Furniture Technician/Assembler
Option Furniture Centre LLC
Total des années d'expérience :15 years, 6 Mois
Furniture Technician/Assembler
Option Furniture Centre LLC. Dubai, UAE - March 27, 2005 - March 31, 2011
Abu Dhabi, UAE Email: noel_gannaban@yahoo.com
Mobile: + 971502818736
locks, catches, and latches, using power drill and hand tools. May slide drawers in and out to test ease of movement, and adjust ill-fitting drawers, using hand tools.
None Destructive Testing Technician Dec 01, 2004 - Feb 15, 2005
• Exotherm Ajman UAE
Key Responsibilities:
NDT-Nondestructive testing, MT - Magnetic Particle Testing, PT - Dye Penetrant Testing, RT - Radiographic Testing.
• To ensured that all individuals using radiation equipment are appropriately trained and supervised.
• Ensuring that all individuals using the equipment have been formally authorized to use the equipment.
• Ensuring that all rules, regulations, and procedures for the safe use of radioactive sources and X-ray systems are observed.
• Ensuring that accurate records of the use of the sources and equipment are maintained.
• Ensuring that required radiation surveys and leak tests are performed and documented.
• Ensuring that systems and equipment are protected from unauthorized access or removal
Office Assistant Sept 02, 2002 - Oct 22, 2004
• Phil-Am Life Phil-Am Life Bldg. Paseo Roxas Corner Ayala Avenue Makati Manila Philippines
Key Responsibilities: • Filling documents as per the requirement of the office managers or updating files and registers related to attendance and work of the staff.
• Making copies of the documents, as assigned by the office managers and also according to the needs of the office. • Answering and receiving phone calls
• Sending faxes in matters related to the office jobs and related works.
• Works of daily errands, that include handling communications with post office, bank, etc and providing stationery, staples etc.
• Monitoring the order supplies related to the office.
• Distributing the incoming mails to the respective staff.
• Maintaining and organizing the paper and electronic documents. Storing them properly for future reference.
• Keeping the list of employee communication and contacts updated.
• Assisting the concerned authorities in matters related to preparation of annual reports, files, and weekly reports.
Abu Dhabi, UAE Email: annabelle_pm@yahoo.com
Mobile: + 971502818736
Counter Clerk Laboratory Printer July 1, 1999 - January 31, 2001
Kodak Citi Kolor Photo Lab. Madaluyong Merto Manila Philippines
• Print the pictures with a right density and color. Replenishing or filling-up of chemicals such as Stabilizers and fixers must be done by a printer. A safety measure is necessary.
• If the machine needs to be updated, call the main office of Kodak Company and ask or request for the assistance of the Kodak's representative technician.
• Ensures the Customer's satisfactory.
Utility Clerk/ Warehouseman
• SM Shoemart/ Homeworld Harrison Plaza, Manila Philippines
Oct 22, 1998 - March 22, 1999
• Robinsons Galleria Ortigas Ave. Edsa Manila Philippines
Nov. 20, 1997 - April 20, 1998
Key Responsibilities:
Check and secure all the stocks and are properly arranged (supplierwise) . Cleanliness and safety is necessary. Replenishing of the items in the display area or showroom must be done properly. Always check the availability of the Stocks..
Receives and inspects all incoming materials and reconciles with purchase orders; processes and distributes documentation with purchase orders; reports, documents and tracks damages and
discrepancies on orders received.Makes intra- and inter-campus deliveries of requested surplus office furniture and merchandise;maintains records of all deliveries.
Fills supply requisitions; assists buyer to order adequate merchandise and supplies; delivers orders to faculty and staff.Receives, stores, tags and tracks surplus property; prepares property lists for items to be sold at auction.Receives and stores documents and confidential files; maintains record of approved document andconfidential file destruction. Ships canceled and damaged items back to vendors as appropriate.Delivers and sets up furniture for various campus events as requested.Handles and documents storage and transportation of hazardous materials.Maintains the warehouse, records area and stores area in a neat and orderly manner.Answers questions regarding procedures and resolves discrepancies regarding receipts, deliveries, warranties, repairs and surplus property.
Station Attendant/Loader - RAMP Department
• Synergy Corporation (now Excellent Workers Inc.) Philippine Airlines Compound and Ninoy Aquino International Airport Terminal 1.
May 1995 - Oct 1997
• MIASCOR Manila Interrated Airport Services Corporation 4th Floor, IPT Bldg. Nonoy Aquino International Airport Pasay City, Manila Philippines 1300
September 22, 1993 - December 22, 1993
Overall Responsibilities: Ensures the baggage's safety when loading it to the Aircraft without damaging the bags and luggage.
Build-up and Break-down of baggage in the container to the conveyor.
Checking of all the safety belts, headrests, seat bags, pillows, blankets, and the safety manuals of the aircraft. Cleaning of the Lavatory, Gallery, carpet or flooring and other parts of the aircraft cabin especially the life vest.
Checking and Cleaning of the Landing gears, wing flaps and aileron. And the fuselage including the Vertical and Horizontal Stabilizers. And wind shields
Airframe and Power Plant Mechanic Assistant Dec 20, 1992 -Sep 20, 1993
• Aerostar Services Inc. Manila Domestic Airport Philippines
Key Responsibilities: • Servicing landing gear wheel bearings, such as cleaning and greasing.
• Replacing any cowling not requiring removal of the propeller or disconnection of flight controls.
Propeller-Check:
Engine-Check: Check engine oil for quantity and condition. Change oil and oil filter, check screens. Check oil temperature "sensing" unit for leaks, security, and broken wires. Check oil lines and fittings for condition, leaks and security, and evidence of chafing. Check oil cooler for condition (damage, dirt and air blockage), security, and leaks. Clean engine. Check cylinders for loose or missing nuts and screws, cracks around cylinder hold-down studs, and for broken cooling fins. Check crankcase for cracks, leaks, and missing nuts. Check engine mounts for cracks or loose mountings. Check engine baffles for cracks, security, and foreign objects.
Cabin-Check: Cabin door, latch, and hinges for operation and worn door seals. Upholstery for tears.
Seats, seat belts, and adjustment hardware. Rudder pedals and toe brakes for operation and security.
Parking brake. Windshield, doors, and side windows for cracks, leaks, and crazing.
Wings-Check: Wing tips for cracks, loose rivets, and security. Position lights for operation. Aileron and flap hinges and actuators for cleanliness and lubrication. Aileron balance weights for cracks and security.
GENERAL
Ensure that the aircraft is in compliance with all applicable Airworthiness Directives (AD) and the compliance has been properly recorded in the aircraft records. If the AD involves recur-ring action, you should know when the next action is required.
Comply with recommended service bulletins and service letters.
Disassembly and Vacu Blasting (On the Job Training) -with certificate
Philippine Airlines Engine OverHaul Division Oct 27 1992 - Dec 11, 1992
Villamor AirBase Manila Philippines
Key Responsibilities: • Assist in cleaning of TRF Assembly, exhaust Pipe & SPD Shroud and assorted Engine parts
• Assist in cleaning of APY shaft HPT, STG. 3 vanes and transmission G/B#3 using solvent.
• Cleaning of bolts and nuts using solvent and nozzle support engine mount bolts
• Post cleaning of accessory gearbox housing & removal of grease and dirt in bolts and in nuts using solvent.
• Assist in cleaning of geneva cam roller shaft, Cleaning of Cylinder Assy. and LPT cooling manifold.Solvent wash of engine mount assembly,
• Post cleaning of LPT stg. 1 nozzle guide vanes. Dry blasting of LPTR stg. 4, 3 seal.
• Solvent wash of bolts, nuts and springs.Post cleaning of CF6 fan blades
• HPC and Fan blades post cleaning.
• Assist in Fwd engine mount assy. Cleaning. Assist in removal of ETV. in stage 1 vanes
• Cleaning of chemical tanks .Dry blasting of inter stage seal dump valve and performed inventory of CF^ engine parts.Assist in cleaning assorted engine parts and cleaning of NGV stage 2 vanes
• Cleaning of the engine mount and CF6engine parts and Turbine rear frame.
Scad Company Ltd, EPZA Cavite Philippines October 1988 - November 1989
Key Responsibilities: To perform some type of set-up or assembly of the product, this may also include demonstrating to the buyer or customer how to operate the product. Knowledgeable about the product line and have the ability to make suggestions, keeping records of what goods were delivered to whom and at what time.
Possess the ability to interpret maps and follow directions, punctuality, interpersonal and communication skills. Physical strength, manual dexterity and familiarity with hand tools such as wrenches or screwdrivers etc. necessary for assembly is also required.
Assembles wooden parts or assemblies to form sections, frames, or complete articles of furniture: Trims joints to fit, using hand tools. Blows dust from mortises and areas to be glued. Spreads glue on surfaces to be joined by drawing wood across roller partially submerged in glue, by using brush dipped in glue, or by using glue-filled squeeze bottle. Knocks connecting parts together with mallet or compresses assembled parts in clamp until glue has dried. Wipes excess glue from joints with rag.
Drills holes and drives screws into parts to join parts or to reinforce glued joints, using power drill and screwdriver. Inspects and verifies accuracy of assembled article for conformance to specified standards, using square and tape measure. May drill holes and attach hardware, such as drawer guides, drawer
PATTS COLLEGE OF AERONAUTICS March 1992 Sucat Paranaque City Philippines Aircraft Technician