سامسون NJOROGE, Team Leader

سامسون NJOROGE

Team Leader

RA INTERNATIONAL

البلد
كينيا - Nairobi
التعليم
الثانوية العامة أو ما يعادلها,
الخبرات
30 years, 8 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :30 years, 8 أشهر

Team Leader في RA INTERNATIONAL
  • الإمارات العربية المتحدة
  • أشغل هذه الوظيفة منذ يناير 2005

Duties and Responsibilities
•Operates a variety of earth moving equipment from D6 bulldozers, 135 and 120 graders, backhoes, excavators, off road dump trucks, front end loaders, and all terrain forklifts.
•Coordinates machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
•Assists overhead crane with communicating and coordinating movement of pipe with lengths no shorter than 35ft. long and between 2 to 5.5 inches in diameter with weight varying between 600 to 800 pounds each. Pipe is transported via crane in bundles weighing between 10 to 15 tons.
•Involved in continuous industrial safety training including Lock-Out Try-out, SJP's and SOP's, Fire Watch
•Performs activities such as backfilling excavations, vibrating or breaking rock or concrete.
•Operates and maneuvers equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
•Demonstrates support for organizational changes and improvements including efficiency and cost reduction.
•Administrative procedures as the heavy equipment lead resulted in 100% accountability with zero losses or damage of all supplies, records and sensitive items to assigned equipment.

Heavy Equipment Operator في ZHEJIANG CHENGJIAN CONSTRUCTION
  • كينيا
  • يناير 2017 إلى سبتمبر 2019

Mobile & Tower Cranes) and Front end Loaders
Duties and Responsibilities
•Operated and maintained Peiner Tower Cranes TC 170C & 250C
•Operated and maintained mobile cranes 50 Tons and Front end loaders
•Moved large amounts of sand mulch gravel and other materials
•Loaded materials into large trucks with as little loss as possible
•Performed pre-operation checks on electrical system including start up, limit and load switches, swing and drum motors and brakes.
•Performed preventive maintenance on hydraulic systems - reservoir tank levels, hydraulic hoses, "o" rings and filters.
•Performed inspection and lubrication of mechanical systems - rotating mechanisms including sheaves, pulleys, cables, shafts and bearings.
•Performed pre-plan safety meetings with the foreman/site management to ensure daily work schedules are accomplished in a safe and timely manner.
•Performed pre-operational tests, inspection of load lines and crane parts and scheduled maintenance for lubrication.
•Communicated with adjacent cranes and ground crew to ensure safety and prevent collateral damage among multi-million dollar projects.
•Transferred and quickly adapted to new surroundings multiple times daily between different types of tower cranes.

Heavy Equipment Operator في CHINA NATIONAL AERO
  • الإمارات العربية المتحدة
  • فبراير 2014 إلى سبتمبر 2016

TWO RIVERS DEVELOPMENT PROJECT - RUNDA, KENYA
Multi

Heavy equipment Operator في ASTROL PETROLEUM COMPANY
  • كينيا
  • سبتمبر 2012 إلى نوفمبر 2013

Duties and Responsibilities
•Operated the grader including front end loaders, dozers, trucks, compactors and other mobile equipment in a safe way.
•Avoided potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
•Adjusted hand wheels and depress pedals to control attachments, such as blades, buckets, scrapers, or swing booms.
•Moved throttles, switches, or levers, or depress pedals to operate machines, such as bulldozers, trench excavators, road graders, or backhoes.
•Located underground services, such as pipes or wires, prior to beginning work.
•Monitored operations to ensure that health and safety standards are met.
•Aligned machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment.
•Loaded and moved dirt, rocks, equipment, or other materials, using trucks, crawler tractors, power cranes, shovels, graders, or related equipment.
•Performed daily safety and maintenance checks.
•Ensured access to houses, businesses, and water supply and waste sites.
•Ensured safe storage of heavy equipment.

Mechanical Technician في FAR VISION ELECTRICAL CONTRACTORS
  • كينيا
  • يناير 2011 إلى أغسطس 2012

Duties and Responsibilities
•Performed skilled mechanical repair and maintenance on diesel or gas powered engines.
•Mechanical or automotive equipment to maintain in a safe and operating condition
•Overhauled Allison transmissions and Cummins, Peterbilt, and GM engines
•Tuned, repaired and disassembled motors and repair and replaced parts
•Reconditioned, adjusted ignition, carburettor systems, service and maintain fuel and cooling systems.
•Inspected and diagnose mechanical defects in trucks, automobiles and other mechanical equipment.
•Maintained records of repairs, parts used and names of suppliers, prepare and maintained records of work orders and work performed

Mechanical Technician في NJUNU TEA FACTORY
  • كينيا
  • سبتمبر 2007 إلى ديسمبر 2010

As a technician trainee, I coordinated with the head technician and other technicians on projects needing to be started and completed. I inspected and diagnosed vehicles ranging from small cars to heavy duty trucks. I've diagnosed issues using latest scanning equipment. Replaced transmissions, transfer cases, and other drivetrain components.
•Did routine and preventive maintenance to customer vehicles.
•Removal and installation of transmissions, transfer cases, and differentials
•Disassembled rear ends for rebuild
•Analysed suspension issues and made appropriate corrective changes
•Analysed braking systems and serviced worn brake components
•Diagnosed and resolved electrical issues
•Utilized current scanning technologies to improve proper diagnosis of issues

الخلفية التعليمية

الثانوية العامة أو ما يعادلها,
  • في OSHA Academy
  • سبتمبر 2022
الثانوية العامة أو ما يعادلها,
  • في Cranes & Derricks I &II
  • سبتمبر 2022
الثانوية العامة أو ما يعادلها,
  • في Institute of Lifting and Technology
  • يناير 2019

;

الثانوية العامة أو ما يعادلها, Mechanical Engineering
  • في St. John’s Ambulance Brigade
  • يناير 2016

;

الثانوية العامة أو ما يعادلها, Machines And Equipment
  • في Kenya Institute of Highways and Building Technology
  • يناير 2011

courses: Certificate in Plant Operations and Maintenance

بكالوريوس, Mechanical Engineering
  • في Railway Training Institute
  • يناير 2009

MECHANICAL ENGINEERING

الثانوية العامة أو ما يعادلها, Secondary Education
  • في Ndaka- ini Primary School
  • يناير 2007

diploma in engineering

الثانوية العامة أو ما يعادلها, Secondary Education
  • في Kigumo Bendera High School
  • يناير 2002

;

الثانوية العامة أو ما يعادلها, Secondary Education
  • في Ndaka- ini Primary School
  • يناير 1997

Technician Certification •Technician for Africa

Specialties & Skills

MECHANICAL
ADMINISTRATION
CABLING
COST CONTROL
FORKLIFT OPERATOR
MATERIALS MANAGEMENT
MEETING FACILITATION
ORGANIZATIONAL SKILLS
POSITIONING