarm System
- Automatic Gate
- Automatic Water Level Controller System
Focus on maintenance and repair within set time frame and according to defined process, service agreements and customer needs.
Completion of planned site / customer visits and resolves customer request / calls as dispatched.
Developed positive customer relationships, ensures pro-active feedback on and documentation of the customer"s equipment and systems status and of work completed.
Under general supervision, diagnose and repair systems malfunctions requiring specific technical knowledge and relevant qualifications as well as an understanding on time and material requirements. Seeks clarification and technical support where needed and escalates issues as appropriate.
Projects Accomplished
Installation and Commissioning of
- CCTV Camera systems
- Conventional Fire Hydrant & Fire Alarm System
- High Mast & Street Lights
- Intruder Alarm System
- Automatic Gate
- Automatic Water Level Controller System
January 2009
To June 2013
Service Engineer
at KRS Automation
Location :
India
Service Support
Communication with customer upon arrival and before leaving the work site. Meets regularly with customer to become familiar with operating problems and reach full understanding of customer needs.
Keeps customer informed on the nature of service provided, outstanding issues, recommends system enhancement/upgrade/replacement and promotes the sale of change orders and/or additional labor & material work (L&M).
Advises and trains customer in system operations.
Documents work completed in a clear and concise way and promptly submits service reports.
Under general supervision, installs, starts up and successful commissioning of systems in line with defined regulations, standards, time and processes and client approval.
Communication with customer upon arrival and before leaving the work site. Meets regularly with customer to become familiar with operating problems and reach full understanding of customer needs.
Keeps customer informed on the nature of service provided, outstanding issues, recommends system enhancement/upgrade/replacement and promotes the sale of change orders and/or additional labor & material work (L&M).
Advises and trains customer in system operations.
Documents work completed in a clear and concise way and promptly submits service reports.
Under general supervision, installs, starts up and successful commissioning of systems in line with defined regulations, standards, time and processes and client approval.
August 2007
To December 2008
Industial Trainer
at NIET
Location :
India - Kerala
Industrial Trainer
Share on Facebook
Share on Twitter
Share Via Email