عمر خطاب

• Prepare applicable HSE reports as necessary.
• Provide assistance and advice on HSE issues to make recommendations to facility management.
• Participate in detailed incident investigations and Root Cause Analysis.
• Promote incident prevention for the benefit of employees and visitors.
• Observe HSE regulations, wears all required safety equipment, encourages safe working
practices, corrects obvious hazards immediately or reports them to the proper personnel.
• Over viewing the annual maintenance and facilitating employees to work safely by Conducting
TBTs.
• Review Organization and employee safety performance periodically and provide feedback.
• Conduct and document Safety meetings.
• Responsible for monitoring and assessing hazardous and unsafe situations.
• Presentations on H2S safety & induction trainings to the new workers insuring all are aware of
the major hazards of the worksite.
• Basic training to the HSE staff with collaboration of clients representative.
• Planning of the activities to make them safe and risk assessments of all major operations.
• Supervision of housekeeping and environment clean-up activities.
• Reporting of emergency situation on site and conduct investigation.
• Ensure that safety equipment is adequate for workers on site.
• Routine inspections and monitoring of the processes to insure safety
• Investigate and report all serious/critical personal injury accidents.
• Daily site walk-through i.e. observing unsafe acts and conditions.
• Establish emergency procedures and evacuation plans, assist in implementation. Conduct inspection and tours regularly to maintain facilitie

• Implement and monitor the project HSE Management System in accordance with company and client requirements.
• Conduct daily site inspections to identify hazards and ensure compliance with HSE policies and procedures.
• Review and approve Risk Assessments (HIRA/JSA) and Permit to Work (PTW) for high-risk activities.
• Deliver HSE inductions, toolbox talks, and safety awareness training to employees and subcontractors.
• Investigate incidents, near misses, and unsafe conditions, and recommend corrective and preventive actions.
• Monitor work at height, lifting operations, excavation, electrical activities, and confined space work to ensure safe
execution.
• Coordinate with client representatives and project teams to maintain compliance with project safety standards and achieve
HSE objectives.
Key

• Responsible for monitoring and assessing hazardous and unsafe situations.
• Presentations on H2S safety & induction trainings to the new workers insuring all are aware of
the major hazards of the worksite.
• Basic training to the HSE staff with collaboration of clients representative.
• Planning of the activities to make them safe and risk assessments of all major operations.
• Supervision of housekeeping and environment clean-up activities.
• Ensure that TBT before every job is conducted and workers are wearing PPEs.
• Carry out periodic monitoring and reviews of work systems to ensure safe systems of work.
• Attend safety meetings and discuss key HSE issues as appropriate.
• Organizing of meetings for hazard identification, prevention and control.
• Keeping record of the accident incident records and review of the controls to be taken.
• Reporting of emergency situation on site and conduct investigation.
• Ensure that safety equipment is adequate for workers on site.
• Routine inspections and monitoring of the processes to insure safety
• Effective Implementation of Health & Safety Policy of the Company at Workplace.
• Hazard identification and risk assessment for the site hazards (electrical, mechanical, civil and
chemical), unsafe working conditions and initiate corrective actions and control measures.
• Conducts daily checks/audits of permit to work.
• Ensuring that potential safety issues related to the project operator, the environment, the
process and the product are considered at all stages.
• Working closely with Process chemists and control engineers to ensure the process plant is set
up to provide maximum output levels and efficient running of the production facility

• Responsible for monitoring and assessing hazardous and unsafe situations.
• Presentations on H2S safety & induction trainings to the new workers insuring all are aware
of the major hazards of the worksite.
• Basic training to the HSE staff with collaboration of clients representative.
• Planning of the activities to make them safe and risk assessments of all major operations.
• Supervision of housekeeping and environment clean-up activities.
• Ensure that TBT before every job is conducted and workers are wearing PPEs.
• Carry out periodic monitoring and reviews of work systems to ensure safe systems of work.
• Attend safety meetings and discuss key HSE issues as appropriate.
• Organizing of meetings for hazard identification, prevention and control.
• Keeping record of the accident incident records and review of the controls to be taken.
• Reporting of emergency situation on site and conduct investigation.
• Ensure that safety equipment is adequate for workers on site.
• Routine inspections and monitoring of the processes to insure safety
• Effective Implementation of Health & Safety Policy of the Company at Workplace.
• Hazard identification and risk assessment for the site hazards (electrical, mechanical, civil and
chemical), unsafe working conditions and initiate corrective actions and control measures.
• Conducts daily checks/audits of permit to work.
• Ensuring that potential safety issues related to the project operator, the environment, the
process and the product are considered at all stages.
• Working closely with Process chemists and control engineers to ensure the process plant is set
up to provide maximum output levels and efficient running of the production facility

• Walk the manufacturing floor on a regular basis to establish HSE presence and provide support.
• Conduct daily and monthly HSE Meetings/Trainings and schedule as needed.
• Write, manage and implement HSE programs, policies and procedures.
• Evaluating PPE and ensure proper use and maintenance of PPE.s
• Follow Fall Protection program, inspect all fall protection equipment and maintain inspection
records.
• Assist in administering and maintaining compliance programs such as LOTO, Hazard
Communication, Emergency Action Plan and Respiratory Protection etc.
• Maintain relevant HSE logs and documentation and ensure effective communication of HSE

• Ensure that all work is carried out in accordance with the Safety & Loss prevention Program.
• Ensure that all accidents and incidents are properly investigated, and action taken at sites.
• Prepare applicable HSE reports as necessary.
• Provide assistance and advice on HSE issues to make recommendations to facility management.
• Participate in detailed incident investigations and Root Cause Analysis.
• Promote incident prevention for the benefit of employees and visitors.
• Observe HSE regulations, wears all required safety equipment, encourages safe working
practices, corrects obvious hazards immediately or reports them to the proper personnel.
• Over viewing the annual maintenance and facilitating employees to work safely by Conducting
TBTs.
• Maintain positive and proactive relations with managers and employees, as well as our
customers and regulatory agencies.
• Perform additional duties as assigned by Plant manager.

• Monitored daily construction activities to ensure compliance with HSE standards and project requirements.
• Conducted routine site inspections and safety audits to identify and eliminate workplace hazards.
• Reviewed Permit to Work (PTW), Job Safety Analysis (JSA), and Risk Assessments before high-risk activities.
• Delivered safety inductions, toolbox talks, and awareness training for employees and subcontractors.
• Monitored lifting operations, scaffolding, excavation, confined space entry, and work at height activities.
• Investigated incidents and near misses and implemented corrective and preventive actions.

• Attend all troubleshooting & shut down problems and solve with the help of
senior engineers. Maintain data records and reports as needed on timely basis.
• Has been a part of internal auditing team as a technical assistant.
• Perform additional duties as assigned by Plant manager.
• Smooth operation of plant, charging, discharging.
• Inspection and maintenance of instruments and equipments.
• Safety Inspection/auditing & Training for personnel Recording and display of safety reports
and statistics.
• Risk Assessment of lifting operations, fork lift operations tools and equipments.
• Supervision of housekeeping and environment clean-up activities.
• Carry out periodic monitoring and reviews of work systems to ensure safe systems of work.
• Attend safety meetings and ready to discuss key HSE issues as appropriate.
• Organizing of meetings for hazard identification, prevention and control.
• Report emergency on site (accident and incident).
• Ensure that safety equipment is adequate for workers on site.
• Prepare daily, weekly and monthly reports.
• Investigate and report all serious/critical personal injury accidents.
• Daily site walk-through i.e. observing unsafe acts and conditions.
• Establish emergency procedures and evacuation plans, assist in implementation.
• Monitor Permit-to-Work and conduct training on PTW systems.

• Attend all troubleshooting & shut down problems and solve with the help of senior engineers.
Maintain data records and reports as needed on timely basis.
• Has been a part of internal auditing team as a technical assistant.
• Perform additional duties as assigned by Plant manager.
• Smooth operation of plant, charging, discharging.
• Inspection and maintenance of instruments and equipments.
• Safety Inspection/auditing & Training for personnel Recording and display of safety reports
and statistics.
• Risk Assessment of lifting operations, fork lift operations tools and equipments.
• Supervision of housekeeping and environment clean-up activities.
• Carry out periodic monitoring and reviews of work systems to ensure safe systems of work.
• Attend safety meetings and ready to discuss key HSE issues as appropriate.
• Organizing of meetings for hazard identification, prevention and control.
• Report emergency on site (accident and incident).
• Ensure that safety equipment is adequate for workers on site.
• Prepare daily, weekly and monthly reports.
• Investigate and report all serious/critical personal injury accidents.
• Daily site walk-through i.e. observing unsafe acts and conditions.
• Establish emergency procedures and evacuation plans, assist in implementation.
• Monitor Permit-to-Work and conduct training on PTW systems. king Salman

• Supervised daily HSE activities and ensured compliance with company and client safety procedures.
• Conducted routine site inspections and monitored Permit to Work (PTW) activities.
• Carried out incident investigations and prepared HSE reports.
• Conducted toolbox talks and safety awareness sessions for the workforce.
• Monitored housekeeping, PPE compliance, and emergency preparedness on site.
• Coordinated with supervisors to implement corrective actions for identified hazards.

• Effective Implementation of Health & Safety Policy of the Company at Workplace.
• Hazard identification and risk assessment for the site hazards (electrical, mechanical, civil and
chemical), unsafe working conditions and initiate corrective actions and control measures.
• Conducts daily checks/audits of permit to work.
• Supervision and monitoring of work at height, excavation, confined space, live electrical
system, scaffolding, welding, cutting, grinding and crane lifting.
• Ensure that all work is carried out in accordance with the Safety & Loss prevention Program.
• Ensure that all accidents and incidents are properly investigated, action taken on site

• Effective Implementation of Health & Safety Policy of the Company at Workplace.
• Hazard identification and risk assessment for the site hazards (electrical, mechanical, civil and
chemical), unsafe working conditions and initiate corrective actions and control measures.
• Conducts daily checks/audits of permit to work.
• Supervision and monitoring of work at height, excavation, confined space, live electrical
system, scaffolding, welding, cutting, grinding and crane lifting.
• Ensure that all work is carried out in accordance with the Safety & Loss prevention Program.
• Ensure that all accidents and incidents are properly investigated, action taken on site

• Supervised HSE activities across fabrication and construction work areas.
• Conducted safety inspections and monitored compliance with company safety procedures.
• Reviewed high-risk work activities including lifting, hot work, confined space entry, and work at height.
• Delivered safety inductions and toolbox talks for employees and contractors.
• Investigated incidents and implemented corrective and preventive actions.
• Maintained HSE records, inspection reports, and safety documentation.
• Supported safe execution of construction activities through effective HSE monitoring.
• Improved safety awareness by conducting regular training and site inspections.

• Studying plant and equipment configuration so that they can be readily adapted to suit the
product range and the process technologies involved, taking environmental and economic
aspects into account.
• Ensuring that potential safety issues related to the project operator, the environment, the
process and the product are considered at all stages.
• Working closely with Process chemists and control engineers to ensure the process plant is set
up to provide maximum output levels and efficient running Education

• Conducted daily site inspections to ensure compliance with HSE requirements.
• Monitored work at height, scaffolding, excavation, lifting operations, and housekeeping activities.
• Conducted toolbox talks and safety inductions for site personnel.
• Assisted in hazard identification, risk assessment, and implementation of control measures.
• Investigated incidents and reported unsafe conditions to site management.
• Maintained HSE documentation, inspection records, and safety reports.
Key
• Assisted in maintaining a safe working environment throughout the project.
• Contributed to improving safety awareness through regular inspections and employee engagement.