Total des années d'expérience: 15 Années, 2 Mois
juillet 2018
A À présent
Electrical Draughtsman
Jai trouvé cet emploi à travers Bayt.com
à Legrand
Lieu :
Arabie Saoudite - Jeddah
BUSWAY DESIGNER at Legrand / Bahra -TBS (Transformer & Busway Solutions).
Location Jeddah Governorate, Saudi Arabia
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer Legrand standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
Ajdan Walk -Dammam (Successfully Completed)
Saudi Can Factory -Jeddah) (Successfully Completed)
Riyadh Hospital (Successfully Completed)
Fasaliyah Mall -Riyadh (Successfully Completed)
Awan Hotel -Makkah (Successfully Completed)
Mouwasat Hospital-Dammam (Successfully Completed)
Khober Sea Water Plan- Khobar (Successfully Completed)
Schlumberger-Dammam (Successfully Completed)
PSMMC-Al Hada - Riyadh (Successfully Completed)
KAUST-2 - Jeddah (Successfully Completed)
Tamteen Factory - Riyadh (Successfully Completed)
Al Nakheel Mall- Riyadh (Successfully Completed)
SRCC- Abha (Partially Completed)
Abha Private Hospital (Partially Completed)
King Salman Hospital- Riyadh (Working)
Khames Mushayt Central Hospital (Working) see less
Location Jeddah Governorate, Saudi Arabia
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer Legrand standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
Ajdan Walk -Dammam (Successfully Completed)
Saudi Can Factory -Jeddah) (Successfully Completed)
Riyadh Hospital (Successfully Completed)
Fasaliyah Mall -Riyadh (Successfully Completed)
Awan Hotel -Makkah (Successfully Completed)
Mouwasat Hospital-Dammam (Successfully Completed)
Khober Sea Water Plan- Khobar (Successfully Completed)
Schlumberger-Dammam (Successfully Completed)
PSMMC-Al Hada - Riyadh (Successfully Completed)
KAUST-2 - Jeddah (Successfully Completed)
Tamteen Factory - Riyadh (Successfully Completed)
Al Nakheel Mall- Riyadh (Successfully Completed)
SRCC- Abha (Partially Completed)
Abha Private Hospital (Partially Completed)
King Salman Hospital- Riyadh (Working)
Khames Mushayt Central Hospital (Working) see less
mai 2013
A juillet 2018
BUSWAY DESIGNER
Jai trouvé cet emploi à travers Bayt.com
à AL QURAISHI ELECTRICAL SERVICES (AQESA)
Lieu :
Arabie Saoudite - Jeddah
Al- Quraishi Electrical Services (AQESA)
Bus way Division
EATON Bus way
Attended 7-day training program on Eaton Cutler-Hammer Busway’s 3D Isometric Drawing preparation at Dubai.
WORK EXPERIENCE
15 May 2013 - July 2018.
Al- Quraishi Electrical Services (AQESA)
Busway Division
EATON Busway
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer Eaton standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings to manufacturer to proceed for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
HOLY HARAM Expansion Project -Makkah (Successfully Completed)
KAAU (King Abdul Aziz University -Jeddah) (Successfully Completed)
CUC Utility Tunnel -Makkah (Successfully Completed)
CUC Central Waste Plant -Makkah (Successfully Completed)
HOLY HARAM SERVICE BUILDING -Makkah (Partially Completed) -Project on Hold
Bus way Division
EATON Bus way
Attended 7-day training program on Eaton Cutler-Hammer Busway’s 3D Isometric Drawing preparation at Dubai.
WORK EXPERIENCE
15 May 2013 - July 2018.
Al- Quraishi Electrical Services (AQESA)
Busway Division
EATON Busway
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer Eaton standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings to manufacturer to proceed for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
HOLY HARAM Expansion Project -Makkah (Successfully Completed)
KAAU (King Abdul Aziz University -Jeddah) (Successfully Completed)
CUC Utility Tunnel -Makkah (Successfully Completed)
CUC Central Waste Plant -Makkah (Successfully Completed)
HOLY HARAM SERVICE BUILDING -Makkah (Partially Completed) -Project on Hold
janvier 2012
A mai 2013
Autocad Busway Designer
à Electric House Est.
Lieu :
Arabie Saoudite - Jeddah
January 2012 - 13 May 2013
Electric House
Bus way Division
Ge Bus way
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer GE standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings to manufacturer to proceed for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
CMA Tower in Riyadh.
KAFD # 5.07 & 5.08 in Riyadh.
MASSA AC Plant in Makkah.
Electric House
Bus way Division
Ge Bus way
Job Responsibility:
• Verifying the drawing sent by contractor.
• Comparing the contractor drawings with exact site conditions through site survey and measurements.
• Finalizing the busway routing in coordination with contractor.
• Preparation of 2D plan and Elevation drawings according to finalized routing.
• Submission of drawings to contractor for their approval.
• Preparation of 3D Isometric drawings and Bill of quantities as per Manufacturer GE standards.
• Submission of drawing for consultant approval.
• Once approved, release of drawings to manufacturer to proceed for manufacturing.
• Preparation of As-built drawings as per site installations.
Projects Worked:
CMA Tower in Riyadh.
KAFD # 5.07 & 5.08 in Riyadh.
MASSA AC Plant in Makkah.
juillet 2010
A décembre 2011
Autocad Draftsman
à Eng. Ibrahim M. Madani Trading & Contracting Est
Lieu :
Arabie Saoudite - Jeddah
Engr. Ibrahim M. Madani Trading & Contracting Est.,
Jeddah.
Auto Cad and Asst. Accounts.
Position Responsibilities: Personal Auto Cad and Asst. Accounts
Preparation of Arc Drawing, Plan, Section and Elevations Presentation Drawings Undertaken construction plan & accordingly preparation of Constructional Drawings
Job specific tasks, including daily routine correspondence, paperwork, management of accounts
Record keeping, office management, and responsibility for information systems
Maintains various databases.
All type of internet works, Sending, Receiving, Browsing etc.
Jeddah.
Auto Cad and Asst. Accounts.
Position Responsibilities: Personal Auto Cad and Asst. Accounts
Preparation of Arc Drawing, Plan, Section and Elevations Presentation Drawings Undertaken construction plan & accordingly preparation of Constructional Drawings
Job specific tasks, including daily routine correspondence, paperwork, management of accounts
Record keeping, office management, and responsibility for information systems
Maintains various databases.
All type of internet works, Sending, Receiving, Browsing etc.
septembre 2009
A juin 2010
Computer Operator
à Goodies International.
Lieu :
Arabie Saoudite - Jeddah
Goodies International (Medad Group) - Jeddah.
Computer Operator
Position Responsibilities: Asst. Warehouse In charge.
Maintain all the reports to inn & out Goods, Transfer Orders and Maintain Inventory every Month.
Maintain Daily Return Report, Expiry Items.
To Manage, Maintains & controlling all activities of Warehouse.
Manage all the Production.
We perform this type of work in Company Na vision Software.
Computer Operator
Position Responsibilities: Asst. Warehouse In charge.
Maintain all the reports to inn & out Goods, Transfer Orders and Maintain Inventory every Month.
Maintain Daily Return Report, Expiry Items.
To Manage, Maintains & controlling all activities of Warehouse.
Manage all the Production.
We perform this type of work in Company Na vision Software.
novembre 2008
A juin 2009
Autocad Draftsman
à Innovative Engineering, Karachi – Pakistan
Lieu :
Pakistan - Karachi
Innovative Engineering, Karachi - Pakistan
Auto CAD Architecture Draftsman
Preparation of Arc Drawing, Plan, Section and Elevations Presentation Drawings
Undertaken construction plan & accordingly preparation of Constructional Drawings
Developed and prepared detailed structural designs and drawings from preliminary concepts sketch specification sheets.
Prepared Site plans, Housing Plots Layouts, Villa, Commercial Building and College Layouts.
Managed & undertaken Multistoried Drawing tasks and completed as per the clients demands.
Auto CAD Architecture Draftsman
Preparation of Arc Drawing, Plan, Section and Elevations Presentation Drawings
Undertaken construction plan & accordingly preparation of Constructional Drawings
Developed and prepared detailed structural designs and drawings from preliminary concepts sketch specification sheets.
Prepared Site plans, Housing Plots Layouts, Villa, Commercial Building and College Layouts.
Managed & undertaken Multistoried Drawing tasks and completed as per the clients demands.
Partager sur Facebook
Partager sur Twitter
Partager via Email