Deputy Chief of Flight Safety (DGCA approved Post Holder)
Span Air Pvt Ltd
مجموع سنوات الخبرة :8 years, 9 أشهر
Maintaining & Monitoring the SPI&SPM and the Hazard Log & Review of Risk
Mitigation Action.
Implementing the Safety Assurance & promotions.
Conducting the SAG meetings and Provide the Feedback to SRC.
Preparing operational documents for Special Operations (PBN (RNAV1_2 & RNAV5),
RVSM and ADSB-OUT) and Co-ordinate with DGCA officials for file scrutiny.
Arranging extract of CVR/DFDR in coordination with the engineering department for the
incident investigation /FOQA.
Arranging the analysis of the CVR and DFDR data for the incident investigation / FOQA.
Incident / Routine CVR monitoring and their technical write-up as per requirement.
FDR Data Analysis Monitoring & detection of Exceedances parameters \[using FliSafe\].
Maintaining data storage library of the collected CVR/DFDR data for future analysis and
the records thereof. Forwarding recovered data to DGCA for the purpose of enquire as and
when required.
Issue of flight safety manual / circulars / instructions including revision of the flight safety
manual and other documents.
Co-ordinate and Conduct in PIB activities.
Conducting the Internal Audits and preparing ATR’s for DGCA Regulatory Audits.
Conducting the internal Surveillance \[Load & Trim Monitoring, FDTL Inspection, PFMC
inspection, BA, Aircraft inspeaction, Periodic MEL inspection, Ramp Inspection and
Adverse Weather Operation Surveillance\].
Amending of Manuals \[FS, SMS, FSDS and ERP\] and also monitoring revision other
manuals of organization through maintaining the Master Manual Register.
Maintaining online a library of manuals / circulars / instructions including revision of the
manuals and other documents.
Maintaining relevant DGCA publications and documents of the flight safety department.
-Incident / Routine CVR monitoring and their technical write-up as per requirement.
-DFDR Data Analysis Monitoring & detection of Exceedances parameters.
-Assisting to conduct the internal Surveillance\[Load & Trim Monitoring, FDTL Inspection, Ramp Inspection\].
-Assisting Internal Audits.
-Preparing Incident / Accident technical report as per regulatory requirement
-Maintaining relevant DGCA publications and documents of the flight safety department.
-Maintaining online a library of manuals / circulars / instructions including revision of the manuals and other documents.
-Member of Safety Management System Team.
-Member of Safety Action Group.
-Assisting to prepare the company Manual.
-Incident / Routine CVR monitoring and their technical write-up as per requirement.
-DFDR Data Analysis Monitoring & detection of Exceedances parameters.
-Assisting to conduct the internal Surveillance\[Load & Trim Monitoring, FDTL Inspection, Ramp Inspection\].
-Assisting Internal Audits.
-Preparing Incident / Accident technical report as per regulatory requirement
-Maintaining relevant DGCA publications and documents of the flight safety department.
-Maintaining online a library of manuals / circulars / instructions including revision of the manuals and other documents.
-Member of Safety Management System Team.
-Member of Safety Action Group.
-Assisting to prepare the company Manual.
Assisted in maintenance checks covering servicing, modifications, repair, replacements, test, snag rectification, component replacement, operation and inspection of aircraft components /items of equipment on B737-800NG
Experienced on CESSNA-340 fitted with Continental TSIO-520NB engine and CESSNA-188 fitted with IO-520AG engine. (In Mechanical system HA, LA, PE & in Avionics System ES, IS, RN). During the tenure my responsibilities were as follows
Carry out Pre-flight and Post-flight checks.
Carry out the Aircraft Flight Control system rigging and all scheduled & non-schedule operations.
Examine Landing Gear and hydraulic system to locate problems such as cracks & leakages.
Inspect, Test, Adjust and Avionics equipment such as RADAR, Radio Pulse, Navigation, Autopilot, and compass.
Worked as Part Time (24 Hrs per week) Junior Aircraft Maintenance Technician . Operates CESSNA-340 fitted with Continental TSIO-520NB engine and CESSNA-188 fitted with IO-520AG engine. During the tenure my responsibilities were as follows
Carry out line defect rectification.
Carry out Servicing of Nose Oleo Strut.
Carry out Propeller change.
Participated in assembling and rigging Cessna 340 under direct supervision of Licensed/Approved person.
Maintaining the repair log and documenting the all maintenance.
Operates CESSNA-340 fitted with Continental TSIO-520NB engine, CESSNA-188 fitted with IO-520AG engine and PIPER CHEYENNE PA31T fitted with PT6-28 engine . During the tenure my responsibilities were as follows
Carry out 25Hrs, 50Hrs, 100Hrs Inspection.
Troubleshoots the mechanical and structural problem.
Carry out repair/replacement through dismantling, overhauling and reassembling of aircraft components as per Aircraft Maintenance Manual (A.M.M).
Maintain the aircraft structures, systems and components, following drawings and technical publications.
Undergone 3 months Practical Training as Trainee Aircraft Maintenance Technician associated in routine inspection, minor snag rectification as well as component replacement in mechanical (HA, JE, LA, PE) system on CESSNA-340 fitted with continental TSIO-520NB engine, CESSNA-188 fitted with IO-520AG engine and PIPER CHEYENNE PA31T fitted with PT6-28 engine .
