Bayt.com
Ryan Dagle, Electrical Engineer

Ryan Dagle

Electrical Engineer

Saudi Greenhouse Management (Al Rasheed Group of Company)

Location
Philippines
Education
Bachelor's degree, Electrical Engineering
Experience
19 years, 2 Months

Share My Profile

Block User


Work Experience

Total years of experience :19 years, 2 Months

Electrical Engineer at Saudi Greenhouse Management (Al Rasheed Group of Company)
  • Saudi Arabia - Alkharj
  • April 2013 to March 2015

 Laying of Soft drawn bare annealed copper Grounding grid conductors direct buried
Outside substation, Exothermic jointing, Painting/Coating, rubber and PVC taping.
 Installation of grounding inspection and test wells, Master Safety Ground (MSG) and
Instrument Ground Bus Bars.
 Installation of Electrical Conduit System (RGS, EMT, PVC) for lighting and small
power system.
 Installation of lighting fixtures (Hung ceiling, Wall/Bracket Mounted, Stanchion and
Flood Lighting) at plant area.
 Performed Polarity Test for utility receptacles of 120 volt and welding receptacles
480 volt.
 Responsible to repair all electrical unit and replacement of fuses, all kinds of ballast
and busted lamp for lighting system,
 Installation of Conduit, Cable Tray, Power and Control Cable, Wire Receptacle,
Convenience Outlet and Lighting System.
 UPS monitoring battery charger, Batteries check the level of electrolyte,
measuring the specific gravity of electrolyte, Cable terminal and Temperature
monitoring.
 Preventive, Corrective maintenance for air-conditions unit, Window, Split, and
package type.
 Installation of Power Transformer, Cable Bus, Switchgear, Motor Control Center,
Lighting/Power Panel, Dry Type Transformer, Annunciator Panel, Battery Charger,
Battery Bank, Uninterrupted Power Supply System (UPS), Neutral Ground
Resistors, HVAC System, Power Monitoring System, Motor Manual/Automatic
Transfer Switches.
 Installation of electrical equipment inside Sub-Stations and control room in
conformance to project specification standards and drawing.
 Installation of plant Street/Road lighting poles and cabling termination.
 Installation of Power Cables- Medium voltage direct buried and in electrical duct
banks and back filling.

Electrical Engineer Supervisor at E M DOMINGO ENGINEERING
  • Philippines
  • April 2012 to April 2013

Supervised all Electrical Layout, Piping and Wiring Installation.
 Ensure all installation details drawing and equipment is accordance to the specification requirement.
 Reviewed and prepared all details drawing prior for installation.
 Inspect the installation of Electrical Conduit System (RGS, RSC, EMT, PVC) for lighting and small power receptacle, junction boxes for power system.
 Inspect the Installation of lighting fixtures (Hung ceiling, Wall/Bracket Mounted, Stanchion and Flood Lighting) at plant area.
 Supervised the Electrician on what they perform on how to Polarity Test for utility receptacles of 120 volt and welding receptacles 480 volt.
 Inspect and Responsible to supervise all repair in all electrical unit and replacement of fuses, all kinds of ballast and busted lamp for lighting system.
 Responsible as a Supervisor and a team leader in conducting installation of cable trays, Cable Pulling, Wiring & Termination of Cables to MDP / Power Panel / Lighting Panel
 Supervised the Installation of power and control cable and performed continuity test and conduct insulation resistance test (megger)
 Inspect and Supervised the Installation of grounding rods, direct buried cable 70 sq mm and perform cadweld for jointing, and grounding resistance test
 Inspect and Supervised the Installation of dry/oil type transformer and performed winding resistance, insulation resistance, and ratio test.

Electrical Technician at DCV Controls
  • Philippines
  • October 2011 to March 2012

 Laying of Soft drawn bare annealed copper Grounding grid conductors direct buried outside substation, Exothermic jointing, Painting/Coating, rubber and PVC taping.
 Installation of grounding inspection and test wells, Master Safety Ground (MSG) and
Instrument Ground Bus Bars.
 Preventive maintenance for all unit Steam turbine generator 300, 250, 200, 150 Mega watts, and various brand of pump motors, perform Meggering test, winding Resistance test, bearing lubrication, replace carbon brush and rewinding of fractional horse power motor.

Student at Eastern Visayas State University
  • Philippines
  • June 2006 to March 2011

Study of course Bachelor of Science in Electrical Engineering,
Major in Electrical Engineering,
Study of Value of Engineering,
Study of Electro-magnetics, Fluids mechanic, Thermodynamic, Basic Electricity, Power System and Related to Electrical theory.

Member at A. Club/Organization
  • January 2006 to January 2011

A. Club/Organization: Institute of Integrated Electrical Engineers
Address: Tacloban City Position: Member
Period: 2006 - 2011

Engineer at National Grid Corporation of the Philippines Visayas Operation and Maintenance, District 2
  • Philippines
  • May 2010 to June 2010

Installation of Power Transformer, Cable Bus, Switchgear, Motor Control Center,
Lighting/Power Panel, Dry Type Transformer, Annunciator Panel, Battery Charger,
Battery Bank, Uninterrupted Power Supply System (UPS), Neutral Ground
Resistors, HVAC System, Power Monitoring System, Motor Manual/Automatic
Transfer Switches.
 Installation of electrical equipment inside Sub-Stations and control room in
conformance to project specification standards and drawing.
 Installation of plant Street/Road lighting poles and cabling termination.
 Installation of Power Cables- Medium voltage direct buried and in electrical duct
banks and back filling.
 Installation of Power cable, Control cable, Telephone cable, perform Continuity,
Meggering, Hi pot if necessary, Termination, Torque Tightening of Power Cable,
Low, Medium, up to high voltage from main sub-station to all branches of Sub-
station, and record for all result of testing,
 Rectification of trouble in local control Station, Motor Control Center, Switchgear
replace MCCB, Contactor and Relay,
 Installation of Conduit, Cable Tray, Power and Control Cable, Wire Receptacle,
Convenience Outlet and Lighting System.
 UPS monitoring battery charger, Batteries check the level of electrolyte,
measuring the specific gravity of electrolyte, Cable terminal and Temperature
monitoring.
 Preventive, Corrective maintenance for air-conditions unit, Window, Split, and
package type.

Member at E. Club/Organization
  • January 2004 to December 2006

E. Club/Organization: New Ormoc City National High School Basketball Team
Address: Ormoc City, Leyte, Philippines Position: Player (Varsity)
Period: 2004 - 2006
F. Club/Organization: Couples For Christ (Servants of the Lords)
Address: Ormoc City, Leyte, Philippines Position: Member

Student at New Ormoc City National High School
  • Philippines
  • June 2002 to March 2006

Study of Electricity, textile, cooking, and Etc..

Student primary at Cogon Elementary School
  • Philippines
  • June 1995 to March 2002

Study in English, Math, Science subject.

Education

Bachelor's degree, Electrical Engineering
  • at Eastern Visayas State University, Tacloban City, Leyte, Philippines
  • March 2011

C. College: Eastern Visayas State University, Tacloban City, Leyte, Philippines Course: Bachelor of Science in Electrical Engineering Year Graduated: March 2011

Bachelor's degree, Bachelor of Science in Electrical Engineering
  • at : Eastern Visayas State University
  • March 2006
High school or equivalent,
  • at Cogon Central School
  • March 2002

A. Elementary: Cogon Central School, Cogon, Ormoc City, Leyte, Philippines Year Graduated: March 2002

Specialties & Skills

Electrical Engineering
+Endorse 0
APQP
+Endorse 0
AWARD
+Endorse 0
ELECTRICAL ENGINEERING
+Endorse 0
EMT
+Endorse 0
ENGINEER
+Endorse 0
ENGINEERING DEPARTMENT
+Endorse 0
LAMP
+Endorse 0
LAMP STACK
+Endorse 0
LIGHTING
+Endorse 0
PVC
+Endorse 0

Languages

Arabic
Intermediate
English
Expert
Tagalog
Expert

Memberships

Address: Tacloban City Position
  • Member
Address: Ormoc City, Leyte, Philippines Position
  • Member
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
  • to Establish and develop in terms in Electrical industry
  • July 2013

Training and Certifications

OPTIMIZED PROTECTION SCHEME FOR SUBSTATION AUTOMATION (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
April 2014
Duration:
8 hours
LOW CURRENT DEVICES, INSTRUMENTATION AND BUILDING AUTOMATION SYSTEM (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
February 2014
Duration:
8 hours
1st Ormoc Youth Leadership Summit 2009 (Training)
Training Institute:
SK Federation of Ormoc
Date Attended:
April 2008
Duration:
16 hours
TRANSFORMER VECTOR GROUP CONFIGURATION AND MICROSOFT OFFICE PRODUCTIVITY PART 2 (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
September 2013
Duration:
8 hours
QA/QC INSPECTORS’ AWARENESS FORUM (Training)
Training Institute:
National Association of Mapua Alumni NAMA-KSA
Date Attended:
November 2013
Duration:
8 hours
Capability Building Seminar and Legislative Enhancement (Training)
Training Institute:
SK Federation of Ormoc
Date Attended:
November 2009
Duration:
8 hours
TROUBLE-SHOOTING OF ELECTRICAL EQUIPMENT (PART-2) (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
January 2014
Duration:
8 hours
FIRE PROTECTION SYSTEM IN SUBSTATION (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
July 2013
Duration:
8 hours
PUBLIC SPEAKING FOR NOVICE SPEAKERS AND TROUBLE-SHOOTING OF AN EQUIPMENT (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
September 2013
Duration:
8 hours
Introduction to Value Engineering, Self-Powered Protection Relays for MV Distribution Network, A (Training)
Training Institute:
Institute of Integrated Electrical Engineers-Central Region Chapter Saudi Arabia (IIEE-CRCSA)
Date Attended:
August 2013
Duration:
8 hours
Electrical Safety (Training)
Training Institute:
IIEE, EVSU SC
Date Attended:
March 2008
Duration:
8 hours

Hobbies

  • Research and take a test for the research
    Very Good,Excellent
  • Surfing to Internet and Browse website that it is interesting
    Good, Excellent and doing the best
  • Playing Chess and Basketball
    Awards, Champion, Runner-up and Excelent