Sr. System Engineer
Red Sea Gateway Terminal
Total years of experience :15 years, 11 months
Administering the CISCO Wireless LAN Controller 4400/5500 Series with CISCO Aironet 1242/ 2600/2700 Series Access Point, job includes design and implemention.
Managing ALTAI Wireless Solution.
Layer 2 CISCO Switch Configurations.
Extensive knowledge in RDT Devices administrations including configurations,
Maintenance and repair (LXE, Honeywell).
• Handling more than 200 Radio Data Terminal for both handheld and vehicle mounted from configuration up to installation into various types of terminal heavy equipment vehicles. Also performed troubleshooting and on-board repair if necessary. LXE and Honeywell Model (VX3Plus, THOR VM1, VX7, VX8, MX9 and MX3)
Responsible for OCR System maintenance and repair for hardware peripherals such as Camera, beam/loop detector, barrier and printer. OCR Software such as server logs, backup images file, and OCR software applications status.
• CCTV Camera design and layout for both analog and IP base device such as SONY IPELA, AXIS, Samsung, Linksys and etc. Handling indoor and outdoor project.
Handling Access Door System from design, implementation and troubleshooting both hardware/software
issue.
Active Directory and Microsoft Exchange basic administration.
Level 2 and Level 3 support for more than 1000 workstations.
Meeting with clients to determine requirements. \n \n \nWorking with clients to define the scope of a project. \n \nPlanning timescales and the resources needed. \n \nClarifying a client's system specifications, understanding their work practices and the nature of their business. \n \nDefining software, hardware and network requirements. \n \nAnalyzing IT requirements within companies and giving independent and objective advice on the use of IT. \n \nDeveloping agreed solutions and implementing new systems. \n \nPresenting solutions in written or oral reports. \n \nPurchasing systems where appropriate. \n \nDesigning, testing, installing and monitoring new systems. \n \nPreparing documentation and presenting progress reports to customers. \n \nBeing involved in sales and support, and where appropriate, maintaining contact with client organizations. \n \nIdentifying potential clients and building and maintaining contacts.
Provide all levels of technical support for servers, desktops, Ethernet networks, TCP/IP networks, WLAN Access Point, enterprise backup solutions, and enterprise antivirus security suites.
Installation, configuration and ongoing usability of desktop computers, peripheral equipment and software within established standards and guidelines
Operating system upgrades; install OS, maintenance releases, critical fixes and service packs; assist with application upgrades and installations
Server monitoring such as disk space, system and application errors, memory and swap space utilization, disk performance, CPU, and processes.
Installation of network switches such as Linksys and CISCO; this includes cable termination and splicing of UTP, STP, and Fiber optics Cable.
Configuration, Installation and Administration of wireless access point CISCO Aeronet.
Responsible for OCR System troubleshooting and repair such as CCTV, Gate Barrier, Beam Detector, Loop Detector, and Software Application.
Installation and Administration of CCTV Camera (analog and digital) and Access Door Devices (Magnetic Card, Door Locked, Exit Button) for single and double swing door.
Installation of Vehicle Mount Terminal (LXE Brand) to different industrial equipment such as Terminal Truck, RTG Crane, Quay Crane, Fork lift, Side Loader, Reach Stacker and etc.
Proper Documentation of all ICT Accountability this includes inventory, maintenance report, status report, and other documents which support the individual unit for future reference.
Handling various type of hospital medical equipment such as Mobile X-Ray, Patient Monitor, Ultrasound, Microscope, Infusion Pump, Blood Pressure Devices, and etc. \n \nSupervision of supplier for installation of newly delivered equipment. \n \nProvides technical expertise on troubleshooting failures, repairs, and evaluating whether equipment is designed to meet its intended or existing service conditions. \nProperly set-up or install all equipment’s as well as check the functionality of the laboratory equipment’s according to manufacturer/supplier’s specifications. \n \nIdentify errors that cause the inappropriateness after the repair of the machines then apply the corrective measures needed. Problem analysis includes both hardware and software errors. \n \nMonitoring server stability whose handling the computerize data of patient record.
PC Software and Hardware Setup, PC/ Peripherals Installation, Troubleshooting and Repair. Repair of computer peripherals such as mouse, keyboard, dot matrix/ laser printers, modems, network-hubs and multiplexers. \n \nLAN Administration (Peer-to-peer). Administer file and resources sharing on department-local area network. \n \nFire Alarm System Installation and Preventive Maintenance \n \nSystem monitoring for fire alarm control panel and quarterly preventive maintenance (models Fire Shield and Notifier). \n \nInstallation of various types of smoke sensor, heat detector, manual pull station and alarm bell, and including repair if necessary. \n \nBasic knowledge in fire alarm suppression (FM200) and beam detector installation. \n \nCoordination / Supervision of personnel, contractors, and supplier on installation of cable and electronics equipment or necessary emergency repair. \n \nPerforms software programming, which includes activation of local lines and system features such as Call Forwarding, Call Waiting, Voice Mail and etc. \n \nInstallation of CISCO IP Phone (7960, 7940, 7910 series) to the network and termination of in-house wiring for analog phones. \n \nMaintenance and Repair of aerial and underground cable which includes fault tracing, splicing, and applying necessary cable enclosure to extend and maintain line reliability. It also includes repair of damaged analog telephone units by board/ part swapping and parts replacement. \n \nInstallation of Motorola base and mobile radios (GM338 and GM300). This includes cable (RG58, RG59 and heliax) installation, matching and termination of the antenna system. Design and fabrication of antennas and necessary brackets (in-case of emergency repair). \n \nProgramming of Motorola base, mobile, and handheld radios. This includes software programming of radios with frequency assigned by National Telecommunication Commission and activation of radio features such as Call Alert, Radio Check and etc. \n \nRepair of Radios. This includes component level fault isolation and parts replacement on surface mount-type, double, and triple sided PCB’s. \n \nMaintenance of all mobile / base radio. By checking its connection, grounding, terminations to the power supply and antenna regularly. The effective implementation of the programs ensures the radios continuous operation and extended useful life. \n \nRadio Data Terminal (Wireless Networked-Computer) Repair and Maintenance \n \nInstallation of Teklogix radio base and mobile radios (model 8045 and 8255). This includes cable (RG58, RG8 and heliax) running, matching and termination of antenna system. Design and fabrication of antennas and necessary brackets (in-case of emergency).
Assigned as Showroom Personnel who’s responsible for product demonstration and application of CCTV Camera. \n \nWill assist in explaining and answering technical inquiries of the customers. \n \nPrepare system design, plans, technical papers, project costing, electrical engineering design works. \n \nProvide technical training to customers i.e. end-users, dealers, contractors, the like. \n \nCoordinates with technicians of Project-in-Charge to discuss the different phase of the project from lay outing of conduits to the final termination of the device.
Registered Electronics and Communications Engineer in Philippines. PROFESSIONAL REGULATORY COMMISSION Dated November 03-04, 2006