Distribution Engineer C
Saudi Electricity Company
Total years of experience :15 years, 8 Months
Switching operations for 33/13.8 kV Main Distribution Equipment and feeders.
Perform equipment switching out operations and restoring for equipment maintenance.
To controlling the system through SCADA using Siemens and AREVA software.
Issuing Work permits, tags and clearances and cancelling the permits after work completion considering the electrical safety of field operators with regular check of CAT-4 and PPE.
Continuous Monitoring feeders and load depending upon loading of corresponding feeder according to its limits.
Informing any abnormality corresponding to substation to respective department either maintenance or protection.
Close loop testing of New Substation.
Preparing failure reports in SAP notifications for cable faults.
As Project Engineer:-
• Worked at Jeur, Maharashtra for erection of 220/132/33KV, 100 MVA Transformer Plinth/foundation.
• Responsible for the Completion of projects within the stipulated time & resources.
• Determines appropriate revenue recognition, ensures timely and accurate invoicing, and monitors receivables for project.
• Ensured project documents are complete, current, and stored appropriately.
• Ensured site documentation is properly archived at Head Office at the end of every stage of the project.
• Looked after shifting of 132 KV capacitor bank and cable trenches.
• Procurement of material like control cables (2C, 7C, 12C & 19C) and it’s laying, metal, steel, cement & Sand at site.
• Monitored and Managed & maintain project status reports (Daily, weekly & monthly).
• Responsible for resources needed at site and assigns individual responsibilities to site engineer & supervisor.
• Handled more than 15 workers and supervisor
•Since April 2010 till April 2012 as Traction Power Controller & Maintenance engineer.
• To isolate and restore supply for the track and In-charge of operations during engineering or non-operation hours; including isolation of the power supply system, de-energisation during non-revenue hours, imposing track possessions and coordination of line side and non-line side worksites
• To Monitor and control of power network and traction power supply feed from substation (66KV, 33KV, 25KV & 440VAC)
• To Prepare Reports of Daily shift progress, Power Blocks, emergency blocks, Supply Failure record, staff movement record.
• Take-over / hand-Over the system to / from the Chief / Other Controller between operation and engineering hours.
• To issue Power Blocks to Authorized Person / Engineer Possession to work on track during non-revenue hours.
• To plan for periodic maintenance as per Power System and Installation representative requirement.
• Coordinate and keep the OCC Manager, Chief Controller, Train Controller, and Other controller informed in the event of a failure and during the take-over and hand-over of the shift charge, start-up and shut-down of service each day.
• Liaise between the operations team and maintenance staff management in respect to safety or service related failures and incidents.
• To ensure operation of Tunnel Ventilation Fans during Operation, Maintenance hour and emergency condition by coordinating with environment controller.
• Control of engineering activities requiring special trains like RRV & CMV during Emergency condition, track possessions, temporary isolation of equipment etc.
• Periodic Maintenance & Operation of 66/33/25 KV GIS Breaker’s/Panels along with 66/33kV, 66/25kV & 33/0.415kV transformers at Receiving Station.
• Routine Maintenance of Battery Bank, ACDB & DCDB & LT Panel Gas Flooding system.
• Preparing of maintenance program & staff shift duty roaster.
Worked as Operation Controller in SCADA Control Room to monitor, analyse, operated, load flow control using SCADA for Mumbai Suburbs.
Department: -
• To controller the system through SCADA.
• Continuous Monitoring and Controlling of all the electrical parameters of the entire network of RELIANCE ENERGY Mumbai electricity distribution system (1598 MW, 5200 S/S) with more than 30lac (HT & LT) consumers.
• Monitoring feeders and load balancing depending upon loading of corresponding feeder.
• Using DMS at substation level for load relieving and during isolation and restoration of supply at time of fault.
• To Isolate the faulty sections and restore the supply within shortest possible time for 33/11/0.415KV Cables.
• Operations for planned & breakdown maintenance.
• Coordinate and keep the MCC Manager and Other controller informed in the event of a failure and during the take-over and hand-over of the shift charge.
• To prepare database of the breakdown & outages, and daily progress reports.
• Maintaining voltage limits at Receiving Stations and also maintaining PF at receiving end.
• Planning Preventive maintenance of 33KV/22KV/11KV RMU Switch Gears and carrying out its load transfer operations, also for Power Transformers OLTC maintenance outages.
• Network Studies for improvement of existing Distribution system.
• Laying of Cable, Fault detection by pick up method.
• Erection of 11/0.415kV RMU in Mumbai Suburbs.
Passed from Government Engineering College Aurangabad. Major Subjects- Electrical Generation transmission and Distribution, Renewable energy, power electronics, Electrical Installation. Machine Design. Network Analysis