مجموع سنوات الخبرة: 16 سنوات, 11 أشهر
سبتمبر 2014
إلى حتى الآن
Instrumentation Engineer
في HOT Engineering & Construction
البلد :
الكويت - الأحمدى
Working as an Instrumentation Engineer in M/s HOT Engineering & Construction in Bulk Handling Facilities for production Chemicals (BHFPC). Major Project executed in Gas Compression Services for GC-16 & Gas Re-Injection at Minagish (GCP-GRIP), KOC West Kuwait.
مايو 2012
إلى سبتمبر 2014
Instrumentation Engineer
في L&T Kuwait Construction
البلد :
الكويت - الأحمدى
Worked as an Electrical & Instrumentation Engineer in M/s L&T Kuwait Construction in Effluent Water Injection Phase-I & Seawater Injection Phase-II Project (EWSW), KOC North Kuwait.
أبريل 2008
إلى أبريل 2012
INSTRUMENTATION ENGINEER
في CONSOLIDATED CONTRACTORS INT'L COMPANY,QATAR
البلد :
قطر - الدوحة
Assist preparing /updating specification & datasheets
Instrumentation Dossier Preparation.
Assist in reviewing and commenting on vendor drawing /documentation
Assist in carrying out multi discipline checks and reviews
Providing inputs to design drafting personnel
Participation in Factory Acceptance Test activities
Yard/Offshore deputation, as required
Preparation of engineering documentation required for the Project
Assist in preparing C&E charts, Safe, philosophies etc
Assist to review vendor drawings /documents for requisitioned items
Assist in providing support to development /standardization activities like procedures, technical instruction, and software development
Assist in capturing scope changes and submit a claim as and when required
Assist in providing responses to the quires raised by Client /Purchase/QA /QC/Construction /Pre-commissioning & Commissioning group
Undergo activities like loop-checking, testing, pre-commissioning & commissioning of Fire & Gas systems & process instrumentation.
Assist in integration activities like PLC based SCADA system for Process instrumentation & F&G system.
Adopt the safest and fastest way of execution for completing the project before the date without affecting the quality.
Manpower controlling and also looks after their welfare
Instrumentation Dossier Preparation.
Assist in reviewing and commenting on vendor drawing /documentation
Assist in carrying out multi discipline checks and reviews
Providing inputs to design drafting personnel
Participation in Factory Acceptance Test activities
Yard/Offshore deputation, as required
Preparation of engineering documentation required for the Project
Assist in preparing C&E charts, Safe, philosophies etc
Assist to review vendor drawings /documents for requisitioned items
Assist in providing support to development /standardization activities like procedures, technical instruction, and software development
Assist in capturing scope changes and submit a claim as and when required
Assist in providing responses to the quires raised by Client /Purchase/QA /QC/Construction /Pre-commissioning & Commissioning group
Undergo activities like loop-checking, testing, pre-commissioning & commissioning of Fire & Gas systems & process instrumentation.
Assist in integration activities like PLC based SCADA system for Process instrumentation & F&G system.
Adopt the safest and fastest way of execution for completing the project before the date without affecting the quality.
Manpower controlling and also looks after their welfare
مايو 2007
إلى أبريل 2008
ELECTRICAL & INSTRUMENTATION ENGINEER
في PCTS
البلد :
الهند - نافي مومباي
Study contract documents, drawings and specifications related to the job scope.
Bids & Proposals that includes bid estimates, detailed execution plans related to Instrumentation areas.
Interacting, discussions and meetings with client for various issues related to engineering scope variations/new proposals.
Assist with procurement manager, project engineering manager, clients and sub-contractors to resolve issues related to engineering/construction/commissioning activities.
Review and approval of engineering design basis for instrumentation scope, submitting to the client and getting approval for the same.
Review of layout drawing (based on plan layout) showing location of all field instruments, junction boxes, cable/pipe routes from instrument room etc.
Review of F&G, Cause & Effect matrix, safety logic drawings and preparation of pre-commissioning & commissioning procedures, Dossiers, Data sheets, Metod statement etc.
Providing inputs to design drafting personnel.
Bill of materials/MTO preparation & review.
Procurement engineering that includes technical bid analysis (TBE), review of vendor drawings (VDR), Material Approval Request (MAR) preparation, inspection & Factory acceptance test.
Design & Check consistency of control & Instrumentation systems in P&ID.
Familiar with ISO 9000 quality procedures.
Familiar with international standards such as ISA, IEC, API, BS, NFPA, IEEE, FM & ATEX standards.
Review Data Sheets, Control Wiring Diagram, Hook-up Drawings, Cable Schedule, Device Index I/O List, Loop Drawings, Termination Drawings, Cause & Effect chart, P&ID and prepare Red Line Marked up in the drawings as per the site modification.
Sent technical enquiry to Vendors, receive quotation from these vendors, check the Technical requirement against specification with vendor & finalize the Vendor for respective Equipment.
Have contacted with Vendors for equipments like Electrical & Process Instruments, F&G Devices & their control Panel, DCS & Field Instruments from various Manufacturers.
Evaluation & Approval of Technical Bid Evaluation of Vendors for Instruments, DCS, ESD, VTMS & F&G system.
Resolving site queries, interfacing co-ordination with different sub-contractors.
Erection & Installation of Inspection of Control systems like DCS/VTMS/ESD/SCADA/PLC/F&G/Flare Package/Inst. Plant air Compressor/Telecom systems & & RTU Panel/Solar panels in Well Heads.
Installation & Inspection of Field Instruments.
Cable laying & testing of both Instrument & F.O Cables.
Calibration & Functionality checking of Field Instruments.
Loop Checking, Pre-Commissioning and commissioning activities of Field Instruments & F&G Devices.
Instrument support fabrication, Hook-up Pre-Commissioning and commissioning of Offshore Platforms & Onshore Installations.
On-site completion activities, start-up and training services upon completion of construction.
Involved in QA/QC inspection and coordination till Mechanical Completion of Systems.
Assist in integration activities like PLC based SCADA, DCS, ESD, VTMS system for Process instrumentation & F&G system
Adopt the safest and fastest way of execution for completing the project before the
date without affecting the quality
Bids & Proposals that includes bid estimates, detailed execution plans related to Instrumentation areas.
Interacting, discussions and meetings with client for various issues related to engineering scope variations/new proposals.
Assist with procurement manager, project engineering manager, clients and sub-contractors to resolve issues related to engineering/construction/commissioning activities.
Review and approval of engineering design basis for instrumentation scope, submitting to the client and getting approval for the same.
Review of layout drawing (based on plan layout) showing location of all field instruments, junction boxes, cable/pipe routes from instrument room etc.
Review of F&G, Cause & Effect matrix, safety logic drawings and preparation of pre-commissioning & commissioning procedures, Dossiers, Data sheets, Metod statement etc.
Providing inputs to design drafting personnel.
Bill of materials/MTO preparation & review.
Procurement engineering that includes technical bid analysis (TBE), review of vendor drawings (VDR), Material Approval Request (MAR) preparation, inspection & Factory acceptance test.
Design & Check consistency of control & Instrumentation systems in P&ID.
Familiar with ISO 9000 quality procedures.
Familiar with international standards such as ISA, IEC, API, BS, NFPA, IEEE, FM & ATEX standards.
Review Data Sheets, Control Wiring Diagram, Hook-up Drawings, Cable Schedule, Device Index I/O List, Loop Drawings, Termination Drawings, Cause & Effect chart, P&ID and prepare Red Line Marked up in the drawings as per the site modification.
Sent technical enquiry to Vendors, receive quotation from these vendors, check the Technical requirement against specification with vendor & finalize the Vendor for respective Equipment.
Have contacted with Vendors for equipments like Electrical & Process Instruments, F&G Devices & their control Panel, DCS & Field Instruments from various Manufacturers.
Evaluation & Approval of Technical Bid Evaluation of Vendors for Instruments, DCS, ESD, VTMS & F&G system.
Resolving site queries, interfacing co-ordination with different sub-contractors.
Erection & Installation of Inspection of Control systems like DCS/VTMS/ESD/SCADA/PLC/F&G/Flare Package/Inst. Plant air Compressor/Telecom systems & & RTU Panel/Solar panels in Well Heads.
Installation & Inspection of Field Instruments.
Cable laying & testing of both Instrument & F.O Cables.
Calibration & Functionality checking of Field Instruments.
Loop Checking, Pre-Commissioning and commissioning activities of Field Instruments & F&G Devices.
Instrument support fabrication, Hook-up Pre-Commissioning and commissioning of Offshore Platforms & Onshore Installations.
On-site completion activities, start-up and training services upon completion of construction.
Involved in QA/QC inspection and coordination till Mechanical Completion of Systems.
Assist in integration activities like PLC based SCADA, DCS, ESD, VTMS system for Process instrumentation & F&G system
Adopt the safest and fastest way of execution for completing the project before the
date without affecting the quality
مايو 2007
إلى أبريل 2008
Instrumentation Engineer
في PCTS
البلد :
الهند - مومباي
Worked in M/s Process Construction & Technical Services Pvt. Ltd. (PCTS) as an Electrical & Instrumentation Engineer for various offshore & onshore projects. The main project executed in PRP PHASE-III, BCP- B2 Hook Up & Commissioning at Bassein Offshore oil field of ONGC with M/s Larsen & Toubro Ltd.
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني