COSTAIN Abu Dhabi Company W.L.L
Total des années d'expérience :21 years, 4 Mois
Employer: COSTAIN Abu Dhabi Company W.L.L.
Client: ADGAS (dash island)
Project: Major Plant Overhaul Train-1
FROM SEP - 2003-PIPE FABRICATOR.
Client ; GASCO BUHASA
Project ; Major plant overhaul Train-1
From may -2004- PIPE FABRICATOR
Employer COSTAIN Abu Dhabi Company W.L.L.
CLIENT: ADGAS (DAS ISLAND)
PROJECT: MAJOR PLANT OVER HAUL TRAI- 2
EXPERIENCE IN MIDDLE EAST;
From march 2013 to till date- mechanical foreman
Employer ; COSTAIN ABUDHABI CO. WLL,
From march 2013 to till date- mechanical foreman
Employer ; COSTAIN ABUDHABI CO. WLL,
Client ; ADGAS (ABUDHABI GAS LIQFECTION CO, )
Project ; R & R ( RECOMMENDATION & REPAIR)
From dec 2011 to - 07-03 -2013 -PIPE FABRICATION FOREMAN.
EMPLOYER ; COSTAIN Abu Dhabi Company W.L.L.
Client ; ZADCO ( Zirku Island)
Project-1 ; Emergency Crude Sphere Inlet Manifold and HP Fuel Gas supply to Gas Turbine pipe work.
Project -2 ; Replacement of 6" Diesel Line To/From Jetty
Project -3 ; Replacement of 4" GRE Potable water line To/From jetty/Sedum The common Header.
From Dec 2007 to Nov 2011- Fabrication FOREMAN.
Employer; COSTAIN Abu Dhabi Company W.L.L.
Client ; ADMA-OPCO (DAS ISLAND)
Project ; REPLACEMENT OF BURRIED PIPE LINE OF STORRAGE IN STOREX ADMA -OPCO.
IN Seft 2007 DEC 2007 FABRICATION FOREMAN
EMPLOYER ; COSTAIN ABUDHABI CO. W.L.L.
Employer ; ADMA- OPCO (DAS ISLAND)
Project ; Jakum West Offshore plate form shut down.
From Dec 2006 to Oct 2007-PIPE FABRICATOR
Employer; COSTAIN Abu Dhabi co. W, L, L.
Client ; ADGAS (Dash Island)
Project ; SULPHER RECOVERY UNIT (S.R.U.
FROM JAN 2005-PIPE FABRICATOR;
Employer; COSTAIN Abu Dhabi Company W.L.L.
Client ; GASCO BUHASA
Project ; Major plant overhaul Train-1
From may -2004- PIPE FABRICATOR
Employer COSTAIN Abu Dhabi Company W.L.L.
CLIENT: ADGAS (DAS ISLAND)
PROJECT: MAJOR PLANT OVER HAUL TRAI- 2
Employer: COSTAIN Abu Dhabi Company W.L.L.
Client: ADGAS (dash island)
Project: Major Plant Overhaul Train-1
FROM SEP - 2003-PIPE FABRICATOR.
Employer: COSTAIN Abu Dhabi Company W.L.L.
Client: ADGAS (Dash Island)
Project: Major Plant Overhaul Train-2
FROM MAR -2002- TO MAY 2002- PIPE FABRICATOR.
EMPLOYER: COSTAIN ABU DHABI COMPANY W.L.L.
CLIENT: ADGAS \[das island\]
PROJECT: MAJOR PLANT OVERHAUL TRAN -3
EXPERIENCE IN INDIA
* Cenara tech services Mumbai as FABRICATOR from 1996 to 2000. Bharat Petroleum Corporation of India Ltd. Mumbai.
Client ; ADGAS (Dash Island)
Project ; SULPHER RECOVERY UNIT (S.R.U.
FROM JAN 2005-PIPE FABRICATOR;
Employer; COSTAIN Abu Dhabi Company W.L.L.
EMPLOYER: COSTAIN ABU DHABI COMPANY W.L.L.
CLIENT: ADGAS \[das island\]
PROJECT: MAJOR PLANT OVERHAUL TRAIN -1
FROM September 2013 TO NOV - 15 -2013 -MECANICAL FOREMAN.
respected to sir
sir i have 22 years experienci in oil & gas sector and i have worked with various clints in various company such as ADMA ABUDHABI MARINE OPARATING COMPANY IN DAS ISLAN ABU DHABI.
ADGAS ABUDHABI GAS LIQUEFECTION COMPANY IN DAS ISLAND ABUDHABI UAE AND.
ADMA IN OFFSHORE PLATEFORM JAKUM UUMSAIF IN ABUDHABI UAE
ZADCO ZAKUM DEVELOPMENT COMPANY IN ZADCO ISLAND IN ABUDHABI UAE IN ALLCOPANY IN COSTAIN COMPANY CLIENT ADMA ADGAS & ZADCO...
GASCO IN BHU - HASA IN ABUDHABI GAS INDUSTRIES LTD WAS CLIENT COMPANY EURO MECHANICAL & ELECTRCAL COMPANY LLC IN ALL CO. I HAVE WORKED AS MECHANICAL AND PIPPING FOREMAN SO I HAVE NEED A SELECTED PERFECT JOB PIPPING FOREMAN JOB
YOUR'S FAITHFULLY
(NAGESH IRA MAJALIKAR)
EMPLOYER ; EURO-MECHANICAL & ELECTRICAL CONTRACTING CO.
CLIENT ; GASCO BHUHASA ( NGL PLANT)
PROJECT ; GASCO -BHUHASA -2013 -TOTAL SHUTDOWN
EXPERIENCE IN INDIA
CLIENT ; GASCO BUHASA ABUDHABI GAS INDUSTRIES LTD
PROJECT ; GASCO BUHASA NGL PLANT 2013 TOTAL SHUTDOWN
EXPERIENCE IN MIDDLE EAST;
FROM SEPTEMBER 2013 TO NOVEMBER 2013 AS MECHANICAL FOREMAN
EMPLOYER ; EUROMECHANICA & ELECTRICAL CONTRACTING CO ABUDHABI UAE
Nagesh Majalikar 19/11/2013, ASED IN MARCH1993 IN M.I.T.I. AT SIDDER KARWAR KARNATAKA INDIA.
SUMMERY OF EXPERIENCE; TOTAL 20 YEARS EXPERIENCE IN MECHENICAL& FABRICATION CONSTRUCTION/ PLANT AS A, MECHENICAL & FABRICATION FOREMAN in various oil & gas plants. work under various clients like ADGAS, & ADMA, in das island ZADCO, IN ZIRKU ISLAND UAE, PRESENTLY WORKING AS FABRICATION FOREMAN IN COSTAIN ABUDHABI COMPANY WL.L. IN ZIRKU island in ZAKUM DEVELOPMENT CO. ZADCO. And ADGAS PROJECT R&RREPAIR & REPLACEMENT IN DAS ISLAND . AND EURO - MECHANICAL & ELECTRICAL CONTRACTING CO. AS MECHANICAL uae FOREMAN TO TILL DATE.
JOB RESPONSIBILITIES ; Site survey, preparing isometric drawings based on the site survey and plan drawing, P & I.D. DRAWINGS AND Fabrication and erection of processing and piping and pipe line, structural plate forms, pressurized vessels. Flange joints replacement of valves & pipe lines in process plant.
I have good practical experience in the following activities;
• Fabrication and erection of piping spools in carbon steels (API 5L GR.B, A105, A106, A333GR.B) stainless steels (SS, 316, 316I, LTCS, X52, P11, P22 ( inconel), CU-NI, GRE, and GRP materials for the new installation/modification/repairing activities.
PROCESS PLANT ACTIVITIES MECHENICAL JOBS SHUTDON JOB REPLACEMENT JOB & PROJECT JOB ETC
Experience in
1 taking the measurements, making the drawings, plant drawings, p& id drawings issomatric drawings according to sight requirements, project maintenance, shutdown jobs existing pipelines replacement pipelines jobs stuctural mechanical piping supports pre fabrication spool fabrication flange joints according to sight measurements valve replacements various tipes of instruments replacements.
2. New installation/Modification/repairing and Maintenance activities of the structural Member's (Beams, channels, Angles, SHS and Gratings)
3. Taking the measurements
4. After the NDT clearance carried out the hydro testing of the piping spools depend the line pressure and Flange rating with approved for hydro testing procedure.
5. Experience in removal/replacement of piping spools and valves for repairing activities, spading / Despading activities for SHUT DAWN
6. Have well Experience in the refurbish of fixed equipments especially in pressurized vessels, water filter separator heat exchanger and column dur ing the Shut Down of pipe line and plant.
7. Worked as a senior Fabricator for the fabrication and erection of jacket piping project at RELIENCE PETRO- CHEMICALS PLANT in India ( GUJRAT)
8. Have experience in the construction of the cooling tower and associated piping and mechanical works.
9. Have experience in the construction of Petro chemical Plant and its underground piping for fire water system.
10. Have good knowledge in the Hot Bolting and tighten the Bolts according with the line pressure.
11. Have experience in the leak testing of breaking flanges after final tighten in the Modification/ repair.
Familiar with permit to Work system. (PTW) and offshore safety procedures and standards. In PTW role is as performer. Have good experience in working in H2S environment. passed Fire watch Trainings. Good knowledge in Fabrication techniques, usage of all related tools, knowledge in piping system and having hands on experience.
Client ; ADGAS (ABUDHABI GAS LIQFECTION CO, )
Project ; R & R ( RECOMMENDATION & REPAIR)
From dec 2011 to - 07-03 -2013 -PIPE FABRICATION FOREMAN.
EMPLOYER ; COSTAIN Abu Dhabi Company W.L.L.
Client ; ZADCO ( Zirku Island)
Project-1 ; Emergency Crude Sphere Inlet Manifold and HP Fuel Gas supply to Gas Turbine pipe work.
Project -2 ; Replacement of 6" Diesel Line To/From Jetty
Project -3 ; Replacement of 4" GRE Potable water line To/From jetty/Sedum The common Header.
From Dec 2007 to Nov 2011- Fabrication FOREMAN.
Employer; COSTAIN Abu Dhabi Company W.L.L.
Client ; ADMA-OPCO (DAS ISLAND)
Project ; REPLACEMENT OF BURRIED PIPE LINE OF STORRAGE IN STOREX ADMA -OPCO.
IN Seft 2007 DEC 2007 FABRICATION FOREMAN
EMPLOYER ; COSTAIN ABUDHABI CO. W.L.L.
Employer ; ADMA- OPCO (DAS ISLAND)
Project ; Jakum West Offshore plate form shut down.
From Dec 2006 to Oct 2007-PIPE FABRICATOR
Employer; COSTAIN Abu Dhabi co. W, L, L.
Employer: COSTAIN Abu Dhabi Company W.L.L.
Client: ADGAS (Dash Island)
Project: Major Plant Overhaul Train-2
FROM MAR -2002- TO MAY 2002- PIPE FABRICATOR.
* Cenara tech services Mumbai as FABRICATOR from 1996 to 2000. Bharat Petroleum Corporation of India Ltd. Mumbai.
* The Tran sways India Ltd. Mumbai as FABRICATOR From1995 to 1996. BPCL MUMBAI.
* The Tran sways India Ltd. Mumbai as FABRICATOR From1995 to 1996. BPCL MUMBAI.
* U.B. Engineering Works Mumbai Bharat Petroleum corporation Of India Mumbai as Fabricator in to 1994 to 1995
* U.B. Engineering Works Mumbai Bharat Petroleum corporation Of India Mumbai as Fabricator in to 1994 to 1995
* With L &T at Nuclear Corporation Of India at Karnataka from 1993 to 1994 as SKILLED FITTER.
PERSONNEL DETAILS
*
* PERMANENT ADRESS KATNE HALGA BOLASHITTA KARWAR UTTER KANNADA KARNATAKA INDIA 581328
*
*
* LANGUAGES KNOWN: KANNADA. ENGLISH, HINDI, MARATHI, AND MALYALAM, KONKANI.
* ,
* RELEGION: HINDU,
* ,
PASSPORT DETAILS
PASSPORT NO: H 5874142
DATE OF ISSUE: 06/07/2009
DATE OF EXPIERY: 05072019
PLACE OF ISSUE: ABU DHABI
COMPUTER KNOWLADGE
OPERATING SYSTEM: WINDOWS 7
APLICATION: MS OFFICE
DECLARATION
I Hereby declare that all the above mentioned impormations are correct and true to the best of my knowladge and believe also I have hope you will be giving me a opportunity for servicing in your institution.
Yours faithfully. KARNATAKA INDIA
Nagesh Majalikar 19 -12 -2013,
* With L &T at Nuclear Corporation Of India at Karnataka from 1993 to 1994 as SKILLED FITTER.
PERSONNEL DETAILS
*
* PERMANENT ADRESS KATNE HALGA BOLASHITTA KARWAR UTTER KANNADA KARNATAKA INDIA 581328
*
*
* LANGUAGES KNOWN: KANNADA. ENGLISH, HINDI, MARATHI, AND MALYALAM, KONKANI.
* ,
* RELEGION: HINDU,
* ,
PASSPORT DETAILS
PASSPORT NO: H 5874142
DATE OF ISSUE: 06/07/2009
DATE OF EXPIERY: 05072019
PLACE OF ISSUE: ABU DHABI
COMPUTER KNOWLADGE
OPERATING SYSTEM: WINDOWS 7
APLICATION: MS OFFICE
DECLARATION
I Hereby declare that all the above mentioned impormations are correct and true to the best of my knowladge and believe also I have hope you will be giving me a opportunity for servicing in your institution.
Yours faithfully. place; Abu Dhabi
OBJECTIVES.A challenging position in professional organization where I would like to enhance my skill and work knowledge in conjunction with the companies' goals and objectives APLICATION FOR THE POST OF: Mechanical SUPERVISIOR ACADEMIC TECHNICAL QUALIFICATION: UP TO INTERMIDIATE APPEARING FOR H.S.C. EXAM PASSED, P.U.C. PRE-UNIVERCITY COLLEGE PASSED AND B, A, PASSED TECHNICAL QUALIFICATION ; SUCCESSFULLY COMPLETED I.T.I. IN TRADE OF FITTER, 2 YEARS PAASED IN MARCH1993 IN M.I.T.I. AT SIDDER KARWAR KARNATAKA INDIA.