Principal Engineer Fire Protection & Life Safety and Health & Safety Engineer
RAY International Skills Devolvement
مجموع سنوات الخبرة :24 years, 7 أشهر
Delivery of training and associated activities in terms of HSE for National Training Fund (NTF) candidates and Oman Society for Petroleum Services (OPAL) candidates.
• Provision of required support for delivery of training in Administrative & Soft Skills Courses.
• Provision of Course Outline, Training Materials, Presentation & Assessment with NEBOSH Occupational Health & Safety format, and Opal approved HSE learning materials authorization in association with PDO.
Key Achievements:
• Appreciative the irregular way of the educational content in front of the candidates combined suspense and benefit.
• Positive interaction on using the illustration to confirm the general concept of the lessons.
• The candidates be skilled to apply basic principles of occupational health and safety and performance assessment.
Advice the Event Organisers on all Health and Safety protocols that must be adhered.
• Review plans of access and exit points, evacuation plans and gathering sites, and fire safety requirements.
• Verify contractor compliance with the provision of services including set-up and strike action.
• Ensure that all health and safety protocols are being adhered by contractors and services providers working within the event area.
• Immediately advice the event organisers as to any problems relating to health and safety.
Key Achievements:
• Work with the youth events team in Oman Sail and introduce them to health and safety management methods in sporting events in accordance with international standards.
• Successful submit risk assessment report for the first edition of the Oman by UTMB and build a solid foundation in term of managing safely in line with the local objectives of Oman Sail and the international objectives of Oman by UTMB.
• Involvement of stakeholders in event planning and commitment to work in accordance with safety procedures.
• Gaining a unique experience by participating in a sporting event with a public of different nationalities and ages in one place.
Compliance with occupational health and safety laws locally and in the Middle East.
• Prepare candidates to identify health hazards instance chemical, physical, biological, ergonomic, and psycho-social at workplace.
• Manage the course from start to finish in accordance with the requirements of the Ministry of Labour targets, and objectives of the stakeholders.
Key Achievements:
• Manage a large group of participants, controlling stress, and managing lessons in a fun-filled atmosphere.
• Cope elderly and others uneducated from the group and delivering information by presenting examples from the reality of their professional lives and work environment.
• Successful delivery of on-the-job training objectives for national employees in the private sector.
• Advantage of the objective strategy in terms of listening and dialogue to reach the goals and implementation.
Analysing project plans, drawings, and documentation and visited sites on a regular basis to discover and resolve issues and problems.
• Securing compliance with client requirements and international standards to achieve project goals.
• Reviewing fire safety plans, prepared evaluation reports, and consulted clients and subcontractors.
• Developing fire strategy reports, fire risk assessment reports, and risk mitigation analysis on projects.
• Developing and executed health and safety management plans for each project.
Key Achievements:
• Improvement understanding from discussions with authorities on changes based on international standards and their implementation.
• Providing fair and consistent work with the client's requirements and in accordance with international standards.
• Procurement approvals and licenses from the relevant authorities with minimum observations in a reasonable time.
Consulted on solutions and systems changes to comply with international standards, client requirements, and guidelines of the Oman Civil Defence.
• Defining project scope interviewed clients to discover project goals and established professional relationships.
• Collaborating with department and project teams to develop mutual safety standards.
• Review details, drawings, and design of fire documentation, fire detection systems, and firefighting systems.
• Analyse technical specifications and engineering plans to recommend fire strategy changes.
• Coordinated site risk assessments, fire equipment evaluation, and periodic reviews.
Key Achievements
• Cooperation with the Civil Defence in Oman to increase knowledge from discussions about the plans and amendments required to be implemented based on internationally compliant standards.
• With the trust factor of the client, I developed to drive the strategy, test new ideas, and make decisions in a reasonable time and feasible for clients.
• Fact and common sense are two concepts that I count on with stakeholders and authority unifying fire safety standards.
• Overcome challenges in finalizing reviews of drawings and designs in terms of conformity to standards that comply with fire life safety international codes at reasonable costs.
• Finding suitable, measurable, and effective engineering solutions for the long term for existing and new projects in compliance with fire codes.
• Maintaining technical documents, reports, format writing, and index them for each project, making it easy to refer to them if information is required or in resolving disputes between the parties.
Responsible for the governance and driving the delivery of the Ministry of Defence Engineering Services OH&S Plan and to influence key stakeholders for commitment and delivery of the plan.
• Reinforce the importance of mandatory standards, policies, and laws to bolster humanitarian conditions and to mitigate occupational risk.
• Managing the rules of conduct and systems related to occupational health and safety in the organization, this includes the development and implementation of the Organization's Occupational Health and Safety Strategy.
• Responsible for the Occupational Health and Safety department in providing technical advice and specialized advice to stakeholders on all issues related to OSH.
• Address short- and long-term technical requirements and administrative operations minimizing risks.
• Direct the Ministry Management Safety programs and established Occupational Health and Safety guidelines.
• Investigate incidents and accidents then made recommendations for process changes, health exposure reduction, and safety protocols.
Established learning materials and syllabus knowledge management systems resources, documents, and training according to IOSH and NEBOSH guidelines related to MODES needs.
• Provide sufficient training in MODES specific safety systems.
• Conducting OH&S training for MODES staffs, junior officers, superintendents, and department managers.
• Accomplish fire drills, evacuation drills, site visits, health and safety inspections, and risk management analysis.
• Provides an awareness training of the common workplace hazards, risks, and safety controls in according to OH&S.
• Provide candidates with basic awareness knowledge and understanding of work within the engineering services industry related to health, safety, environment, and sustainable development issues and on successful completion provide attendees.
Keep informed of activities or changes that could affect the likelihood of an emergency, as well as those that could affect response efforts and details of plan implementation.
• Prepare plans that outline operating procedures to be used in response to disasters or emergencies and in recovery from these events.
• Propose alteration of emergency response procedures based on regulatory changes, technological changes, or knowledge gained from outcomes of previous emergency situations.
• Maintain and update all resource materials associated with emergency preparedness plans.
• Collaborate with other officials to prepare and analyse damage assessments following disasters or emergencies.
• Coordinate disaster response and implementing special needs plans and programs.
• Develop and maintain liaisons with Civil Defence, municipalities, departments, and similar Mutual Aid entities to facilitate plan development, response effort coordination, and exchanges of personnel and equipment.
• Prepare emergency status reports that describe response and recovery efforts, needs, and preliminary damage assessments.
• Design and administer emergency or disaster preparedness training courses that teach people how to effectively respond to major emergencies and disasters.
Providing MODES with specialized expertise in the areas of Fire & Safety issues, accident analysis & risk assessment.
• Representative in the projects design review, including HAZOP, layout reviews of facilities, technical safety reviews and hazard/risk analysis studies. Undertaken implement knowledge and understanding of fire safety science principles.
• Providing independent technical safety review services to all Sultan’s Armed Forces to ensure compliance with corporate and internationally and professionally recognized codes, standards, and regulations.
• Reviewing, based on conceptual and detailed design documents, drawings, and ensuring that design and construction of facilities incorporates safety requirements in line with the formulated project Fire & Safety philosophy.
• Providing technical advice to Projects Directorate on loss prevention and loss control in project layout/spacing, electrical hazardous area classification, and passive and active fire protection system, e.g., Fire water system design and fire proofing, fire and gas detection system, smoke, and toxic gas detection system, Emergency Shut Down (ESD) systems, blow down, vent, and evacuation and survival systems.
Responsible of general supervision of all maintenance work related to the gas equipment’s, whether routine, major, preventive, or emergency, for all kitchen equipment’s, extensions of gas appliances, pipelines, and gas tanks, as well as supervision of all new installations of kitchen equipment.
• Supervising the installation of new gas appliances, provide support service, supervise ordering spare parts.
• Conducting the missions of designing of LPG tanks and LPG pipelines, to provide the Projects Directorate with the necessary information, layouts, surveys, and drawings, as well as reviewing and comment them when required.
• Reviewing the general supervision of the work of repairing kitchen equipment in case of malfunctions in the various sites of the Sultan's Armed Forces facilities and calculating the cost and submit recommendations and estimations.
• Managing the mobilizing kitchens and maintained them for military exercises coordinated by Sultan Army Force.
Manage and supervise all mechanical maintenance work, whether routine, preventive, or emergency maintenance, to ensure the efficient and safe operation of the facilities and systems associated with the power plant.
• Supervising the analysis of mechanical faults in the event of a malfunction in the gas turbines, diesel generators, or other facilities associated with the power station, supervising the repair, working on restarting the power generators, and ensuring the provision of electrical current.
• Checking the availability of mechanical spare parts, order them, and follow up with the concerned authorities, and ensure that there is sufficient stock.
• Supervising and verifying the repair and installation of mechanical parts of the facilities and secondary equipment associated with the power generators or other devices related to the station, restarting them as soon as possible, and working to restart the generators.
• Following-up and supervise the functioning of the mechanic's work team in provisions of the maintenance, repair and maintenance of gas turbines and their associated systems and facilities, diesel machines and their associated systems and facilities.
• Preparing and implementing maintenance programs of all kinds and ensure that they are implemented and applied.
• Responding (24 hours) to emergency faults in the power plant.
Supervising the success of systems and equipment related to the aspects of fire and safety, implementing the prevention and occupational safety policy.
• Managing the inspection and maintenance of all firefighting equipment.
• Executing inspection site visits to all Ministry of Defence Engineering Services districts and undertake inspection of firefighting equipment ensuring effectiveness in case of emergency.
• Maintaining asset records, material request records and maintenance records at fire and safety department.
• Supervising the maintenance of firefighting equipment (all types of extinguishers, fire hoses).
• Supervising all preventive and emergency routine inspection and maintenance work for fire alarms in various sites, camps, and bases.
• Ensuring that technicians are familiar with new techniques and skills in pressurized fire extinguisher filling equipment.
• Managing, directing, and training all technicians working in the department, organizing the process of distributing work, and preparing schedules for routine and preventive maintenance programs
• Assist in preparing lectures in raising awareness of the risks of fire and using various types of prevention.
Conduct all turning works, remanufacturing parts, repair parts, and make the necessary turning.
• Performing cutting process and arranging works for the turning method or filings, and how to fix and fasten the work pieces on the lathe, milling, and shaping machine.
• Creating sketches of various sizes to cut all kinds of metals using the lathe machine.
• Familiarity with the correct layout and measurements of the work to be performed.
• Ensuring the availability of the necessary supplies to do the work and being full knowledge with the use of all turning tools and lathe machines and how to operate them.
• Field knowledge on all inspection, repair, and operation work, various lathe machines, and ability on manufacturing and assembly operations for various turning works.
• Maintain cleaning, arranging machines, and storing cutting tools and measuring tools in a safe and convenient location.
• Carryout modification on auto parts like brake and do engine and boring an engine block and the cylinder block.
• Apply prevention and safety requirements during work and ensure that occupational health and safety measures are applied.
Carryout all repair, maintenance, service, and inspection work for all types of light and heavy vehicles of various models, in addition to supervising all works of vehicle technicians and their assistants.
• Performing all routine, preventive and major maintenance work, repair work at level (first, second, third and fourth), and conducting service for all types of mechanisms and vehicles of various kinds, tools, and mechanical defects.
• Conducting routine, preventive, and major maintenance operations for the vehicles, whether mechanical or electrical.
• Adjusting diesel engines, service valves, fuel filters, turbochargers, fuel pressure check filters, injector height adjustment, injector fuel quantity adjusters, and regulators.
• Carryout regular maintenance checks and maintain to adjust fluid levels, test, and change hoses, V-belts, brake pads, brake disks, tires, and clutch, change filters and oil, and lubricate the necessary points and mechanisms.
• Dismantling units, repairing, or replacing defective parts.
• Diagnose faults, perform service, repair various systems in different vehicles such as mechanical controls, pneumatic brake systems, transmissions, pneumatic and hydraulic systems, and rotating parts, and disassemble and reconnect them.
The beginning of continuous training programs for educational programs designed to provide me with technical knowledge and skills for more than Two years involving for (OJT) out job training and writing technical reports, providing Ides and illustrations and drawings.
• Developed as one of the best leaders in leadership and professionalism and knowledge of various policies and strategies, including training, maintenance, leadership, dealing, management, organization and planning, their maintenance, projects, and technical affairs.
• Learning a specialized skill at MODES carrier and development training centre in general mechanical certificate, authentic by City & Guilds of London Institute, Technical Sciences, Mathematics, Engineering Measurements, Engineering Drawing, and Mechanical fitting -1&2.
Modules studied in academic year 2011/2012 BSC(HONS) FIRE SAFETY ENGINEERING: - Building Technology/Building Regulations. - Engineering Mathematics and Fire Dynamic (1). - Engineering Mathematics and Fire Dynamic (2). - Engineering Services. - Fire Chemistry & Smoke Production. - Fire Materials Science. - Fire Safety Engineering Project. - Fire Suppuration & control. - General principles of Escape/Fire Safety Risk Assessments. - Management and Low. - Software Applications. - Structural Analysis and Design (1). Modules studied in academic year 2012/2013 BSC(HONS) FIRE SAFETY ENGINEERING: - Environmental Studies. - Fire Resistance - Design. - Further Structural Analysis & Design. - Major Project. - Management Techniques. Award Grade: Second Class grade 2.
Fire Safety Engineering at ECOman - 1 - YEAR 1 MODULES AND ITS CONTENTS - OM1020 Preliminary - Fire and Fire Extinction: - Firefighting and Firefighting Equipment: - OM1015 Fire Service Instructor - OM1014 Command and Management I - OM1017 Fire Inspector 1 - OM1050 Mathematics (I). - OM1051 Information Management. - Fire Science. YEAR 2 MODULES AND ITS CONTENTS - Fire Engineering Science. - Command and Management (II). - Fire Inspector (II). - Health and Safety Management. - OM2052 Project
City & Guilds Certificate in Mechanical General Part (1) Good B. Mechanical Apprentice starting study in general mechanical certificate certified from City & Guilds of London Institute it include: - General and Technical English. - Technical Sciences. - Mathematics. - Engineering Measurements. - Engineering Drawing, - Practical general mechanical fitting with machine tools.
لقد تم حذف الرابط بسبب انتهاكه لسياسة الموقع. يرجى التواصل مع قسم الدعم لمزيد من المعلومات.