Junior Engineer
Associated Consulting Engineers
مجموع سنوات الخبرة :9 years, 6 أشهر
Prepared Workshop layout drawings, Engineers Offices and dormitories.
Supervision of Installation of Rail Track for Gantry Crane.
Supervision of Welding Works involved in assembling and installation of hydraulic gate
equipment. Major responsibilities include:
- Visual examination of work in progress and effective supervision of repair
procedures.
- Inspection of use of filler material depending on the base material so as they comply
approved welding procedures.
- Checking and quality inspection of welded joints during technical process and control
results.
- Checking and inspection of welds so as they should be performed in compliance with
Approved welding procedure (WPS).
- Coordination of welding activities for processes: SMAW, SAW, GMAW.
- Ensure that all Welding operations are executed in safe working environment and
implementation of standard welding rules.
- Inspection of welded joint geometries.
- Supervision of welding procedures tests and monitor welding works at site.
Inspection of welds before, during and after welding.
- Ensure implementation of Standard and Approved welding procedures.
- Ensure implementation of Standard Welding Safety Rules at site.
Conducted Inspection of Welding Works using following NDT Techniques:
- Radiographic Technique
- Ultrasonic Technique
- Dye-Penetration Technique
Monitored Anti Corrosion techniques Grit Blasting & Painting using Swedich Standards
Sa 2.5, Sa 3 & ISO 8501:7
Supervision of Paint Adhesion / Pull off & Holiday Test for Steel Liner epoxy paint.
Supervision of erection and commissioning activities at site.
Supervision of QA/QC activities at site
Conducted Inspection of Installed equipments which includes:
- Dimensional Checks
- Survey / Alignment checking
- Installation Methodology
Responsible to Review:
- Drawings / Design
- Design Calculations
- Method Statements
Assist Resident Engineer in:
- IPC (Payment Certificates) verification of Mechanical Works.
- Project Coordination with Client & Contractor.
- Technical issues
Preparation of Technical Reports / Letters.
Supervise the installation of commissioning of special designed hydraulic transportation
trolleys, transporter, gantry cranes used for the installation of liners
Reviewed the drawings of Mechanical Equipment under the supervision of Design Team
Leader - DTL
Responsible to conduct the PQR and WPQR under the supervision of Resident Engineer.
Drafting the Project Completion Report - PCR of my department.
Preparing Daily, Weekly, Monthly Progress Report of the executed works.
Member of HSE Committee from Consultants.
Auditing and Report any HSE negligence observed during Construction activities at Site.
Conducted Site inspections of the delivered Material, Equipment or plant from China.
Counter balancing the contractor’s manifest/weaknesses.
Provide Expertise in Steel Liner and mechanical equipment installation in Tunnel &
power house. Also involve planning, scheduling, monitoring and project control
activities.
Drafting Technical, Commercial, Administrative and Financial letters to the Contractor.
Conducted and attended various meeting with the Stakeholders to review the project
progress, on risk management, HSE Implementations etc.
Responsible to review and verify the contractor’s Estimations and Variation order and
Claims in accordance with the Contract Clause(s).
Certifying the Contractor’s IPC for the Completed works or stage wise payment.
Briefing the technical / learning site visits / delegations reading on going site activities
Standard & Code i have practiced are;
ASME Section IV, Section IX & AWS D1.1
ASME Section V & VIII
D3359 & & ASTM D5162
ASME B30, CMAA & AISC
BS 466
I have enjoyed a progressively responsible engineering career with Associated Consulting Engineers at Neelum Jhelum Hydroelectric Project (969 MW Hydroelectric Project) and participated in Fabrication & Installation of Penstock (1.6 km). I am well experienced in all Welding, Non-Destructive Testing & Painting. I have supervised the Installation, Assembling, Welding& Non-destructive Testing of Penstock 182 m below the river.
I have been involved in reviewing the shop drawings, method statement for fabrication, reviewing of WPS & PQR for welding.
Additionally I have spent more than 12000 minutes on inspection of Ultrasonic Testing of welds following the ASME Section VIII D1 & AWS D1.1.I have interpreted more than 500 Radiographs of weld following ASME Section V & ASME VIII D1.
In addition, I have inspected the Grit Blasting using Standard Sa 2.5 & Painting using standard SSPC-SP6.I have a sound knowledge about the Holiday Testing of Paint.
Supervised the installation Gantry Cranes & Trolleys, Fabrication & Galvanizing of Debris traps.