أوليفر مانالانج

1. Company Name : PARSONS Overseas Limited
Position Title : Assistant Resident Engineer
Role : Civil Engineer - Bridge/MSE Wall- (60004 Package)
: Quality Assurance Engineer - (60004 Package)
: Assistant Resident Engineer - (60005 Package)
: Quality Assurance Engineer - (60005 Package)
: Interface Engineer - 60005/60004 Package
Specialization : Engineering & Consultant
Projects : 60004 Event Infrastructure - Bridge/MSE Wall
60005 Village Supporting Infrastructure
: 50052 Emergency Aid Center and Security Check Points
Client : BUREAU EXPO DUBAI, EXPO 2020
PMC : CH2MMace
Contractors : BESIX-ORASCOM JV, TRISTAR Engineering
: Red Sea
Date Joined : June 24, 2018
Date Left : Present



Work Description :

1.Deputies for Construction Director, Interface Manager, Resident Engineer and helping the Quality Assurance Manager in handling and supervising the Projects.
2. Assessing, Reviewing and providing preliminary approval through ACONEX workflow procedure for the Contractor's, Shop Drawing vs Design Drawings, Method Statement Submittals, Testing and Commissioning Procedure, Material Submittals, Sustainability Management Plan and Environmental Management Plan, Contractor’s Project Quality Plan. Materials Approval Request, Clash Analysis between utilities.
3. Responding to Contractor’s Request for Information (RFI’s), in particular for the Bridge Project.
4. Attend Site Inspection and oversee establishment and execution of quality assurance/control plans.
5. Attend Site Inspection at every interface matters between other contractors and for 60005/60004 package.
6. Review, analyze and provide approval for every CTP (Clearance to Procced) application from other Contractor in order for them to start working in the area affected scope by POL.
7. Attending Progress Meeting with Contractor and Client.
8. Preparing Register Logs and Right First Time (RFT) Register to be submitted to the Client Representative i.e., Shop Drawings, As-Built Drawings, Inspection Requests, Method Statement, Plan, Procedure, Reviewing O&M Manual in DOME Connect and other related documents.
9. Assisting the Quality Manager in preparing Weekly report for SOR and NCR to be submitted to PMC.
10. Assisting the Quality Manager for the preparation of questionnaires for the Contractor's Internal Quality Audit in Accordance with the Assurance Minimum Standard.
11. Attending the Contractor's Internal Audit.
12. Assisting the Resident Engineer in the preparation for the project Close-out.

2. Company Name : PARSONS Overseas Limited
Position Title : Assistant Resident Engineer
Role : Civil Engineer/QA Engineer
Specialization : Engineering & Consultant
Projects : 60005 Village Supporting Infrastructure
: 60004 Event Infrastructure
: 60020 Al Wasl Truck Tunnel
: 50050 Site Access Roads
: 50017 Site Wide Logistics
: 50052 Emergency Aid Center and Security Check Points
Client : BUREAU EXPO DUBAI, EXPO 2020
PMC : CH2MMace
Contractors : TRISTAR Engineering Corporation
: BESIX-ORASCOM JV
: Al Futtaim Carillion JV
: Khansaheb
: Laing O’Rouke
: Red Sea
Date Joined : August 4, 2016
Date Left : June 23, 2018
Work Description :

1. Deputies for Resident Engineer and helping the Quality Assurance Manager in handling and supervising the Projects.
2. Assessing, Reviewing and providing preliminary approval through ACONEX workflow procedure for the Contractor's, Method Statement Submittals, Testing and Commissioning Procedure, Material Submittals, Sustainability Management Plan and Environmental Management Plan, Contractor’s Project Quality Plan.
3. Assessing, reviewing and inspection of materials delivered at site through Material Inspection Request (MIR).
4. Attend Site Inspection and oversee establishment and execution of quality assurance/control plans.
5. Preparing Register Logs and Right First Time (RFT) Register to be submitted to the Client Representative i.e., Shop Drawings, As-Built Drawings, Inspection Requests, Method Statement, Plan, Procedure and other related documents.
6. Assessing, Reviewing and providing preliminary approval through ACONEX workflow procedure for Shop Drawings versus IFC Drawing and As-Built Drawings vs Shop Drawings from the Contractor.
7. Assisting the Quality Manager in preparing Weekly report for SOR and NCR to be submitted to PMC.
8. Assisting the Quality Manager for the preparation of questionnaires for the Contractor's Internal Quality Audit in Accordance with the Assurance Minimum Standard.
9. Attending the Contractor's Internal Audit.

Project : Central development Zone: Looping & Separation of
Irrigation Ring Main (P042-C43) - Sir Bani Yas Island
Central development Zone: Additional Works Laying of
Potable Water Line
Relocation & Rehabilitation of Existing STP: P042-C63
Client : TDIC
Project Cost : 20, 000, 000.00AED
Contractor : Hilalco Bil Badi & Partners Contracting Company
Date Joined : September 28, 2013
Date Left : October 21, 2015

1.a Deputies for Resident Engineer and helping the Project Manager in handling and supervising the Projects.
2.a Coordinate Handing Over Schedules.
3.a Providing detailed information and coordinate Close-Out Report.
4.a Track status of project from cradle to grave with respect to approvals, coordination, etc.
5.a Report back as necessary to the Resident Engineer and PMC.
6.a Prepare, Monitor and report to management on the progress of all project activity including significant milestones, and any conditions, which would affect project cost or schedule.
7.a Responsible for Coordination with client and client’s requests.
8.a Attend Site Inspection and oversee establishment and execution of quality assurance/control plans.
9.a Preparing Register Logs i.e., IFC Drawings, Shop Drawings, As-Built Drawings, Inspection Requests and other related documents.
10.a Assessing, Reviewing and providing preliminary approval through workflow procedure for Shop Drawings/As-Built Drawings from the Contractor, Method Statement, Contractor’s Monthly Progress Report and Investigate and evaluate Material Submittals.
11.a Preparing Weekly Site Progress report to be submitted to PMC.

Industry : Strategic Tunnel Enhancement Program - Link Sewer
Date Joined : July 7, 2012
Date Left : September 15, 2013

1.a In-charge in preparing Letters to the authorities (i.e., ADSSC, ADDC, Transco, Tabreed) in order to acquire NOC.
2.a In-charge to all Instrumentation and Monitoring (I&M) installation.
3.a In-charge in reviewing weekly monitoring report to be submitted to the client
4.a In-charge in submitting weekly progress report for both Instrumentation and Geotechnical Boreholes to the client.
5.a Reviewing shop drawings for I&M Boreholes before submitting to the client.
6.a Submit Inspection request for all I&M works(i.e., trial trench, drilling)
7.a Attend weekly progress meeting with ERG (I&M Sub Contractor)

Industry : Hodariyat Bridge Project
Date Joined : February 25, 2010
Date Left : July 7, 2012

1. In-Charge to all JV subcontractors i.e., painting works, electrical works, special access platforms, metal works and asphalt works.
2. Prepare Monthly progress report for all JV works.
3. In-charge in any coordination to all sub contractors.
4. Submit Inspection request for all JV scope of works.
5. In-charge in submitting electrical shop drawing to the client.
6. In-charge in preparing site modification for all JV scope of works.
7. Attending monthly sub-contractors progress meeting.
8. Prepare costing and cost comparison to all quotations from all JV Sub-Contractors works.
9. Attending Inspection with Quality Control and QA representative

Industry : Saadiyat Bridge Project
Date Joined : February 12, 2008
Date Left : October 15, 2009

1.a In-charge in preparation of Stressing Protocols as per Pre-stressing Instructions prior to Stressing of Longitudinal Tendon, Transversal Tendon and External Tendon for Incremental Launching Method, Scaffolding Method and Form Traveler Method.
2.a In-charge to all proper documentation in Pre-stressing and Grouting Activities to be submitted to the client (PIL) and to the Designer (K+S) for final approval.
3.a In-charge in any coordination with the designer’s (K+S) with regards to any clarification about pre-stressing if in case there is a problem on site.
4.a Submit Inspection request for Pre Stressing and grouting activities to the client thru Aconex.
5.a Inspecting and checking of ducts, strands and wedges before stressing commence.
6.a Attending and witnessing Stressing of critical tendons i.e., long tendon and external tendon.
7.a Coordination on site during stressing.
8.a Attending and witnessing Site Calibration for all the jacks being used for Stressing.
9.a In-charge for the presetting, setting and installation of all the bearings.
10.a Quantity take off for all the materials as per plan i.e., concrete, rebar, PC Strand, Painting and other related quantity at site.
11.a Prepare Interim Payment Report and Invoice as per accomplishment on site.

Industry : Sea Water Pumps and Cooling Towers
Date Joined : September 1, 2006
Date Left : December 10, 2007

1.a Prepare Quality Verifying Documents (QVD) prior for Inspection.
2.a Review Inspection and Test Plan (ITP) prior for the preparation of Inspection Request to be submitted to the Client (FLUOR/YANSAB)
3.a Perform daily Inspection and Site Surveillance with client’s representative (FLUOR) to ensure the quality of work as per SABIC specification
4.a Checked and review the approved drawings i.e. rebar, formworks and drawing for embedded items.
5.a Review the approved method statement prior to application of the approved materials to be use on site i.e. painting, grouting and repairing.
6.a Preparing Progress Report, as well as all the As-Built drawings that would be submitted to the Client.
7.a Prepare all necessary documents prior to Quality Audit, conducted by the client.
8.a Preparing punch list report prior for rectification and Final Inspection.
9.a Prepare all Critical and Non Critical documents prior for handing over of the project.

Industry : Industrial Building - Rajhi Steel Plant
Date Joined : December 10, 2005
Date Left : September 1, 2006

1.a Prepare detailed quantities for all Structural Steel Member needed for erection.
2.a Prepare detailed Schedule for Erection of Steel Structures.
3.a Submit accomplishment report for all erected structural member.
4.a Monitoring of erection schedule if every activities are on time.
5.a Perform daily inspection during erection phase.
6.a Checking all the materials received at site as per packing list.
7.a Coordinating with the supplier (ICOM Engineering) for all missing materials or not received as per declared in the shipment/packing list.
8.a Checking and uploading all drawings (Erection/Structural/Shop) received from the designer, distributing a copy to the client and to the sub-contractor as well.
9.a Preparing monthly Invoice and Progress Report, as well as all the As-Built drawings that would be submitted to the Client.

1.a Over all Project Supervisor for all construction activities including monitoring of sites.
2.a Provide project solutions (if incase) to all problems encountered that may cause delay and formulate strategies to facilitate early completion of various projects.
3.a Attend meetings with the client to discussed progress, problems and project schedules.
4.a Check red line drawings prior to the preparation of As-Built plan.
5.a Perform weekly inspection during construction phase.

1.a Over all Project Supervisor for all construction activities including monitoring of sites.
2.a Provide project solutions (if incase) to all problems encountered that may cause delay and formulate strategies to facilitate early completion of various projects.
3.a Attend meetings with the client to discussed progress, problems and project schedules.
4.a Check red line drawings prior to the preparation of As-Built plan.
5.a Perform weekly inspection during construction phase.

1.a Over all Project Supervisor for all construction activities including monitoring of sites.
2.a Prepare and administer the budget for Operation Department
3.a Provide project solutions (if incase) to all problems encountered that may cause delay and formulate strategies to facilitate early completion of various projects.
4.a Prepare Periodic Cost Evaluation and Estimates related to the Over - All budget allocation for various projects.
5.a Attend meetings with the client to discussed progress, problems and project schedules.
6.a Check red line drawings prior to the preparation of As-Built plan.
7.a Prepared detailed quantities for all Completed Items (Civil) needed for reconciliation with the client.
8.a Perform weekly inspection during construction phase.
9.a Prepared Invoicing/Billings per cost center.