Senior Estimation Engineer
Abdullah H. Shuwayer & Sons Co.
Total des années d'expérience :15 years, 5 Mois
Identifying customer requirements, making models and prototypes of products using Computer assisted engineering and design software.
Reading electrical design specifications and technical drawings.
Evaluating technical and commercial specifications and makes of equipment.
Following up with vendors for quotation
Preparation of Electrical procedures for installation test & commissioning also Operation and Maintenance report.
Organizing Panel Routine test schedules.
Making sure all electrical engineering projects are fit for purpose.
Preparing the list of Commercial and technical clarifications and deviation list.
Modification Job works for Oil field related projects.
Preparing compliance for all engineering documents and specifications.
Performs detailed calculations to compute and establish construction and installation standards and specifications.
Liaising with and monitoring third party contractors.
Negotiating with suppliers and purchase items at optimum cost. Attending meetings, writing reports and giving presentations to managers and clients.
Keeping the documents in proper format after submitting tender.
Technical Submittals, Load Calculations, Heat loss Calculations.
Designing the panel before detailed engineering using SIEMENS and Eaton X-Energy software.
Evaluate scope of work and all technical aspects thoroughly in order to determine whether our company can participate in the bidding or not.
• Assessing risks.
• Doing cost estimates.
• Forecasting.
• Reviewing proposed schedules.
• Implementing bets practices.
• Performing cost control.
• Analyzing variances.
• Preparation of contracts, including details regarding quantities of required materials.
• Budgeting and Comparison.
• Develop and update cost and resource loaded construction schedules.
• Submit monthly reports to Project Manager and support internal reports preparation.
• Verify scope trends and estimate costs by using contract terms.
• Site visits, assessments and projections for future work.
I independently handled all activities of Switchgear bidding from the time of enquiry/tender received from client and until purchase order confirmed by client/customer and the related data forwarded to design department for production process. Details of my functions is detailed below:
Identifying customer requirements, making models and prototypes of products using Computer assisted engineering and design software.
Reading electrical design specifications and technical drawings.
Evaluating technical and commercial specifications and makes of equipment.
Following up with vendors for quotation
Preparation of Electrical procedures for installation test & commissioning also Operation and Maintenance report.
Organizing Panel Routine test schedules.
Making sure all electrical engineering projects are fit for purpose.
Preparing the list of Commercial and technical clarifications and deviation list.
Modification Job works for Oil field related projects.
Preparing compliance for all engineering documents and specifications.
Performs detailed calculations to compute and establish construction and installation standards and specifications.
Liaising with and monitoring third party contractors.
Negotiating with suppliers and purchase items at optimum cost. Attending meetings, writing reports and giving presentations to managers and clients.
Keeping the documents in proper format after submitting tender.
Designing the panel before detailed engineering using Eaton X-Energy software.
I independently handled all activities of Switchgear bidding from the time of enquiry/tender received from client and until purchase order confirmed by client/customer and the related data forwarded to design department for production process. Details of my functions is detailed below:
Identifying customer requirements, making models and prototypes of products using Computer assisted engineering and design software.
Reading electrical design specifications and technical drawings.
Evaluating technical and commercial specifications and makes of equipment.
Following up with vendors for quotation
Preparation of Electrical procedures for installation test & commissioning also Operation and Maintenance report.
Organizing Panel Routine test schedules.
Making sure all electrical engineering projects are fit for purpose.
Preparing the list of Commercial and technical clarifications and deviation list.
Preparing compliance for all engineering documents and specifications.
Performs detailed calculations to compute and establish construction and installation standards and specifications.
Liaising with and monitoring third party contractors.
Negotiating with suppliers and purchase items at optimum cost. Attending meetings, writing reports and giving presentations to managers and clients.
Keeping the documents in proper format after submitting tender.
Evaluate scope of work and all technical aspects thoroughly in order to determine whether our company can participate in the bidding or not.
Responding immediately to equipment breakdowns and diagnosing faults. \n \nFixing faults or arranging for replacements to be installed. \n \nMaking scheduled checks on machinery and parts. \n \nFinding and fixing faults and recalibrating instruments, oiling and cleaning machinery and parts \n \nChange over systems during power failure and general maintenance of machineries. \n \nOverhauling and replacing parts according to schedule. \n \nWorking on transmission line and transformers. \n \nAssembling the fault motors. \n \nPerformed power consumption studies. \n \nWork allocation for technicians. \n \nSupervision of production at various stages. \n \nTesting & commissioning of all panels, prepare inspection reports/test certificates etc. \n \nOrganizing routine servicing schedules. \n \nAllocating work to a team of fitters \n \nChecking and calibrating instruments to make sure they are accurate. \n \nEnsuring safety of shop floor workers. \n \nElectrical installations and equipment maintenance; i.e. line maintenance, transformers, up-ratings of transformers i.e. bringing in reinforcement transformers, dividing the medium voltage lines to equalize loads, and maintenance of the switch like MCCB, ring major units and the Air circuit breakers and Vacuum Circuit breakers. \n \nPreparing shutdowns and handling all events related to them that are load transfers, issuing of safety needs and permit-to-work until restoration.
Power Plant maintenance works.
Responding immediately to equipment breakdowns and diagnosing faults.
Detailed maintenance works during plant shutdown.
Economizer and turbine maintenance works during plant shutdown.
Fixing faults or arranging for replacements to be installed.
Making scheduled checks on machinery and parts.
Finding and fixing faults and recalibrating instruments, oiling and cleaning machinery and parts
Change over systems during power failure and general maintenance of machineries.
Overhauling and replacing parts according to schedule.
Working on transmission line and transformers.
Assembling the fault motors.
Performed power consumption studies.
Work allocation for Junior Engineers and technicians.
Supervision of production at various stages.
Prepare inspection reports/test certificates etc.
Organizing routine servicing schedules.
Checking and calibrating instruments to make sure they are accurate.
Ensuring safety of shop floor workers.
Electrical installations and equipment maintenance; i.e. line maintenance, transformers, up-ratings of transformers i.e. bringing in reinforcement transformers, dividing the medium voltage lines to equalize loads, and maintenance of the switch like MCCB, ring major units and the Air circuit breakers.
Preparing shutdowns and handling all events related to them that are load transfers, issuing of safety needs and permit-to-work until restoration.
Handling the development of lighting, wiring systems, electric motors and utilities.
Operation and Maintenance of Electrical and Mechanical System, Utilities and Machineries.
Earth-pit testing and periodical maintenance.
Organizing teams to make sure 24-hour cover is available.
Ensuring compliance with health and safety legislation.
Responding immediately to equipment breakdowns and diagnosing faults. \n \nFixing faults or arranging for replacements to be installed. \n \nMaking scheduled checks on machinery and parts. \n \nFinding and fixing faults and recalibrating instruments, oiling and cleaning machinery and parts \n \nChange over systems during power failure and general maintenance of machineries. \n \nOverhauling and replacing parts according to schedule. \n \nWorking on transmission line and transformers. \n \nAssembling the fault motors. \n \nPerformed power consumption studies. \n \nWork allocation for technicians. \n \nSupervision of production at various stages. \n \nTesting & commissioning of all panels, prepare inspection reports/test certificates etc. \n \nOrganizing routine servicing schedules. \n \nAllocating work to a team of fitters \n \nChecking and calibrating instruments to make sure they are accurate. \n \nEnsuring safety of shop floor workers. \n \nElectrical installations and equipment maintenance; i.e. line maintenance, transformers, up-ratings of transformers i.e. bringing in reinforcement transformers, dividing the medium voltage lines to equalize loads, and maintenance of the switch like MCCB, ring major units and the Air circuit breakers and Vacuum Circuit breakers. \n \nPreparing shutdowns and handling all events related to them that are load transfers, issuing of safety needs and permit-to-work until restoration. \n \nRO Water Plant, Chiller, Compressor handling etc., \n \nHandling the development of lighting, wiring systems, electric motors, navigation systems and utilities. \n \nOperation and Maintenance of Electrical and Mechanical System, Utilities and Machineries. \n \nOperation and maintenance of DG Sets. \n \nOrganizing teams to make sure 24-hour cover is available. \n \nEnsuring compliance with health and safety legislation.