Principal Piping Engineer
GS E&C
Total years of experience :15 years, 1 Months
• Ensure all design related deliverables are in compliance with the code requirements, GS guidelines, process requirements, project procedures requirements
• Coordinate with the Resident Engineer & execution team to understand/ maintain uniformity.
• Progress monitoring & monthly micro-planning & man power planning for the unit.
• Review of the vendor drawing & commenting.
• Regular model review & provide technical inputs to the design team.
• Preparation of Equipment layout & MTO.
• Review the design/safety/operation requirements.
• Timely resolution to the technical and engineering issues.
• Preparation of Job Instruction for piping Design works.
• Review of project contract requirements.
• Review manpower, the project schedule & Project progress.
• Review vendor data & provide comments.
• Coordinate with the lead engineer & other disciplines.
• Mentor & delegate the responsibility to the area engineers
Projects handled & responsibilities-
• Responsible for pipe rack Study, design
(finalisation of number of tier & width of pipe
rack (length 2.5KM and sleeper 1.5 k.m.
• Preparation of Civil information for the entire
pipe rack.
• Development of overall plot plan, equipment
layout, MTO
• Issuance of piping design basis and piping
specification
• Piping Study, Man power Planning and progress
report
• Review/study of contract documents
• Coordination with other discipline
• Progress monitoring & micro-planning for the
unit
• Review of the vendor drawing & commenting.
• Worked as lead engineer (Piping) for Urea
Granulation Plant
• Development of overall plot plan, equipment
layout, MTO
• Preparation of Civil information drawing for the
entire plant.
• Checking/commenting for the vendor drawing,
Worked as field Engineer at Habshan -5 project, Abudhabi.
Piping Design Engineer, Layout Design, Isometric preparation, Vendor Drawing Commenting.
Working on deputation at Gasco, habshan-5, Abu Dhabi as a "Field Engineer" since September, 2011 for expediting the progress of site mechanical completion.
Projects handled in Tecnimont ICB, Mumbai
1) Worked on Abu Dhabi Gas Company (GASCO) Project as an Area lead of Tri Ethylene Glycol (TEG) unit & Acid Gas removal Unit since December 2009 to September, 2011. In this unit the feed gas is sweetened by removing acid gas. This involves mainly two units. Absorption of acid gas and Regeneration of solvent.
Responsibilities: Piping engineering execution portions of project against the P&ID'S, Isometric, and Data Sheets etc. to ensure is in compliance with project.
• Working as an area coordinator for acid gas recovery unit.
• Development of Plot Plan, Equipment layout.
• Preparation of piping drawings including Piping Layouts, Isometric Sketches and General Arrangement Drawings (GA's) Plans/Sections/Details.
• Development of Civil input drawings like Rack Input, Platform & Ladder requirement, Civil support requirements etc.
• Managing nozzle orientation, platform & ladder orientations for various equipment including providing cleat locations to equipment vendors required for pipe supports and also involved at the plot plan development studies for finalizing equipment locations.
•. Reviewing & commenting of Piping & Instrumentation Diagrams, Process Flow Diagrams, Line Designation Tables, Inter-disciplinary Drawings and Vendor Drawings of all other engineering disciplines.
• Isometric checking and issuing.
TECHNICAL EXPERTISE IN CHRONOLOGICAL ORDER
I) Tecnimont ICB -Working in Tecnimont ICB since November, 2007.
Site and Abroad Experience: Working for GASCO HABSHAN-5, Abu Dhabi site
Responsibilities- Test package checking, site modifications isometrics, Checking the critical lines erections and their supports, Final check of drawing before erection, assisting in pre-commissioning activities.
Reliance Engineering Associates Limited, Jamnagar, Gujarat September 2005 -November 2007
ll) Worked with "Reliance Engineering Associates Ltd". As a Piping Design Engineer the world's largest grass root refinery project "Jamnagar Export Refinery Project (JERP) "from Sept 2005 to October 2007.
✓ Worked for "Jamnagar Export Refinery Project" in Crude Unit as team member.
Responsibilities-
• Piping Modeling with PDS software and Iso -extraction
• Development of Plot Plan, Nozzle Orientation of Vessel and Tower.
• Development of Piping Layout for different Equipments.
• 3D Piping and Equipment modeling using PDS
Isometric extraction and error fixing using PDS
• Development of Civil input drawings like Rack Input, Platform & Ladder requirement, Civil support requirements etc.
• Bulk MTO preparation
• Co-ordination with various disciplines Mechanical, Civil, including Operations and Maintenance team of the Refinery complex.
lll) Worked for "Pipecon Engineers (P) Limited", Mumbai, from July 2004 to August 2005 as a Piping Design Engineer.
✓ Was involved in Preparing Bulk MTO, Isometric preparation.
✓ 3D Piping and Equipment modeling using PDS.
✓ Secondary support mark-up for big bore lines.
✓ Isometric extraction and error fixing using PDS
✓ Was involved in Preparing Bulk MTO, Isometric preparation.
✓ Detail Engineering of process area and layout preparation.
lV) Worked with M/s "DLJM P limited", Noida Ph-2 since July 2002 to 10 July, 2004 as an Engineer & worked in various projects
Responsibilities
• Material Take off
• Isometric Preparation and checking.
• P&ID Mark-up as per engineering changes.
• Equipment layout checking i.e. location of pumps and equipments
➢ Certificate course in Piping Engineering from Suvidya Institute of technology, Santa Cruz, Mumbai, with distinction
➢ Passed B.E. (Chemical Engineering) from, C.C.S. University, Meerut (UP) in 2002 with 67.1 %.
➢ Passed H.S.C. in the year 1997 from U.P. Board.
➢ Passed S.S.C. in the year 1995 from U.P. Board.