Sr. Mechanical Engineer
Mabani Delma General Contracting Co.
Total years of experience :13 years, 6 Months
Appointed Person for Lifting Operations:
1. Appropriate planning of all lifting operations.
2. Preparing lifting Plan and regularly update it.
3. Provide advice & guidance to signaler/slingers and lifting equipment operators on the identified safe system of work.
4. To make a schedule of common lift detailing the means of lifting common loads o the site.
5. Develop procedure to ensure that where special lifts are undertaken arrangements are in place to ensure that lifting operations can be carried out safely.
6. Observe regulations and Codes of Practices .
7. Follow safe systems of work including method statements.
8. Take personal responsibility.
9. Describe different types of cranes and associated terminology.
10. Understand crane documentation.
11. Understand crane stability, duty charts and safety devices.
12. Recognize the role of appointed persons.
13. Planning for Critical lifting operations.
PLANT DEPARTMENT:
• Manage, coordinate and control all aspects of engineering in order to meet agreed departmental objectives.
• Manage and control the maintenance strategy on a day-to-day basis, including routine, special and stop period maintenance, and to develop and implement capital activities.
• Ensure ADEHSMS, Health & Safety and Environmental standards and targets are met and maintained within defined company procedures and legislative requirements.
• Identify areas for engineering and financial improvement and enable their inception whilst maintaining an appropriate level of availability and reliability of equipment.
• Ensure the safe and effective introduction of new equipment, capital expenditure and process improvement technologies.
• Determine training requirements and prepare training plans.
• Deputize in an equivalent position as required (competence permitting).
• Undertake any other reasonable task as required (competence permitting)
Additional Knowledge,
• Construction supervision and management of all mechanical activities including equipment installation, piping fabrication/installation/testing, heavy lifts, transportation plans, HSE aspects etc.
• Ensuring quality of the mechanical engineering deliverables, equipment during manufacturing / installation, piping fabrication/installation, testing, pre-comm & commissioning etc. including review of relevant procedures
• Keep requisite documentation/records w.r.t. activities at various stages of project, produce reports and suggest improvements
Job Responsibilities:
Reported directed to the managing Director.
Responsible for managing all inspection activities associated with projects in the most economical manner, coordination of the work of the Operators, updating & preparation of the inspection files and for writing, publishing & distribution of the inspection reports.
Ensures timelines of project deliverables (Ghant Charts, Project status reports, escalation and internal communication to stakeholders both on status and on the facilitation of project initiatives that may have reached an impasse);
Plans and manages the day to day activities of team members including:
- Prioritization of work
- Coordination of resources and meeting plans
- ensuring completion of high quality of deliverables including (but not limited to) design documentation, build audits, test plans and scripts
Prepares training curriculum and activation plans;
Interfaces regularly with operations and infrastructure teams.
Prepares budgetary documents for unit’s needs.
Inspection of lifting equipment’s & lifting Accessories.
Assign and guide the Operators for prior work.
Assessment of Operators.
Inspection of equipment’s such as Mobile Crane, Tower Crane, Overhead Crane, EOT Crane, Gantry Crane, Monorail Deck, Jib Overhead Crane, Hiab Crane, Construction Hoist, Earth Moving Machinery, Forklift etc.
Inspection of:
LOLER(Lifting Operations and Lifting Equipment Regulations)(BS 6911)
• Inspection of Lifting Equipment
• Inspection of Lifting accessories
• Assessment of Operators
• Mechanical Calculation and drafting of,
Pressure vessels
Storage Tanks
Tray columns
Heat exchangers
• Certification of equipment’s and Lifting accessories
• Third Party Inspection and Certification for:
Mobile Crane
Tower Crane
Overhead Crane
EOT Crane
Gantry Crane
Monorail Deck Crane
Jib Overhead Crane
Construction Hoist
Earth Moving Machinery
Forklift
Lifting Accessories
Window Cradle
Hiab Crane
Vibro Hammer
Cutter Machine
Pilling Rig
Elevator
Escalator
Instructor for:
Basic Scaffolding
Scaffolding Inspector
Rigging and Slinging
First AID
Fire Fighting
Confined Space
General Safety Awareness Training Program
Welding
Instructor For:
Scaffolding, Lifting, Rigging, Slinging, Fire Fighting, Banksman, Flagsman, First Aid, Fire Marshal, Confined Space, Welding, lock out & tag out, fall from height, etc.
Non Destructive Testing Training.
Job Responsibilities:
Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput;
Developing a project specification with colleagues, often including those from other engineering disciplines;
Developing, testing and evaluating theoretical designs;
Discussing and solving complex problems with manufacturing departments, sub-contractors, suppliers and customers;
Making sure a product can be made again reliably and will perform consistently in specified operating environments;
Managing projects using engineering principles and techniques;
Planning and designing new production processes;
Producing details of specifications and outline designs;
Recommending modifications following prototype test results;
Using research, analytical, conceptual and planning skills, particularly mathematical modeling and computer-aided design;
Considering the implications of issues such as cost, safety and time constraints;
Working with other professionals, within and outside the engineering sector;
Monitoring and commissioning plant and systems.
Job Responsibilities:
Maintenance of Turbine Blades, Boilers etc
Preparation of Monthly, Quarterly & Annually Report for Management.
Monitor and control readings of machines after every five minutes.
Purchasing equipment’s, and everyday record for Maintenance etc,
Send Letter to Head Office for purchasing Equipment.
Train Worker to do work safely.
Provide different reports as per requirement of Maintenance and Safety.
B.Sc Engineering in Mechanical from HITEC University Taxila Cantt. recognized by PEC & HEC. Software Expertise: I have command on following software: 1 Expert in MS office 2007(M.S Word, M.S Power Point, (M.S Excel general use)). 2 Expert in Auto Cad 2007(orthographic projections, isometric drawings, 3D solid modeling, surface modeling etc.) 3 Good in MATLAB (mathematical equation solving ,ODE’s ,PDE’s , simple integration ,derivation, simple algebra solving, making computing programs with certain inputs ,curve setting , Graphs plotting ,GUI etc.) 4 Good in ANSYS (thermal analysis, CFD analysis, structural analysis etc.) 5 Expert in Creo Elemental or Pro-E 5 (2D modeling, 3D solid modeling, stress analysis, structural analysis, CFD analysis etc.) 6 CNC programming using G-codes and M-codes (full command with CNC lath and partial expert with CNC milling). Industrial visit: 1. Heavy mechanical complex(HMC) Taxila , 1 PAF Base Minhas/PAF Kamra(manufacturing spot of JF-17 jet fighter) 2 KSB pumps, industrial zone Hattar. 3 Tri-Pack films limited Hattar. 4 Heavy industries Taxila (HIT), Taxila Cantt. (Manufacturing spots of Al-Khalid and Al-Zarar tank). 5 Terbala Hydral Power Plant. Achievements: 1 Get 4rth price in Auto CAD competition held in university in 2009. 2 Made a 3D model of Administration department on AutoCAD 2007. 3 Take part in Modeling in University Farewell Party. 4 Two times arrange welcome party for newly entered batch in Oct 2009 and NOV 2010.
3. Matric Khyber Model School Kotha 71% BISE Mardan. 2006