نصار MOIN KHAN PMP®

MECHANICAL SUPERINTENDENT·SATCO

المملكة العربية السعودية

بكالوريوس, Mechanical

الخبرة العملية

مجموع سنوات الخبرة: 23 سنوات, 8 أشهر

MECHANICAL SUPERINTENDENT

نوفمبر 2019 - حتى الآن

SATCO

الجبيل، المملكة العربية السعودية

نوفمبر 2019 - حتى الآن

.
PROJECT : 098-C66R, JIC Development (JUBAIL KSA).
DESCRIPTION : Follow-up all Mechanical activities, coordinating with other discipline, review
drawings & Preparing Material requisition.
 Review Drawings as per applicable codes & standards.
 Deep knowledge of International Codes such as IPC, UPC, NFPA, ASHRAE and SMACNA.
 Verifying the existing utilities and prepare Shop Drawings.
 Preparing Field Change Documents (FCD) as per site requirement.
 Estimation of cost & Material for complete Electro - Mechanical work
 Co-ordinate with Electrical Department for Electro Mechanical Work
 Preparing material requisition & material takeoff for construction.
 Planning and scheduling of work activity for timely completion.
 Co-ordination with procurement department & supplier for material status

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: الهندسة

MECHANICAL SUPERINTENDENT

يونيو 2017 - أكتوبر 2019

SATCO

الجبيل، المملكة العربية السعودية

يونيو 2017 - أكتوبر 2019

Follow-up all Mechanical activities, coordinating with other discipline, review drawings & Preparing Material requisition.

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: التشييد والبناء

MECHANICAL SUPERINTENDENT

ديسمبر 2015 - مايو 2017

AL OSAIS CONTRACTING COMPANY

الجبيل، المملكة العربية السعودية

ديسمبر 2015 - مايو 2017

Follow-up all Mechanical activities, coordinating with other discipline, review drawings & Preparing Material requisition.

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: التشييد والبناء

QA/QC ENGINEER

أكتوبر 2012 - ديسمبر 2015

AL OSAIS CONTRACTING COMPANY

المملكة العربية السعودية

أكتوبر 2012 - ديسمبر 2015

(MECHANICAL)
PROJECT : 815-C12, Construction of 396 Villas and Secondary Infra Work (JUBAIL KSA).
DESCRIPTION : Implementation and Co-Ordination of Quality Control.
5. DURATION :

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: مراقبة الجودة

QA QC Engineer Mechanical

يوليو 2009 - سبتمبر 2012

REAL ESTATE DEVELOPMENT & INVESTMENT CO. LTD. (REDICO)

الجبيل، المملكة العربية السعودية

يوليو 2009 - سبتمبر 2012

Implementation and Co-Ordination of Quality Control.
 Implement proper Quality Plan, QC Procedure and Inspection Test Plan and coordinate with QA/QC Manager.
 Immediate action to prevent the occurrence of any Non-conformance.
 Review corrective actions recommended in Non-conformance Reports, initiate and verify corrective action to prevent occurrence of Non-conformity.
 Ensure site personnel follow the Quality Assurance System and assist in target of site personnel in QA/QC Systems.
 Responsible for independent testing laboratory activity.
 Ensure that all inspection and test are recorded on the proper format. Or checklist as indicated on the refer ITP and that all document is filed in a safe and secure manner.
 Review and prepare the documents for the QC activities and test packages updates all documents as per current status.
 Review the documents for the QC activities and test packages, update all packages with recent revised drawings.
 Preparing internal request for inspection (RFI).

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: مراقبة الجودة

MECHANICAL ENGINEER

أغسطس 2007 - فبراير 2009

BHARAT OIL & WASTE MANAGEMENT

أغسطس 2007 - فبراير 2009

Developing the Baseline and Project execution plan for Tank Cleaning Etc.
• Follow-up field construction work to ensure conformity with Project and Planning Requirement.
• Resolve construction related problem in coordination with senior/consultants/client.
• Material Approval Submittals and Site works/Inspection of all Material at site, Verification of
Work before start and during work shop inspection, material inspection to ensure compliance
with specified specifications.
• Estimation of different face of work. Preparing BOQ and verification of quantities. Site
mobilization and demobilization planning and execution.

مجال الشركة:: المحاسبة
الدور الوظيفي:: الهندسة الميكانيكية

MECHANICAL ENGINEER

مارس 2005 - فبراير 2007

HADI AL NAJRANI CO

مارس 2005 - فبراير 2007

PROJECT : SAUDI ARAMCO PROJECT (RAS TANURA KSA)
WORK DESCRIPTION:
• In-charge in the supervision of the projects as per specifications.
• Prepare list of materials, Equipment, Manpower requirements for the project.
• Monitor and supervise the project as per required project plan/specification from mobilization
to demobilization.
• Preparation of shop drawings, if there is a revision in the drawings.
• Retrofit packing removal/replacement from vessel shell. (Udailiyah). (GOSP Saudi Aramco).
• Oil Tank Cleaning and Oil Sludge Treatment work by TAIHO COW PROCESS Japan. (Al-Khafji
Joint Operations). HNE is the Middle East Sole Representative for TAIHO Industries, recovery and
sludge treatment. Using the advanced TAIHO Technology and TAIHO Equipment and processes
HNE provides the following specialist services.
a) Tank cleaning-on shore facilities, ships and barrages.
b) Sludge treatment.
c) Sludge analysis.
d) Oil recovery on an offshore.
e) Consultation and site survey.
• Re-furbishing of valve boxes at Najmah, Community Utilities Division. RasTanura Saudi Aramco.
• Construction of Parking Shed and Office Building at Saudi Iron Steel Company (HADEED).

الدور الوظيفي:: الهندسة الميكانيكية

QA/QC ENGINEER

نوفمبر 2001 - ديسمبر 2004

BST ENGINEERING & CONSTRUCTION CO. LTD

نوفمبر 2001 - ديسمبر 2004

Site supervision and implementation of the job as per drawing of the project.
• Fabrication and erection of piping supports as per drawing and installation of different types
and sizes of valves.
• Gasket verification, bolt tightening as per rating and dimension and visual checking after
tightening of bolts.
• Total supervision of cleaning the pipe of buffing or sandblasting, panting and warped coat and
holiday detection of the underground piping.
• Inspection of pipelines and making punch lists hydro testing inspection of all process and utility
lines.
• Planning, fabrication, erection and execution of major pipelines like that carbon steel, stainless
steel, for different sizes and schedule structural fabrication.
• Preparation of schedule for welding activity.
• Preparing and submitting daily welding report and necessary Documents of inspection.
• Monitoring the following activities before and during the job: -
 Visual inspection of the pipe and all fittings.
 Edge preparation.
 Fit up of pipe.
 Welding of the pipe.
 D.P.T.
 Pre heat post heat, stress reliving if required.
 Radiography.
• To collect material from store to work site for edge preparation grinding, cutting, welding and
fabrication of pipe. Fitting and erection of fabricated pipe. As per drawings.
• For underground piping: Patch welding during annual maintenance works, cutting, warping.

الدور الوظيفي:: مراقبة الجودة

التعليم

Kuvempu UniversityBihar Intermediate Educational Council

يناير 1997

بكالوريوس، Mechanical

الهند

courses: Karnataka with 1ST Class.

Kuvempu UniversityBihar Intermediate Educational Council

يناير 1997

بكالوريوس، Mechanical

الهند

Bachelor of Engineering in Mechanical

Skills

HVAC

Expert

HVAC

Expert

Inspection

Expert

Inspection

Expert

Installation

Expert

Installation

Expert

Action Planning

Expert

Action Planning

Expert

MECHANICAL

Expert

MECHANICAL

Expert

SUPERVISORY SKILLS

Expert

SUPERVISORY SKILLS

Expert

CONSULTING

Expert

CONSULTING

Expert

EDGE

Expert

EDGE

Expert

GRAPHIC DESIGN

Expert

GRAPHIC DESIGN

Expert

MATERIALS MANAGEMENT

Expert

MATERIALS MANAGEMENT

Expert

MICROSOFT OFFICE

Expert

MICROSOFT OFFICE

Expert

MICROSOFT WORKS

Expert

MICROSOFT WORKS

Expert

OIL PAINTING

Expert

OIL PAINTING

Expert

mep

Intermediate

mep

Intermediate

materials

Expert

materials

Expert

mechanical aptitude

Intermediate

mechanical aptitude

Intermediate

maintenance engineering

Expert

maintenance engineering

Expert

pumps

Intermediate

pumps

Intermediate

maintenance management

Intermediate

maintenance management

Intermediate

mechanical testing

Intermediate

mechanical testing

Intermediate

mechanical analysis

Intermediate

mechanical analysis

Intermediate

HVAC

Expert

HVAC

Expert

Inspection

Expert

Inspection

Expert

Installation

Expert

Installation

Expert

Action Planning

Expert

Action Planning

Expert

اللغات

الانجليزية

المستوى: متمرّس

الهندية

المستوى: متمرّس

الأوردو

المستوى: متمرّس

العضويات

Project Management Institute

Scope is the defined features and functions of the scope of work needed to finish a project.

November 2020

التدريب و الشهادات

التدريب

Project Management Professional

Project Management Institute | PMI

Nov 2020

عرض الشهادات

 Attended Certified Welding Inspector (CWI) Programs of American Welding Society (USA

IQC Training and Service Pvt. Ltd.

Mar 2008

التوصيات

Mohd Khurram Usmani

أبريل 2012

Senior Planning Engineer•Colleague

Mr. Nasir Moin khan is very professional in Quality Control and Quality Assurance of Mechanical Work of Current project of Construction of Schools in Jalmudah. He is very hard working and devoated to work and succefully support of qaulity for two other project of 417 villas project with all testing and commsioning of HVAC and Plumbing & drainage system. All work of Techical submital passed through him.Presently all project under client as Royal Commsion of Jubail and Yanbu with approved status as Code 1 QC Mechanical.