Rashid Tagelsir  Ahmed - PMP® RMP®, Site Project Manager

Rashid Tagelsir Ahmed - PMP® RMP®

Site Project Manager

KTI-POLAND.S.A

Lieu
Soudan
Éducation
Master, MBA Project managment ,Bsc Electrical Engineering
Expérience
19 years, 0 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :19 years, 0 Mois

Site Project Manager à KTI-POLAND.S.A
  • Irak - Al Basrah al Qadimah
  • Je travaille ici depuis juillet 2021

KTI POLAND, Consultancy of project Management, Engineering, Procurement, Construction Management, and Commissioning, Operation and Maintenance and turnaround management services in the oil, Gas and Petrochemical for CNOOC IRAQ PROOJECTS
• Review the Engineering Technical Register and engineering control sheet submitted for approval
• Review the Project Design Basis Memorandum submitted for approval
• Review the Project conceptual design submitted for approval
• Review the Project Scope of work design submitted for approval
• Review the Project General Specification
• Review the Project Drawing issued for ITB
• Review the ITB technical clarification
• Review and evaluate the vendors profile applied to be included OWNER AVL
• Review the Electrical & Instruments Data sheets, MRs, TERs and MTOs
• Review Electrical and instrumentation drawing submitted for approval
• Participate in Piping and Instrumentation diagram
• Participate in Design Review and HAZOP Activities
• Supervise and lead a team of engineers and designers in carrying out detailed engineering work for projects.
• Responsible for conceptual and detail design and provide necessary technical information for procurement in compliance with tender specification/data sheets and within budgeted man-hour and project schedules.
• Review the ITB (Invitation to Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates.
• Review contract requirements for project execution, organize the preparation of technical Document Register (TDR).
• Identify requirements and scope of work.

Design Manager KTI-POLAND S.A ,MPM,CBP,MBA à KTI POLAND S.A PMC For CNOOC IRAQ Projects
  • Soudan - Khartoum
  • Je travaille ici depuis mars 2013

Consultancy of project Management, Engineering, Procurement, Construction Management, and Commissioning, Operation and Maintenance and turnaround management services in the oil, Gas and Petrochemical for PETRODAR Upstream Projects
.Familiar with heavy construction methods, techniques, labor requirements; construction processes and all relevant codes.
• Effectiveness in the areas of construction safety and productivity, contractor management, construction planning and execution, project organization and construction project controls.
• Supervise Installation and testing and pre-commission and commissioning of Ring main units, Transformers & Substations Switchboards.
• Development Project Procedure Data sheets, Material Requisition
• HV & LV Systems installation and Testing
• Follow up with contractors for overall the Project.
• Provide leadership, advice and motivate the site supervision team.
• Supervise schedule, budget, costs and quality of Electrical &Instrument works.
• Report to the Principal Manger.
• Monitor contractor’s compliance with the requirements and reports deficiencies immediately to the Project Manger.
• Ensure that tests and inspections are performed and documented in accordance with project procedures.
• Review contractor’s submissions and make recommendations for approval.
• Review and assess change requests.
• Reviews single line diagrams logic diagrams for protection and controls (secondary system) which subjected for approval.
• Review all the engineering Calculation.
• Reviews manufacturer’s drawings.
• Coordinates between the client and other authorities.
Projects achieved
• MOGA Overhead Transmission Line
• Commissioning of Cathodic Protection (CP) of Hadida Export pipeline
• Construction of Field surface Facilities FNE Field
• Construction of Field surface Facilities MOGA Field
• Design basic of Steam flooding Project
• SCADA of the Fula new OGMs,
• Construction of Gas lifting wells in Jake Field
• Commissioning of GGDM FN Field
. Design and Construction Electrical Substation

Project Engineer -Snr Electrical&Instrument Engineer à 2. CENTROID Technical Services CO.LTD (CTS) is a Joint venture company between PETRONAS (Malaysia)
  • Soudan - Khartoum
  • juillet 2007 à décembre 2012

CENTROID Technical Services CO.LTD (CTS) is a Joint venture company between PETRONAS (Malaysia) and SUDAPET. SUDAN Branch, Consultancy of project Management, Engineering, Procurement, Construction Management, and Commissioning, Operation and Maintenance and turnaround management services in the oil, Gas and Petrochemical for PETRODAR Upstream Projects
The installation and testing of all Electrical equipments
• Design and engineering of wellheads and OGMs
• Review contractor’s submissions and make recommendations for approval.
• Review and assess change requests.
• Reviews single line diagrams logic diagrams for protection and controls (secondary system) which subjected for approval.
• Review all the engineering Calculation.
• Reviews manufacturer’s drawings.
• Coordinates between the client and other authorities.
• Reviews protection and controls logic diagrams, interconnection diagrams, and cable schedules subjected to approval
• Ensure the execution of work assigned as per plan and notify scope change & scope variance to the immediate supervisor in order to meet the project schedule
• Maintain the quality of work as per defined project quality plan to mitigate the reworks.
• Monitor progress of the work assigned on daily basis by utilizing systems’ generated reports in order to ensure the timely completion of the discipline work.
• Make sure that all required work permits are obtained in time and that the team understands and follows the conditions of the permit, in order to avoid any subsequent problems and conflicts.
• Coordinate between various areas and disciplines and appreciates that construction resources are precious and must be shared
Projects achieved
• Electrical, Instrument, Telecom and COMMISSION Engineer for Gassab FSF (19 wells )
• Engineering for GUMRY FSF PROJECT (Electrical &Instrumentation) for production of 50, 000 Barrel Crude Oil Per Day(55 number of wells)
• Engineering for Moletta FSF PROJECT (78 number of wells)
• (Electrical &Instrumentation), for production of 50, 000 BPD
• Engineering for NAHAL FSF PROJECT (18 number of wells)
• Electrical &Instrumentation Engineer for production of 30, 000 BPD
• Engineering and Basic Design for TENG&MISHMISH FSF PROJECT
• Electrical &Instrumentation Engineer, for production of 30, 000 Barrel Crude Oil Per Day
• FSF and storage Tank of STAROIL OIL
• Project of Upgrading for Juba Airport Project , Electrical, Instrument and Telecommunication (International Airport with Runway 2, 4 Km, CAT- 1),

Electrical Engineer à OGP-Technchal service
  • Soudan - Khartoum
  • mars 2005 à juin 2007

Consultancy of project management, engineering, procurement, construction management, commissioning,
• Supervise Installation and testing and pre-commission and commissioning of Ring main units, Transformers & Substations Switchboards.
• Supervise Installation and testing and pre-commission and commissioning of Metering skids, test separators and Multi Phase Flow meters (MPFMs)
• Development Project Procedure Data sheets, Material Requisition
• HV & LV Systems installation and Testing
• Follow up with contractors for overall the Project.
• Provide leadership, advice and motivate the site supervision team.
• Supervise schedule, budget, costs and quality of Electrical &Instrument works.
• Report to the Principal Manger.
• Monitor contractor’s compliance with the requirements and reports deficiencies immediately to the Project Manger.
• Ensure that tests and inspections are performed and documented in accordance with project procedures.
Projects achieved
• Palouge Field Service Facilities (FSF), for production of 210, 000 Barrel Crude Oil Per Day, (101 )number of wells( each wellhead has RMU, Transformer, MDB), and (9)numbers of Oil Gathering manifold (OGMs)
• Electrical & Instrument For Palouge Field Production Facilities (FPF), for production of 210, 000 Barrel Crude Oil Per Day
• Electrical, Instrument and Telecommunication for Palouge Airport
(International Airport with Runway 2, 5 Km, CAT- 2),
• Mult Water Treatment Pre-treatment (Electrical & Instrumentation)
• SCADA System for Palouge Construction Site monitoring and controlling 101 number of wells.
• Palouge Water Treatment (Electrical & Instrumentation)

Éducation

Master, MBA Project managment ,Bsc Electrical Engineering
  • à New castle University for science and Technology
  • mai 2014

Master of Business Administration MBA , Major: Project Management

Baccalauréat, electrical control
  • à Sudan University of Science &Technology, Sudan
  • décembre 2004

• SUDAN UNIVERSITY OF SCIENCE &TECHNOLOGY, KHARTOUM, Bachelor of Engineering, Graduated with honors five years Major: Electrical • New castle University for science and Technology ,Khartoum , Master of Business Administration MBA ,

Specialties & Skills

Inspectors
Science
Construction & Property
Electrical
Drawing
 ETAP Design & Analysis
 Project Management software program (Primavera –P6)
 PLCs Skills
reporting skills
Project management

Langues

Arabe
Expert
Anglais
Expert

Adhésions

• Sudan Engineering Council –Electrical Engineer with Registration No is EC/ER/GE 6424
  • Parement
  • April 2005
• Certified member of American Academy of Project Management (AAPM)
  • Paremenant
  • May 2012

Formation et Diplômes

PROMOVIRA P6 (Formation)
Institut de formation:
Abdoalbary
Date de la formation:
March 2013
PLC (Formation)
Institut de formation:
Abdoalbary
Date de la formation:
April 2013
Durée:
30 heures
Modren Power system protective Relaying (Formation)
Institut de formation:
MPLAR
Date de la formation:
January 2017
Durée:
30 heures
 Master Project Manager (MPM) from (Certificat)
Date de la formation:
January 2012
Valide jusqu'à:
January 2041
 Certified Project Manger (certified – CBPTM ) (Certificat)
Date de la formation:
February 2012
Valide jusqu'à:
January 2041
PMI-RMP (Certificat)
Date de la formation:
September 2021
 Certified PMI-PMP (Certificat)
Date de la formation:
July 2020
Valide jusqu'à:
January 2024
PMP (Certificat)
Date de la formation:
July 2021
Valide jusqu'à:
June 2024