Total Years of Experience: 10 Years, 11 Months
January 2023
To Present
Ei Engineering Lead
at Red Sea Gateway Terminal
Location :
Saudi Arabia - Jeddah
• Collaborate with third parties on system build and integration testing.
• Create technical specifications, test plans and documentation.
• Develop a framework and process to manage business risk in chartering operations.
• Develop strategic plans and roadmaps based on business drivers.
• Encourage innovation and efficiency improvements to ensure processes are productive.
• Establish budget for the business unit, financial statements and performance.
• Monitor the life cycle of the port equipment to introduce end-of-life measures.
• Oversee the development of training roadmaps for the engineering team.
• Perform quality control checks.
• Provide technical advice on feasibility, cost and timeline of port equipment projects.
• Set milestones, communicate project status, and identify or address setbacks.
• Submit reports on port equipment performance and efficiency.
• Support troubleshooting during installation and start-up.
• Validate the selection of core equipment components based on the system and organization requirements.
• Create technical specifications, test plans and documentation.
• Develop a framework and process to manage business risk in chartering operations.
• Develop strategic plans and roadmaps based on business drivers.
• Encourage innovation and efficiency improvements to ensure processes are productive.
• Establish budget for the business unit, financial statements and performance.
• Monitor the life cycle of the port equipment to introduce end-of-life measures.
• Oversee the development of training roadmaps for the engineering team.
• Perform quality control checks.
• Provide technical advice on feasibility, cost and timeline of port equipment projects.
• Set milestones, communicate project status, and identify or address setbacks.
• Submit reports on port equipment performance and efficiency.
• Support troubleshooting during installation and start-up.
• Validate the selection of core equipment components based on the system and organization requirements.
January 2021
To December 2022
Senior Reliability Engineer
at Red Sea Gateway Terminal
Location :
Saudi Arabia - Jeddah
• Asset management.
• Used RCM analysis on equipment to develop effective maintenance strategies to manage risk and improve reliability of assets.
• Lead the ISO preparation team for the reliability department support by familiar ISO9000 philosophies yielding operationally profitable results.
• Perform FMEA on new and existing product to identify failure modes and their severity on the system performance.
• Participate in reviewed/approve plus corrective and preventive actions (CAPA) relate activities, including CAPA ownership if appropriate.
• Develop and maintain methods, operation sequences and processes in the manufacture of sub-assemblies and final assemblies as per APQP.
• Build and maintain PC's in a wide spectrum of hardware to guarantee quality performance for end users.
• Use Minitab to analyze product variability, lot distributions and sampling characteristics.
• Used RCM analysis on equipment to develop effective maintenance strategies to manage risk and improve reliability of assets.
• Lead the ISO preparation team for the reliability department support by familiar ISO9000 philosophies yielding operationally profitable results.
• Perform FMEA on new and existing product to identify failure modes and their severity on the system performance.
• Participate in reviewed/approve plus corrective and preventive actions (CAPA) relate activities, including CAPA ownership if appropriate.
• Develop and maintain methods, operation sequences and processes in the manufacture of sub-assemblies and final assemblies as per APQP.
• Build and maintain PC's in a wide spectrum of hardware to guarantee quality performance for end users.
• Use Minitab to analyze product variability, lot distributions and sampling characteristics.
July 2018
To December 2020
Reliability Engineer
at Red Sea Gateway Terminal
Location :
Saudi Arabia - Jeddah
• Analyzed current business plan, identified inefficiencies.
• Utilize IR, laser, and probing techniques that lead to the identification of new failure mechanisms.
• Compile and analyze equipment repair and failure data to improve system reliability and maintainability.
• Conduct detail RCA and prepares logic tree report in accordance with establish best practices.
• Perform failure mode and effect analysis (FMEA) and block diagram modeling for various newly design products and systems.
• Used technical specifications, sketches, manuals, drawings, forms and publications to complete work assignments.
• Apply International standards of maintenance programs.
• Enhance equipment reliability.
• Utilize IR, laser, and probing techniques that lead to the identification of new failure mechanisms.
• Compile and analyze equipment repair and failure data to improve system reliability and maintainability.
• Conduct detail RCA and prepares logic tree report in accordance with establish best practices.
• Perform failure mode and effect analysis (FMEA) and block diagram modeling for various newly design products and systems.
• Used technical specifications, sketches, manuals, drawings, forms and publications to complete work assignments.
• Apply International standards of maintenance programs.
• Enhance equipment reliability.
November 2015
To November 2017
Electrical Foreman
at Arabian Contractor Company
Location :
Saudi Arabia - Mecca
• Manage a crew of members and Apprentices.
• Read and interpret drawings, schematics and electrical code specifications to determine layout of electrical equipment installations.
• Install, examine, maintain or repair electrical wiring, receptacles, switch boxes, conduits, feeders, lighting fixtures and other electrical components.
• Troubleshoot and repair, electrical and low voltage control systems.
• Arrange and coordinate site requirements.
• Delegate tasks and responsibilities to crew members.
• Be the point of contact with the general contractor’s site superintendent.
• Supervise and train apprentices on the job, as required.
• Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements through reporting violations of policies, procedures and guidelines to immediate supervisor.
• Controlling inventory on truck, job-site, and in/out of stock (for active jobs).
• Organize and maintain material lists for crew.
• Work with building principals and supervisors to complete projects.
• Read and interpret drawings, schematics and electrical code specifications to determine layout of electrical equipment installations.
• Install, examine, maintain or repair electrical wiring, receptacles, switch boxes, conduits, feeders, lighting fixtures and other electrical components.
• Troubleshoot and repair, electrical and low voltage control systems.
• Arrange and coordinate site requirements.
• Delegate tasks and responsibilities to crew members.
• Be the point of contact with the general contractor’s site superintendent.
• Supervise and train apprentices on the job, as required.
• Maintain a safe work environment by adhering to all company guidelines and OSHA safety requirements through reporting violations of policies, procedures and guidelines to immediate supervisor.
• Controlling inventory on truck, job-site, and in/out of stock (for active jobs).
• Organize and maintain material lists for crew.
• Work with building principals and supervisors to complete projects.
August 2013
To July 2015
Power Service Technician
at Saudi Aramco
Location :
Saudi Arabia - Alahsa
• Perform preventive maintenance, installation, commissioning, testing, repairing, analyze results and troubleshooting the following types of equipment such as 480V through 230KV switchgear, oil/air/gas/vacuum circuit breakers, substation power transformers, pad-mounted transformers, and etc.
• Perform repairs, installs/maintains all types of transmission and distribution high voltage cables such as, solid dielectric (rubber and synthetics) cables, paper insulated lead covered (PILCA) cables, low pressure oil filled (LPOF) cables, and etc.
• Utilize various types of testing and measuring equipment such as: TTR, insulation resistance, and interpret all tests results.
• Conduct field repairs on electrical and mechanical components of oil circuit breakers.
• Perform commissioning tests on new equipment, recommending final acceptance list exception items, if any.
• Supervise excavation to expose cable faults and loaded/unloaded cable.
• Perform potential testing, Hi-POT testing on Power Cables.
• Train subordinate technicians in advanced diagnostics, troubleshooting, test, repair, and maintenance procedures/methods.
• Practice good housekeeping, including jobsite cleanup, conforms to safety standards, rules, and practices and requires it in others.
• Perform repairs, installs/maintains all types of transmission and distribution high voltage cables such as, solid dielectric (rubber and synthetics) cables, paper insulated lead covered (PILCA) cables, low pressure oil filled (LPOF) cables, and etc.
• Utilize various types of testing and measuring equipment such as: TTR, insulation resistance, and interpret all tests results.
• Conduct field repairs on electrical and mechanical components of oil circuit breakers.
• Perform commissioning tests on new equipment, recommending final acceptance list exception items, if any.
• Supervise excavation to expose cable faults and loaded/unloaded cable.
• Perform potential testing, Hi-POT testing on Power Cables.
• Train subordinate technicians in advanced diagnostics, troubleshooting, test, repair, and maintenance procedures/methods.
• Practice good housekeeping, including jobsite cleanup, conforms to safety standards, rules, and practices and requires it in others.
Share on Facebook
Share on Twitter
Share Via Email