Commissioning & Operations Engineer
SIDEM Veolia
Total des années d'expérience :5 years, 8 Mois
SIDEM is a Veolia Water Technologies business unit dedicated to large desalination projects, providing expert services in design, engineering, procurement, construction, commissioning, operation and maintenance.
Key Contributions:
• Responsible for pre-commissioning and commissioning activities of complete TOP assigned by manager.
• Liaise and assist vendors in commissioning and troubleshooting of equipment on site.
• Managed daily site operations and lead a team of process operators.
• Monitor plant operations during reliability and performance test from CCR.
• Prepared and delivered process training material and organize vendor training at site for the client.
• Supervise membrane loading, conductivity profiling, shimming and probing of membrane elements.
• Interpret membrane performance and perform desired chemical cleaning when required.
• Hands-on experience on commissioning and startup of DAF, DMGF, CF, RO, LSF, CO2, ClO2, CEDI, Chemical Dosing System and Sludge Thickeners.
SEPCO III is the subsidiary of Power China contracted for the EPC and Commissioning of 9-10.5 MIGD capacity of Sea Water Reverse Osmosis project with Continuous Electro Deionization System for Jebel Ali Aluminium Smelter.
Key Contributions:
Assist commissioning team with process commissioning, start up and process optimization.
Liaise and interact with project contractors and vendors for system installation.
Report to manager about schedule and progress related to commissioning activities.
Implementation of client’s guidelines for process and commissioning.
Perform system walk downs with client’s and punch list clearance for associated systems as per requirement.
Review commissioning procedure and support with any technical support to the project on commissioning, troubleshooting and operating procedures.
Deliver technical training to client’s operations team regarding process system.
Participation in weekly project/commissioning update meetings.
Performs other tasks as required in support of project or as per client’s goals and objectives.
A subsidiary of Power China responsible for power generation at Ras Al-Khair Power and Desalination Plant (world's largest hybrid water desalination plant under the ownership of SWCC), which is combined cycle power plant with the production capacity of 2660 MW in Ras Al-Khair.
Key Contributions:
Operating ten HRSGs boiler sampling system and their instrument meters.
Monitoring the quality of circulating water system and boiler's steam as per design requirement and parameters of HRSG boiler, closed cooling water and steam turbines.
Operating and controlling the operation of demineralization plant and its mixed bed ion exchanger regeneration process.
Adjust and monitor the chemical dosing system (pre-treatment, corrosion inhibition, oxygen scavenging and anti-scalant) in the HRSG and CCW water as per required standards.
Controlling the parameters of chemical, oily and sewage wastewater treatment plants.
Analyze the cations, anions and other element composition in water using Ion Analyzer, Gas Chromatography, GC-MS and Atomic Absorption Spectroscopy and Total Organic Carbon instruments.
Handle work permits, perform isolation/deisolation of valves and assist the maintenance team in the work.
Supervised the daily analyses of HRSG, cooling system and evaporator cooler water and record the chemical usage, inventories, glassware, etc. in the lab information management system (LIMS).
Interpret test results, document technical reports and made recommendations related to chemical treatment and operational control of circulating water systems and report to the operations manager.
Assist the operations team on plant processes and performance to achieve maximum yield.
Maintain and responsible for the yearly third-party calibration of lab instrument as per IMC requirements.
Analyses of gas and steam turbine's control, lube and transformer oil in the oil lab to ensure that equipment is running under safe and efficient working condition.
Analyses the chemical, oily, sewage and rain water in the bacterial lab to ensure that the disposed water meets the specified standards of regulatory pertaining to environmental compliance.
Participate in the development and training of local Saudi operators related to plant processes and equipment.
The only producer of polystyrene raw material in Pakistan with the production capacity of 100, 000 metric tons per annum. The manufacturing facility located in Karachi with three production units of crystal, high impact and expandable polystyrene exported to worldwide.
Key Contributions:
Responsible for the operation of the overall manufacturing process of High Impact and Crystal Polystyrene by controlling the various process parameters through PLC based panels.
Monitors process conditions and makes necessary adjustments to optimize the process while ensuring products are within the required specifications according to the grade.
Prepare daily operation logs and reports for the production and consumption of additives and raw materials.
Actively participate in the start-up and shutdown activities of the plant with the team coordination.
Ensure various equipment’s pressure testing, handling condensers and cooling tower parameters and troubleshooting plant operational problems safely.
Carried process development and generation of improvement ideas for optimization of process parameters.
Hands on experience in operating plug flow reactors, CSTRs, mixing tank, batch mixers, centrifugal and gear pumps, steam boilers, vacuum system, extrusion dies, water baths, air dryers, pelletizer, lubricators and storage silos.
Liaison with maintenance, electrical, packaging, testing and utility departments for the smooth operation of the plant.
Guidance and training for the local process operators and technicians on process and plant operations.
Ensure mechanical reliability and environment friendly operation of the plant and equipment.
As Pakistan’s biggest oil refinery with oil refining complex I and II with the combined production capacity of 155, 000 barrels per day.
Get hands-on training in crude oil distillation unit (CDU), naphtha hydrotreating unit (NHU), catalytic reforming unit (CCR) and merox process unit (LSU).
Engaged in an overall overview, working mechanism and operating conditions of the entire ORC-I plant.
Gained knowledge in health safety and environment department, laboratory testing, operations department, DCS room controlling, power generation, oil movement and sales logistics department.
As Pakistan’s leading gas utility company which delivers natural gas from the wellheads to its distribution points and then distribute to its industrial, commercial and domestic customers in southern Pakistan.
Get hands-on training in the process of sales meter station (SMS) plant of Karachi and engaged in the overall input/output of gas distribution network with the help of SCADA controlling system department.
Worked with the gas measurement and quality department, which involves the study of different types of meters and analysis of gas quality by using chromatography techniques.
Visited the coat and wrap site to gain knowledge regarding the coating process.
Designed the overall process flow diagram of sales meter station (SMS) of Karachi terminal using the Microsoft visio professional software.
I received training at Archroma Scientific Centre, Karachi. During training I gained hands-on training on "Chemical Wet Processing" and perform experiments in the following:
Application of Sizing agent on 100% Cotton Yarn.
Pre-Treatment of 100% Cotton Fabric by Exhaust, Semi-Continuous & Continuous Process.
Pre-Treatment of 100% Polyester & Polyester/Cotton (P/C) Blend Fabric by Exhaust Process.
Dyeing of 100% Cotton Yarn & Fabric with Direct, Reactive & Sulfur Dyes by Exhaust Process.
Dyeing of P/C Blend Fabric with Disperse, Direct & Reactive Dyes by Exhaust Process.
Dyeing of 100% Cotton Fabric with Reactive & Sulfur Dyes by Pad-Batch & Continuous Process.
Dyeing of 100% Wool Yarn by Exhaust Process.
Printing of 100% Cotton Fabric with Reactive Dyes.
Pigment Printing on 100% Cotton Fabric.
Printing on 100% Polyester Fabric with Disperse Dyes.
Printing of P/C Blend Fabric with Disperse/Reactive Dyes.
Discharge Printing on 100% Cotton Fabric with Reactive Dyes.
Color Fastness Tests by ISO Methods.
Application of Finishes on 100% Cotton Fabrics by Exhaust & Continuous Process.
Coating on 100% Cotton Denim Fabric with Different Polymers & Sulfur Dyes.
PCSIR stands for Pakistan Council for Scientific Industrial Research. During this two weeks training, I worked on different manufacturing process and prepared individual and overall process & cost estimation report (using Aspen Hysys) on Tenekil (Agro-Chemical) Production Plant and Fish Protein Concentration Plant (FPCP).
I have graduated as a Chemical Engineer from the Dawood University of Engineering and Technology, with the CGPA of 3.4 out of 4.0 in the year 2016. I have advanced knowledge in Heat and Mass Transfer Operations, Thermodynamics, Chemical Process Technology and Petroleum Refinery Engineering. I have an excellent command of Microsoft Office 365, Microsoft Visio Professional, AutoCAD and Aspen Hysys software. Furthermore, I have an excellent communication and interpersonal skills, with ability to liaise effectively and professionally with individuals at all levels. My greatest assets are my ability to work and adapt quickly to different engineering situations. I am passionate to learn and explore new horizons in my career by following positive attitude towards organizational sucess.
Le lien a été supprimé pour non-respect des conditions d'utilisation. Veuillez contacter l’équipe d'assistance pour plus d'informations.