Total Years of Experience: 18 Years, 4 Months
February 2022
To Present
Senior Consultant - ICS/OT Cybersecurity
at EY (Ernst & Young LLP)
Location :
India - Ahmedabad
ICS / OT Cyber Security Governance, Policies and Procedures, Risk Assessment, Gap Assessments and Compliance.
August 2018
To February 2022
Lead Instrumentation and Control System Engineer
at WorleyParsons
Location :
Saudi Arabia - Khobar
Projects:
(1) South Area safety related facilities upgrade (Field F&G Devices, Fire Protection system and F&G system upgrade - Honeywell FSC to Safety Manager), EPC Contractor: ENPPI, Client: SAUDI ARAMCO-KJO, Khafji, KSA.
(2) Design & Engineering CO2 feedstock supply from SASREF to SIPCHEM, EPC Contractor: Gas Arabian Services, Client: SASREF, Jubail, KSA.
(3) Lead Engineer for Design and Engineering Services for SATORP Refinery Turnaround MOCs Client: SATORP (Saudi Aramco Total Refinery), Jubail, KSA.
(4) Lead Engineer for Design and Engineering Services for Saudi Aramco Abqaiq Plant urgent Restoration, Reinstatement and Improvement work facilities affected in attack. Client: SAUDI ARAMCO, Abqaiq Plant, KSA.
(5) Lead Engineer for System Performance Assessment for Existing Khafji Water Treatment Facilities-2, Client: SAUDI ARAMCO-KJO, Khafji KSA.
(6) Lead Engineer for Basis of Design and Basic Design Package for MOCs (Compressor Unloader, Replacing liquid Seal with Dry seal Gas for centrifugal compressors & Replacing existing SCOT chemical dosing skid with new), Client: SASREF, Jubail, KSA.
(7) Lead Engineer for Design and Engineering Services for Ma’aden Aluminum Refinery Growth Project 3 Nos MOCs (Fine Seed Surge Pump upgrade, Thickener Underflow and Sideline Pump Upgrade and New Seed Filtrate Pump) Projects, Client: Ma’aden, Ras Al Khair, KSA.
(1) South Area safety related facilities upgrade (Field F&G Devices, Fire Protection system and F&G system upgrade - Honeywell FSC to Safety Manager), EPC Contractor: ENPPI, Client: SAUDI ARAMCO-KJO, Khafji, KSA.
(2) Design & Engineering CO2 feedstock supply from SASREF to SIPCHEM, EPC Contractor: Gas Arabian Services, Client: SASREF, Jubail, KSA.
(3) Lead Engineer for Design and Engineering Services for SATORP Refinery Turnaround MOCs Client: SATORP (Saudi Aramco Total Refinery), Jubail, KSA.
(4) Lead Engineer for Design and Engineering Services for Saudi Aramco Abqaiq Plant urgent Restoration, Reinstatement and Improvement work facilities affected in attack. Client: SAUDI ARAMCO, Abqaiq Plant, KSA.
(5) Lead Engineer for System Performance Assessment for Existing Khafji Water Treatment Facilities-2, Client: SAUDI ARAMCO-KJO, Khafji KSA.
(6) Lead Engineer for Basis of Design and Basic Design Package for MOCs (Compressor Unloader, Replacing liquid Seal with Dry seal Gas for centrifugal compressors & Replacing existing SCOT chemical dosing skid with new), Client: SASREF, Jubail, KSA.
(7) Lead Engineer for Design and Engineering Services for Ma’aden Aluminum Refinery Growth Project 3 Nos MOCs (Fine Seed Surge Pump upgrade, Thickener Underflow and Sideline Pump Upgrade and New Seed Filtrate Pump) Projects, Client: Ma’aden, Ras Al Khair, KSA.
July 2017
To August 2018
Senior Instrumentation and control design engineer
at Tecnicas Reunidas
Location :
Saudi Arabia - Khobar
Projects (Greenfield):
(1) Jizan Refinery, IGCC, Utilities and Common area EPC Package-5, Client: SAUDI ARAMCO, Jizan, Kingdom of Saudi Arabia.
Projects (Brownfield):
(2) Ras Tanura Refinery clean fuels project, Naphtha Processing Facilities Package-1, Client: SAUDI ARAMCO, Ras Tanura, Kingdom of Saudi Arabia.
(1) Jizan Refinery, IGCC, Utilities and Common area EPC Package-5, Client: SAUDI ARAMCO, Jizan, Kingdom of Saudi Arabia.
Projects (Brownfield):
(2) Ras Tanura Refinery clean fuels project, Naphtha Processing Facilities Package-1, Client: SAUDI ARAMCO, Ras Tanura, Kingdom of Saudi Arabia.
July 2015
To June 2017
Instrumentation Engineer
at Saudi Arabain Kentz Co Ltd, (SNC Lavalin)
Location :
Saudi Arabia - Khobar
(1) FEED study of Control System Upgrade for existing ASAB-1 Gas Processing Plants of GASCO (Abu Dhabi Gas Industries Ltd.).
(2) FEED study of River Water Project for Shell Majnoon Oil Field - Iraq.
(3) Installation of additional Blower to Port Flare (S-chem, Jubail, KSA).
(4) DCS and Instrumentation Revamp, Client: Methanol Plant-III, AR-RAZI (Saudi Methanol Company, SABIC affiliate), Jubail, KSA, (EPC Contractor-Honeywell).
(5) Implementation of conversion of EDC dosing to EC dosing at EG-1 Plant, Eastern Petrochemical Company(Sharq), Jubail, KSA.
(6) Detailed Design Engineering for Independent Belt Filter Operation in Phosphoric Acid Plant at Maaden Phosphate Company, Ras Al Khair, KSA.
(7) Feasibility Study for installation of 2-Additional Instrumentation Air compressor and 3-Diesel Engine driven Air Compressors in Utility Plant at Petrokemya, Jubail, KSA.
(8) Wash Oil and Boiler Feedwater injection in Product Gas Compressor and Wash Oil Injection in Product gas heaters at PDH Plant, SPC-TASNEE, Jubail, KSA.
(2) FEED study of River Water Project for Shell Majnoon Oil Field - Iraq.
(3) Installation of additional Blower to Port Flare (S-chem, Jubail, KSA).
(4) DCS and Instrumentation Revamp, Client: Methanol Plant-III, AR-RAZI (Saudi Methanol Company, SABIC affiliate), Jubail, KSA, (EPC Contractor-Honeywell).
(5) Implementation of conversion of EDC dosing to EC dosing at EG-1 Plant, Eastern Petrochemical Company(Sharq), Jubail, KSA.
(6) Detailed Design Engineering for Independent Belt Filter Operation in Phosphoric Acid Plant at Maaden Phosphate Company, Ras Al Khair, KSA.
(7) Feasibility Study for installation of 2-Additional Instrumentation Air compressor and 3-Diesel Engine driven Air Compressors in Utility Plant at Petrokemya, Jubail, KSA.
(8) Wash Oil and Boiler Feedwater injection in Product Gas Compressor and Wash Oil Injection in Product gas heaters at PDH Plant, SPC-TASNEE, Jubail, KSA.
September 2014
To March 2015
Instrumentation Design Engineer
at UTS Kent LLC
Location :
India
Assigned Projects:
(1) FEED study of Control System Upgrade for existing ASAB-1 Gas Processing Plants of GASCO (Abu Dhabi
(1) FEED study of Control System Upgrade for existing ASAB-1 Gas Processing Plants of GASCO (Abu Dhabi
January 2014
To September 2014
Senior Manager
at Reliance Industries Ltd
Location :
India
Control System Engineering
Assigned Projects:
(1) Design and Engineering of Fire & Gas System at Reliance Petroleum, Rewari Petroleum Terminal (as per
M.B. Lal committee recommendation)
Assigned Projects:
(1) Design and Engineering of Fire & Gas System at Reliance Petroleum, Rewari Petroleum Terminal (as per
M.B. Lal committee recommendation)
September 2012
To January 2014
Engineer
at Samsung Engineering, Global Engineering Centre
Location :
Korea (South)
Control System Engineering
Assigned Projects:
(1) Basic Engineering for 2 X 600MW BTPP Project, Kazakhstan.
(2) Proposal Engineering for MIRFA IWPP Project
Assigned Projects:
(1) Basic Engineering for 2 X 600MW BTPP Project, Kazakhstan.
(2) Proposal Engineering for MIRFA IWPP Project
June 2010
To August 2012
Deputy Manager
at Adani Infra (India) Ltd, Corporate Engineering Group
Location :
India
Adani Infra (India) Ltd is a EPC company, which executes In-house Greenfield projects of ADANI
POWER LTD, having in-house capability of design engineering, project management, procurement, construction,
commissioning, start-up of the Plants.
POWER LTD, having in-house capability of design engineering, project management, procurement, construction,
commissioning, start-up of the Plants.
October 2007
To June 2010
Executive - E2, Instrumentation Design Engineer
at Larsen & Toubro – Sargent & Lundy Ltd
Location :
India
1 X 660 MW Coal Based Supercritical Thermal Power Plant
December 2005
To October 2007
Junior Engineer
at Gujarat State Electricity Corporation Ltd
Location :
India
Responsibilities at Wanakbori TPS:
• Preventive, Breakdown / Shut down maintenance of Instrumentation and Control System (Keltron - 9020,
Baily France and ILK - Transdata) for Boiler(700T/hr) and Turbines (210 MW LMW)
• Calibration of Transmitters, Pressure Switches, Valve Positioners etc.
• Inventory Management of Control & Instruments Spare Parts in Departmental Store.
• Preparing of purchase requisitions for Control & Instruments Spare Parts as per requirement.
• Preparing Calibration reports & Documentation as per ISO 9001:2000 and ISO 14001: 2004 procedures.
• Preventive, Breakdown / Shut down maintenance of Instrumentation and Control System (Keltron - 9020,
Baily France and ILK - Transdata) for Boiler(700T/hr) and Turbines (210 MW LMW)
• Calibration of Transmitters, Pressure Switches, Valve Positioners etc.
• Inventory Management of Control & Instruments Spare Parts in Departmental Store.
• Preparing of purchase requisitions for Control & Instruments Spare Parts as per requirement.
• Preparing Calibration reports & Documentation as per ISO 9001:2000 and ISO 14001: 2004 procedures.
ENGINEERING SKILLS
• Engineering Documents: Preparation & Review of engineering documents like-Design Basis & Philosophy,
Control system configuration diagram, Control Room Layout Drawing, Instrument Index, Instrument List, I/O
List, Control Narrative, Instrument specification sheet, Instrument installation Diagram, Instrument Location
Diagram, Cable Principle Diagram, Terminals Block diagrams & Interconnection wiring diagrams, Loop & Logic
diagrams, Cable Schedule, Datasheets & MTO for all Instrumentation equipments, etc.
• Automation System: Preparation & Review of DCS/PLC Specification, DCS Graphic displays, P & ID review,
Review of Drawings and Documents by DCS supplier, Scope of work & Supply division between packages, 3rd
Party Communication between DCS & PLC, Conducting DCS FAT at DCS Manufacturer Factory.
• Selection & Sizing of various Instruments: Selection of Field instruments, control valve sizing, flow element
selection and sizing using Software (Conval 7.0, Instrucalc 5.1, Flowel).
• Other Technical Skills: Vendor Print Review (i.e. Vendor Drawing/Document Review), Interdisciplinary
coordination and review, Technical review meetings with Vendors, Clients & Subcontractors, Support to
Procurement Team/ Technical Bid Evaluation(TBE), Support to Construction team & attending Site
Engineering Request (SER) & Revising Engineering deliverables in accordance with SER, Participation in
HAZOP workshop and Technical Audits
• Engineering Documents: Preparation & Review of engineering documents like-Design Basis & Philosophy,
Control system configuration diagram, Control Room Layout Drawing, Instrument Index, Instrument List, I/O
List, Control Narrative, Instrument specification sheet, Instrument installation Diagram, Instrument Location
Diagram, Cable Principle Diagram, Terminals Block diagrams & Interconnection wiring diagrams, Loop & Logic
diagrams, Cable Schedule, Datasheets & MTO for all Instrumentation equipments, etc.
• Automation System: Preparation & Review of DCS/PLC Specification, DCS Graphic displays, P & ID review,
Review of Drawings and Documents by DCS supplier, Scope of work & Supply division between packages, 3rd
Party Communication between DCS & PLC, Conducting DCS FAT at DCS Manufacturer Factory.
• Selection & Sizing of various Instruments: Selection of Field instruments, control valve sizing, flow element
selection and sizing using Software (Conval 7.0, Instrucalc 5.1, Flowel).
• Other Technical Skills: Vendor Print Review (i.e. Vendor Drawing/Document Review), Interdisciplinary
coordination and review, Technical review meetings with Vendors, Clients & Subcontractors, Support to
Procurement Team/ Technical Bid Evaluation(TBE), Support to Construction team & attending Site
Engineering Request (SER) & Revising Engineering deliverables in accordance with SER, Participation in
HAZOP workshop and Technical Audits
at Reliance Corporate IT Park Ltd, Reliance Engineering Group-MEC
Location :
India
• Alarm and Trip Schedule, Cause &Effect Diagrams.
• Designing of Instrumentation Hookups and Hookup MTO preparation.
• Designing of Foundation Fieldbus and Profibus-DP Segments with Yokogawa Centum CS-3000 DCS.
• Preparing MRQ/RFQ, Specification for DCS and ESD system.
• Preparing MRQ/RFQ, Specification and Datasheet for F&G Devices and F&G System.
• Validation of ESD I/O List and DCS I/O List with existing P&IDs.
• Participating in HAZOP workshops and updating P&IDs based on 3rd
Party/ Client’s in-house SIL and
HAZOP Recommendation.
• Smart Plant Instrumentation (SPI/Intools).
• Attending Technical discussion and Comment resolution meeting with clients and approval of engineering
deliverables from Client.
• Working knowledge of client standards and International standards like ISA, IEC, Shell DEP, SABIC, etc.
• Man Hours estimation for engineering proposals.
• Guiding junior colleagues for preparing engineering deliverables.
• Participating in departmental Quality and Technical Audits.
• Designing of Instrumentation Hookups and Hookup MTO preparation.
• Designing of Foundation Fieldbus and Profibus-DP Segments with Yokogawa Centum CS-3000 DCS.
• Preparing MRQ/RFQ, Specification for DCS and ESD system.
• Preparing MRQ/RFQ, Specification and Datasheet for F&G Devices and F&G System.
• Validation of ESD I/O List and DCS I/O List with existing P&IDs.
• Participating in HAZOP workshops and updating P&IDs based on 3rd
Party/ Client’s in-house SIL and
HAZOP Recommendation.
• Smart Plant Instrumentation (SPI/Intools).
• Attending Technical discussion and Comment resolution meeting with clients and approval of engineering
deliverables from Client.
• Working knowledge of client standards and International standards like ISA, IEC, Shell DEP, SABIC, etc.
• Man Hours estimation for engineering proposals.
• Guiding junior colleagues for preparing engineering deliverables.
• Participating in departmental Quality and Technical Audits.
Share on Facebook
Share on Twitter
Share Via Email