Syed Adil  Hussain, BICSI RCDD Certified Telecom and ELV Engineer

Syed Adil Hussain

BICSI RCDD Certified Telecom and ELV Engineer

HAKA (CWF for King Abdullah University of Science &Technology -KAUST)

Lieu
Arabie Saoudite
Éducation
Baccalauréat, Electronics and Communications Engineering
Expérience
16 years, 4 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :16 years, 4 Mois

BICSI RCDD Certified Telecom and ELV Engineer à HAKA (CWF for King Abdullah University of Science &Technology -KAUST)
  • Arabie Saoudite - Thuwal
  • Je travaille ici depuis juin 2016

Responsibilities: To ensure generation of Engineering design, Implementation, testing and commissioning with deliverables prepared with due diligence after appropriate consideration of code requirement and comprehensive compliance with Quality Systems Procedure.
Projects:
 Harbour Rectification Program for 65 buildings
 Smart Villa Modernisation Project (Pilot Villa)
Job description:-
 Developing detailed design solutions and being responsible for the delivery of a range for Voice, Data, Wireless, Intercom, IoT enabled devices, Intrusion Detection, CCTV, ACS.
 Audio Visual Systems and other ELV systems, ensure that selection and requisition of materials performed as per specifications for SMART Villa Project.
 Lead & own the process of approving the Design T& C efficiently implementing the outside and inside plants used to provide voice, data, IPTV, CCTV and wireless networks for 65 buildings.
 Develop a project specific system design with all associated documentation (layouts, specifications, block diagrams, calculations, etc.).
 Act as package engineer for Telecom packages and work in close cooperation to perform technical bid evaluations.
 Review vendor data and ensure sub-systems are properly integrated and/or interfaced.
 Ensure that interfaces with other disciplines are consistent and aligned.
 Design and implement of Out-side plant Conduit system, Manholes and Pedestals Ensure that the system is fully in line with the Regulatory, Classification requirements, standards and Client requirements.
 Actively provide feedback to Group Technical Standards to assure continuous improvement and maintaining the competitiveness in regards of technical solutions and cost effectiveness.
 Project approval for Engineering Detail Design and Issue for Construction (IFC) stages that submitted by Contractor.
 Monitor the project implementation and construction phase and ensure the ELV(Extra Low Voltage) cope of the projects are compliance with KAUST ITNC Standard
 Preparation of Scope of Work and Project Specification
 Finding creative solutions to the challenges of network design of different telecom rooms to Centralized Telecom Room.
 Apply Engineering design standards
 Coordinate with different Engineering groups and Operation IT entities to review/design/approve ELV scope
 Decommissioning for existing system & Preparation of EIL Items
 Professional experience in Projects conceptual design (System architecture, Specifications & Design calculation)

Communication Engineer à Al Muhaidib (Thabat) Contracting Company
  • Arabie Saoudite
  • novembre 2014 à avril 2016

 Responsible for implementation of all Fibre Optic Cable and UTP pulling, Splicing, termination, testing and commissioning of data, VoIP, video, wireless, IPTV outlets and fibre backbone connectivity.
 Lead the Telecom team and manage the flow of information to team(s) and / or Telecom Integrator to enable them to prepare Layouts, Cable Block diagrams, Termination diagrams, Loop diagrams, Cable list, Junction box list and Bulk MTOs.
 Coordinating with the ARAMCO PMT and KAUST proponent authorities for the implementation of Project as per International and ARAMCO standards
 Performing site inspection, implementing guidelines of OSP/ISP Engineering practices with familiarization of Saudi Aramco Engineering Standards (SAES)
 Closing Exceptional items lists (EIL) with KAUST Stake holders


 Provide material take-off and bill of quantities as per the project requirement
 Preparing material submittals as per IFC (Issue For Construction drawings)
 Supervising for the Preparation of duct banks as per the IFC
 Responsible for pulling, splicing and testing of 4 loops of over 12 kms of FOC from Alternate exchange buildings to Substation4, Substation 5 & inside the KAUST University
 Preparation of redline drawings & as build drawings
 Ensure project is done in compliance with Saudi Aramco and international standards & specification
 Attending RFI & coordinating with ARAMCO PID for clearance.

Senior Engineer à Mobiserve Holding
  • Émirats Arabes Unis
  • mars 2012 à septembre 2014

for GSM & Wireless
Projects
Date of Employment:

Project In charge à Communications Solutions Company (CSC)
  • Émirats Arabes Unis
  • décembre 2009 à février 2012

Implementation of OSP work
Client : Saudi Electricity Company (SEC)
Certification : SEC work permit receiver(Expired)
Project : FOC link at SEC-CTA(COA & EOA) fro Extending
WAN Connections to IT & C sites
Job description:-
 Planning and coordinating all activities of designated project to
ensure that all goals or objectives of the project are accomplished
within prescribed time frame and funding parameters.
 Establishing work plan and staffing for each phase of project.
 Conferring with project staff to outline work plan and to assign
duties, responsibilities, and scope of authority.
 Assuring all the project and quality documentations are received
on prescribed time and approved by the concerned department.
 Identifying risks and issues and updating plans accordingly.
 Responsible for all aspects of construction, inspection, as built,
implementation and onsite work
 Construction of duct bank, MH laying and subduct installation
from MH to MH as per SEC
 Manage and Build team of engineers, technicians and skilled
labors
 Prepare cost estimates, labour estimates, material requirements
for work orders for outside plant facilities while meeting quality,
time and budget constraints
 FOC Links from SEC office to various Substations or Power
Plants.
i. Sudair S/S 8502 to Sudair Local Office
ii. Shaqra S/S 8500 to Washim Local Office
iii. Rahima S/S to Rahima Local Office
iv. Shedgum P/P to Shedgum 380 kv
v. Abqaiq 230 kv to Abqaiq S/S

Telecommunication Engineer à Alliance Communication Solutions
  • Émirats Arabes Unis
  • mars 2007 à mars 2009

Programing & Installation of NEC PABX systems
Job description:-
* Structure cabling Installation and programming of NEC PABX
(NEC IPS, NEC ASPIRE and NEC TOPAZ) and Voicemail
* Worked on various hotels and Offices projects
Projects:
i. AL KHALEEJ HOILDAYS GROUP OF HOTELS Dubai
ii. OVERSEAS AST. Dubai

Éducation

Baccalauréat, Electronics and Communications Engineering
  • à Jawaharlal Nehru Technical University
  • septembre 2021

courses: RCDD (Registered Communication Distribution Designer)Certified * Fluke-CCTT Certified * Commscope Certifications: a. SP3000 - Structured Cabling Infrastructure design b. SP3321 - SYSTIMAX Design and Engineering

Specialties & Skills

Project Execution
Coordination
CUSTOMER RELATIONS
QUALITY
DELIVERY
DOCUMENTATION
DUE DILIGENCE
ENGINEERING
MATERIALS MANAGEMENT
NETWORKING

Profils Sociaux

Site Web Personnel
Site Web Personnel

Le lien a été supprimé pour non-respect des conditions d'utilisation. Veuillez contacter l’équipe d'assistance pour plus d'informations.

Langues

Anglais
Expert
Urdu
Expert

Adhésions

BICSI
  • Active member
  • June 2019

Formation et Diplômes

BICSI- RCDD(Registered Communications Distribution Designer) (Certificat)
Date de la formation:
December 2021
Valide jusqu'à:
December 2023