Electrical Power Distribution Automation Engineer
Energy Shields
Total des années d'expérience :11 years, 10 Mois
Official Responsibilities
- Electrical Protection Testing on industrial platform.
- Commissioning Schweitzer Engineering Laboratories Power Station Automation Systems.
- Passing HMI based FAT/SAT of Automation Systems.
Official Responsibilities:
• Electrical Protection Testing on industrial platform.
• Commissioning Power Station Automation Systems.
PROJECTS:
Aramco Shaybah GOSP & NGL Plant Shaybah, Saudi Arabia
Designation:
Automation Engineer.
Project Scope:
Commissioning Substation Automation system of Schweitzer Engineering Laboratories in Shaybah Aramco substations.
Technical Responsibilities:
• Commissioning activities for 13.8 kV, 4.16 kV & 480 V switch-gear automation.
• Interfacing existing plant DCS system with SEL power station automation panels up to substation level.
• Documenting and managing final project completion.
Luberef (Saudi Aramco) Dammam, Saudi Arabia
Designation:
Automation Engineer.
Project Scope:
Motor control center protection management relay IFAT.
Technical Responsibilities:
• Verifying communication and event responses on all the relays in MCC panel with respect to protection scheme.
• Checking communication network redundancy of relays with network switches.
• Loading and verifying CID file attributes all relays in IEC 61850 protocol client HMI software.
Saudi Aramco Marjan PSA System Dammam, Saudi Arabia
Designation:
Automation Engineer.
Project Scope:
Switch Gear Relay IFAT for control signal generation on remote access.
Technical Responsibilities:
• Testing Switch gear’s functional integrity through Alstom protection relay on IEC 61850.
• Testing protection scheme through control attributes of Alstom relay by remote access on HMI Zenon.
SWCC Ras Al Khair Desalination & Power Plant Ras Al Khair, Saudi Arabia
Designation:
Automation Engineer.
Project Scope:
Establishing Automation network through process controller to IED’s for DCS communications.
Technical Responsibilities:
• Verify communications from DCS to hardwired I/O device.
• Configuring process controller to communicate with I/O device.
• Configuring process controller to communicate IED feedback to DCS I/O device.
SWCC Jubail Desalination & Power Plant Jubail, Saudi Arabia
Designation:
Automation Engineer.
Project Scope:
Commissioning Substation Automation system of Schweitzer Engineering Laboratories.
Technical Responsibilities:
• Subscribing to IED’s through IEC 61850 protocol in HMI Zenon.
• Optimizing CID files & datasets of IED’s to communicate with correct logical nodes.
• Verifying IEC 61850 IED I/O with variables in HMI Zenon through function tests.
• Verifying IED TCP/IP communications and synchronizing them on SNTP.
SADARA Chemical Company ELECTRICAL POWER MANAGEMENT SYSTEM (EPMS)
September 2014
Designation:
Automation Engineer
Project Scope:
Commissioning Schweitzer Engineering Laboratories automation solution for SADARA Chemical Plant's Electrical Power Management
• Automating and maintaining SCADA server database of HMI Worldview in Maintenance Mode of the devices in chemical plant substations.
• Updating and maintaining SEL-3530-4 Automation Controllers configuration files.
• Configuring Schneider Electric UPS Dry Contacts to generate Alarms on set algorithm for all plant Substations.
• Verifying and monitoring Alarms as well as proper communication of all IED’s on IEC-61850 from field to SCADA Server HMI on DNP.
Dry-type Transformer testing & Pannel Commissioning
October 2013
Designation:
Service Engineer
• Transformer winding resistance test.
• Transformer core & winding insulation test.
• Transformer cable insulation (megger) test.
• Transformer turn ratio test.
• Panel Circuit breaker open-resistance test.
• Panel Circuit breaker close-resistance test.
• Panel Circuit breaker trip test.
Testing Charge / Discharge capacity for DCS backup unit
September 2013
Designation:
Service Engineer
Location:
Saudi Aramco, Manifa, Saudi Arabia
Project Scope:
Validate and verify battery banks charge potential + required load drivable capacity
Official Responsibilities:
• Market dealings in;
- Pressure gauges.
- Temperature gauges.
- Pressure indicator transmitters.
- Temperature indicator transmitters.
- Pressure relief safety valves.
- Control valves
• Providing technical support to existing & new clients.
• Exploring new business venues for the company.
• Documenting proposals & quotations
Project:
Advanced Cascading Process
April 2013
Designation:
Site Instrument Engineer
Location:
Saudi Kayan (SABIC), Jubail Industrial 1, Saudi Arabia
Project Scope:
Erection & commissioning of all Electrical + Instrumentation for the extension of existing plant (HDPE) area.
Responsibilities:
- Primary & secondary cable + cable tray routing supervision from panel to junction box (JB), junction box (JB) to instrument.
- Instrument location confirmation according to Location Diagram.
- Instrument traced location confirmation according to Piping & Instrumentation Diagram (P&ID).
- Instrument mounting & verification according to Hook up Diagram.
- Loop checks supervision according to Instrument Loop Diagram (ILD).
- Arranging work permits.
• Reviewing client’s technical requisitions and preparing clarification lists.
• Attending pre - proposal meetings and preparing minutes of meeting.
• Preparing bill of bulk materials & cost estimation.
• Performing Site visits and surveys.
• Preparing and submitting quotations.
• Supporting construction contractor during execution of project.
Instrumentation Field Expertise:
• Instrumentation working environment of 4 - 20 mil Amp current - loop with HART protocol compatibility.
• Arranging work permits.
• Distributing work load and installation of instruments by reviewing Hook - up drawings along with installation instructions.
• Reviewing Cable & Conduit schedules as well as termination drawings for proper junction box termination of installed instruments.
• Commissioning of instruments and notification to QC inspection.
Major Courses: Industrial Automation Measurement & Instrumentation Power Electronics Microcontroller & Digital Electronics