UMAR IQBAL

To make sure the work progress is as per specification, within the cost limits and quality
•To prepare the bar bending schedule
•Perform all daily inspection and test of the scope and character necessary to achieve the quality of
construction required in the drawings and specifications
•Cary out inspection and checking for all quality related procedures in the site and ensures activity at
the site are as per approved method statement and inspection test plan.
•Taking care of QA/QC documents of the entire project including certificates, calibration, test results,
inspection requests, non-compliance reports and site instruction/observations, permanent materials
delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and
Site Instruction, SI.
•Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of
engineering construction relating to Civil, Architectural and Structural discipline interfacing the
multidisciplinary operations.
•Develop method statement for the activity including risk assessment and job safety environmental
analysis and Inspection Test Plan and Checklist based on specifications of the project.
•Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.
•To ensure the availability of material is in accordance with the specifications
•Coordinate with the consultant’s representative and Site In-charge for inspection and meeting about
quality problems including the closure of Non-Compliance Report.
•To attend the pre-construction meetings before the start of any particular activity.
•Reading and applying charts and drawings.
•Calculating concrete quantities and coordinating with the supplier plants.
•Resolving any unexpected technical difficulties and other problems that may arise.

To make sure the work progress is as per specification, within the cost limits and quality
•To prepare the bar bending schedule
•Perform all daily inspection and test of the scope and character necessary to achieve the quality of
construction required in the drawings and specifications
•Cary out inspection and checking for all quality related procedures in the site and ensures activity at
the site are as per approved method statement and inspection test plan.
•Taking care of QA/QC documents of the entire project including certificates, calibration, test results,
inspection requests, non-compliance reports and site instruction/observations, permanent materials
delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and
Site Instruction, SI.
•Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of
engineering construction relating to Civil, Architectural and Structural discipline interfacing the
multidisciplinary operations.
•Develop method statement for the activity including risk assessment and job safety environmental
analysis and Inspection Test Plan and Checklist based on specifications of the project.
•Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.
•To ensure the availability of material is in accordance with the specifications
•Coordinate with the consultant’s representative and Site In-charge for inspection and meeting about
quality problems including the closure of Non-Compliance Report.
•To attend the pre-construction meetings before the start of any particular activity.
•Reading and applying charts and drawings.
•Calculating concrete quantities and coordinating with the supplier plants.
•Resolving any unexpected technical difficulties and other problems that may arise.

Role :construction Different buildings of the new cement Plant. CF Silo, Cement Silo, Clinker Silo,
Raw material, Cement Peroration Station frame Structure Building and Silo, Clinker Transport,
Cement Transport . Total BOQ cast of Bidding 450 Million ( PKR)
Responsibilities: -
•To make sure the work progress is as per specification, within the cost limits and quality
•To prepare the bar bending schedule
•Perform all daily inspection and test of the scope and character necessary to achieve the quality of
construction required in the drawings and specifications
•Cary out inspection and checking for all quality related procedures in the site and ensures activity at
the site are as per approved method statement and inspection test plan.
•Taking care of QA/QC documents of the entire project including certificates, calibration, test results,
inspection requests, non-compliance reports and site instruction/observations, permanent materials
delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and
Site Instruction, SI.

Project Description: Construction of Green Coke Silos by slip forming and construction of substations at CBDC project, TAKREER Oil Refinery, Ruwais, Abu Dhabi.
Responsibilities: -
• To make sure the work progress is as per specification, within the cost limits and quality
• To prepare the bar bending schedule
• Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications
• Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI.
• Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.
• Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.
• Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.
• To ensure the availability of material is in accordance with the specifications
• Coordinate with the consultant’s representative and Site In-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report.
• To attend the pre-construction meetings before the start of any particular activity.
• Reading and applying charts and drawings.
• Calculating concrete quantities and coordinating with the supplier plants.
• Resolving any unexpected technical difficulties and other problems that may arise.

From Feb 2013 to Sept 2014
 Worked as a Site Inspector in Atiq Associates Private Limited.
Company Name: -Atiq Associates.
Project Name: - IMAX CineStar Cinema, TownShip, Lahore, Pakistan
Project Description: - The project consisted of construction Different buildings of the new Cinestar Cinema.
Responsibilities: -
• While working as a Site Inspector, my responsibilities were to supervise the construction at the site
• To make sure the quality of the work as per drawings and specifications
• To prepare the bar bending schedule
• To ensure the quality of the rebar work of the slabs, beams, Columns and foundations
• To ensure the finish quality of the precast units
• To ensure the finished quality of the interior of the building
• To coordinate with the consultant staff for the inspection and quality purpose.
• Reading and applying charts and drawings.
• Distribute the work for the foreman’s to reach the planed progress.
• Calculating concrete quantities and supervising the concrete pouring on site

:•While working as a Site Inspector, my responsibilities were to supervise the construction at the
site
•To make sure the quality of the work as per drawings and specifications
•To prepare the bar bending schedule
•To ensure the quality of the rebar work of the slabs, beams, Columns and foundations
•To ensure the finish quality of the precast units
•To ensure the finished quality of the interior of the building
•To coordinate with the consultant staff for the inspection and quality purpose.
•Reading and applying charts and drawings.
•Distribute the work for the foreman’s to reach the planed progress.
Calculating concrete quantities and supervising the concrete pouring on site
•Responsible managing all type of inspections and also coordinate with client and contractor as Per
Drawing.
•Inspection of construction work regularly to ensure that the contractor follows the contract and the
building codes and the work is done accordingly
•Execution of work in accordance with Architectural, Structural, Electrical, Plumbing,
•Inspections of Rebar’s prior to concrete pouring
•Reviewing the various drawings of the contractor and taking photographs of the actual site
•Preparing Shop Drawings of Distributaries & Minors Cross Sections.
•Visiting regularly to site to ensure that the work is progressing according to the plan.
•Coordination with the contractor to resolve any problems
•Preparation of Bar Bending Schedules.
•Preparation of Rate analysis.
•Preparation / Calculation of Bill of Quantities of road and Building projects.
•Verification of Interim Payment Certificate of Contractors.
•Making of B.O.Qs and Engineer Estimates
•Billing (Running /Final Bill)
•Execution of civil wor