Project Manager - Multi-Discipline (Onshore/Offshore)
C AMERON P ROCESS &C OMPRESSION SYSTEMS
Total years of experience :17 years, 4 Months
Sept '19, 2006 -Present
Company: C AMERON P ROCESS &C OMPRESSION SYSTEMS
P.0. Box 47280, Abu Dhabi, U.A.E,
Tel.No.+97125968400
Project Manager - Multi-Discipline (Onshore/Offshore)
Scope of work involved in Process & Compression Systems for Oil & Gas.
Office:
Manage the Project (Capital & Aftermarket Job)
Assist Proposal Team on Proposal Stage
Prepare all Standard Documents(Optimus) in Preparation of Starting a Project
Review P.O, work scope, Technical Queries, Kick Off Meeting
Coordinate with Different Discipline in Preparation of Various Design Requirements \{Process, Mechanical, Structural, Electrical & Instrumentation\}
Meeting with the Client & Vendors; Coordinate with the various vendors for quotations, Inquire & Chase Vendors/Supplier for all required Equipment, Instruments
Prepares P.O & All related documents for Projects Manager Approval.
Communications with the Client, Vendors, Sub vendors, Logistics, Inspections & Coordination. Delivered the package on time & achieved 100% revenue
Driving & Leading the Engineering Team
Check & Review Design Calculations, Design Drawings as per Client Requirements, Design & Standards.
Check all Documents before Submission.
Make Recommendations for Revisions, Modifications and other changes to the plan
Check all Fabrication drawings, P&ID, Isometrics & GA drawings.
Prepares Material Take Off in Coordination with the Purchasing Department.
Check the Whole Project before Construction/Fabrication, Erection & Commissioning.
Develop PFD, P&ID & Instrument hook-up drawings as per Process Design & Standards.(If required)
Prepare Details of All Types of Mechanical, Structural, Electrical & Instrumentation Design(As built).(If required)
Site:
Handle Multi-Million Dollar Projects from Approval to Final Installation/Erection, Maintenance & Commissioning.
Inspecting & Receiving all Ordered Materials, Equipments, Instrument’s as per Purchased Order & Specs before Dispatching to Site for Erection & Installation.
Install all Mechanical, Structural, Electrical & All Instruments at Site.
Inspecting, Witnessing & Approving all NDT Testing
Supervise the Construction, Fabrication, & Erection of Steel with the Emphasis on Compliance with the Requirements as to Design, Plan and Specification of the Project.
Install All Types of Static & Rotating Equipments
Lead the Inspection & Testing with Various Inspectors & Clients. Inspection such as Loop/P&ID checking, Leak Testing / Hydrotest, Pneumatic Testing, Listing & Closing of Punch List, Alignment of Static/Rotating Equipments
Monitor Work Progress & Coordinate with Different Department for the Completion of the Project.
Organize & Attend meeting with Client, Contractors, Inspectors & other department to review the progress & Resolve Outstanding Issues.
Submit Periodic Report and Communication to the General/Projects Manager regarding the project status
Get the Completion Report (Inspection Release Note)
T.) Saudi Aramco SHGOSP-5 Desalter/Dehydrator \{March 22-25, 2014\} Inspection, Verification & As Builting
U.) Total ABK Offshore
Jan 2005 -Aug '19, 2006
Company: PEL-Pan Emirates Engineering Ltd LLC
P.0. Box 44715, Est No.8550 Abu Dhabi, U.A.E
Position: Mechanical Engineer (Onshore/Offshore)
Projects Involved: Adma- Opco (Abu Dhabi Marine Operating Company)
• Umm Shaif Gas Treatment Plant (Offshore)
Scope of work involved in surveying & as built of Umm Shaif Gas Treatment Plant I-II (Offshore)
• Das Island Zakum & Umm Shaif Separator Area (Onshore)
Scope of work involved in surveying & as built of Zakum & Umm Shaif Separator Area in Das Island (Onshore)
• Zakum West Super Complex (Offshore)
Scope of work involved in surveying & as built of Bridge B4, Bridge B5& Riser Structure of Zakum West Super Complex Offshore.
• Discipline tasks undertaken include leading, supervising offshore/onshore activities, preparation of site sketches of piping isometrics, structural
sketches, ensure safety of the group, coordinate with other contractor disciplines, assign drafting personnel in preparation of required drawing & sketches, prepares piping isometrics, piping G.A, equipment lay out as per site mark ups, detailing, checking of piping general arrangements against classes & piping material take-off. Prepares Riser Structure General Arrangement including plan layout, jacket connections & details from boat fender +5.40M up to El. +35M (top) . Also prepares plan, elevation & details for all bridle platforms, cross over, valve pits, pipe racks & its
support.
Zadco (Zakum Development Company)
Central Complex (Offshore)
Scope of work involved Engineering, Design of Welding Workshop.
• Discipline tasks undertaken included site survey, coordinate with the client for project development & proposals, preparation of design layout,
preparation of positioning of structure on vessel & installation procedure, 3d drawing for general arrangement of structural & architectural, detailing
fabrication drawings & material take-off.
Oct' 2004 -Dec2004
Company: Adyard
Mussafa
Position: QuantitySurveyor (Onshore/Offshore)
• Scope of work involved in preparation of material take off of API 650 tanks & Pressure Vessels, Rig piping for Iran project & Structural Pipe racks
Aug '02-Aug '03
Company: Denolex Polymers
P.0. Box 1406, Sharjah, United Arab Emirates
3
P.O. Box 47280 Abu Dhabi, UAE
Mobile No.: UAE: +971503246108; Phils.:+639277400126/+639269525390;
Email: wilsonygarcia@yahoo.com
Position: Staff Engineer
• Scope of work involved interior design of acrylic tops & structural framing & supports.
• Discipline tasks undertaken included designing & supervising, take care of all site measurements, prepare quotations as per company guidelines and standards, prepare design drawing using AutoCAD R2000-R2004, in 3D & 2D modeling, detailing and take off its bill of materials, detail interior as well as structural design for fabrication, supervise the fabrication as well as site fixing, inspect work site as well as the fabrication shop to see to it
that the job is in accordance with the design drawing and as per client requirements, make recommendation for revision, modification or any
changes to the project, assists Salesman to deal with the client with regards to projects for approval, coordinate with the customer/client regarding project design recommendation, suggestions as well as project status and scheduling.
Jan '01-July '02
Company: Self Employed, Manila, Philippines
Position: Mechanical Engineer
• Scope of work involved contracting drawings for oil & gas piping isometric drawings, Structural Platform as well as interior drawings.
• Discipline tasks undertaken included drafting drawings; prepare details of all types of mechanical, structural & interior design. Make
recommendations for revisions, modification and other changes to the plan. Check and revise drawings before submission. Design drawings using
AutoCAD R2000 in 3D/2D modeling, detailing & material listing based on the final take off.
July '97-July '99
Company: AL-Zamil HeavyIndustries Ltd.
P.O. Box 13169 Jeddah 21493, K.S.A., Tel. # (966 2) 699 2411
Position: Mechanical Engineer (Onshore/Offshore)
• Scope of work Engaged in Heavy Steel Fabrication for Petrochemicals & Oil & Gas.
• Discipline tasks undertaken included survey work and inspect the work site as well as the fabrication shop to see to it that the work is in accordance with the design drawing and as per clients requirements,
• Supervise the construction, fabrication, and erection steel with the emphasis on compliance with the requirements as to design, plan and specification of the projects.
• Submit periodic report and communication to the project manager regarding the project status.
• Prepare details of all types of structural, mechanical & electrical design.
• Assigned drafting personnel in the preparation of all required drawings and sketches.
• Make recommendations for revisions, modification and other changes to the plan.
• Check and revise drawings before submission.
• Review / checks design calculations and construction drawings.
• Design drawings using AutoCAD in 3D/2D modeling, detailing & material listing system based on final information and passed onto the Engineering
Manager for final approval.
• Prepares material take off. Coordinate with the purchasing department.
• Export detailed bill of materials to Fabtrol (software that sum ups the needed quantity of materials)
Jan '96-July '97
Company: CEMACement Management Corporation
Km. 14 South Superhighway Paranaque, Metro Manila, Philippines
Position: Mechanical Design Engineer
• Scope of work involved Engineering design, procurement, fabrication, construction & erection.
• Discipline tasks undertaken included participate in the planning system with the supervisor & co-personnel
• Submit working design computation, drawings & quotations as per company policy & guidelines.
• Modify & improve existing drawing layout in relation to the proposed project.
• Conduct plant inspections for the project development & commissioning.
• Prepare design lay-outs
• Detailed plan drawings for machinery's and equipment assembly.
• Detailed mechanical & structural drawings for fabrication.
• Calculate & estimate the cost of the materials needed for the particular project.
• Coordinate with the purchasing department in accordance with the material specs & design requirements.
July '94-Dec '95
Company: P ILIPINAS M AINTENANCE S ERVICES C ORPORATION (Hino)
Cainta, Rizal Philippines
Position: Staff Engineer
• Scope of work involved Engineering design, procurement, & fabrication.
• Discipline tasks undertaken included preparing detailed bill of materials and cost estimate to quote bids of the company.
• Calculate man-hour and cost estimates for design/repair.
• Coordinate with the contractor by preparing & monitoring materials, manpower and equipment schedule.
• Monitoring activities, review plans detailed drawings and coordinate prior for construction.
4
P.O. Box 47280 Abu Dhabi, UAE
Mobile No.: UAE: +971503246108; Phils.:+639277400126/+639269525390;
Email: wilsonygarcia@yahoo.com
Position: Project Manager - Multi-Discipline (Onshore/Offshore)
Scope of work involved in Process & Compression Systems for Oil & Gas.
Office: • Manage the Project (Capital & Aftermarket Job)
• Helped Proposal Team on Proposal Stage
• Prepare all Standard Documents (Optimus) in Preparation of Starting a Project
• Review P.O, work scope, Technical Queries, Kick Off Meeting
• Coordinate with Different Discipline in Preparation of Various Design Requirements \{Process, Mechanical, Structural, Electrical & Instrumentation\}
• Meeting with the Client & Vendors; Coordinate with the various vendors for quotations, Inquire & Chase Vendors/Supplier for all required
Equipment, Instruments
• Prepares P.O & All related documents for Projects Manager Approval.
• Communications with the Client, Vendors, Sub vendors, Logistics, Inspections & Coordination. Delivered the package on time & achieved
100% revenue
• Driving & Leading the Engineering Team
• Check & Review Design Calculations, Design Drawings as per Client Requirements, Design & Standards.
• Check all Documents before Submission.
• Make Recommendations for Revisions, Modifications and other changes to the plan
• Check all Fabrication drawings, P&ID, Isometrics & GA drawings.
• Prepares Material Take Off in Coordination with the Purchasing Department.
• Check the Whole Project before Construction/Fabrication, Erection & Commissioning.
• Develop PFD, P&ID & Instrument hook-up drawings as per Process Design & Standards. (If required)
• Prepare Details of All Types of Mechanical, Structural, Electrical & Instrumentation Design (As built) . (If required)
Site: • Handle Multi-Million Dollar Projects from Approval to Final Installation/Erection, Maintenance & Commissioning.
• Inspecting & Receiving all Ordered Materials, Equipments, Instrument's as per Purchased Order & Specs before Dispatching to Site for
Erection & Installation.
• Install all Mechanical, Structural, Electrical & All Instruments at Site.
• Inspecting, Witnessing & Approving all NDT Testing
• Supervise the Construction, Fabrication, & Erection of Steel with the Emphasis on Compliance with the Requirements as to Design, Plan and
Specification of the Project.
• Install All Types of Static & Rotating Equipments
2
P.O. Box 47280 Abu Dhabi, UAE
Mobile No.: UAE: +971503246108; Phils.:+639277400126/+639269525390;
Email: wilsonygarcia@yahoo.com
• Lead the Inspection & Testing with Various Inspectors & Clients. Inspection such as Loop/P&ID checking, Leak Testing / Hydrotest, Pneumatic
Testing, Listing & Closing of Punch List, Alignment of Static/Rotating Equipments
• Monitor Work Progress & Coordinate with Different Department for the Completion of the Project.
• Organize & Attend meeting with Client, Contractors, Inspectors & other department to review the progress & Resolve Outstanding Issues.
• Submit Periodic Report and Communication to the General/Projects Manager regarding the project status
• Get the Completion Report (Inspection Release Note)
P ROJECTS I NVOLVED: A.) 13297: FUEL GAS PACKAGE FOR HABSHAN PROJECT, UAE
B.) 13861: HEATERS A&B FOR RAS LAFFAN PROJECT, QATAR
C.) 13649: HDBF (3NOS) & IGF (6NOS) PDO, MARMUL POLYMER PROJECT OMAN
D.) 14238: DEPURATORS MODEL 12-4C (4NOS) CAIRN ENERGY, INDIA
E.) 15089: SANDWASH PACKAGE CAIRN ENERGY, INDIA
F.) 15332: WEMCO DEPURATOR MODEL 120X 1+1, KOC KUWAIT
G.) 15280: BAPCO GDU'S, BAHRAIN
H.) 11954: FUEL GAS VASAI EAST MUMBAI HEIGHTS OFFSHORE, INDIA
I.) 15511: PETROFAC GDU, ASAB FFD PROJECT, UAE
J.) 15438: NUTSHELL FILTER DALEEL, OMAN
K.) BS 160 Cam-UK PROJECT: GDU (2Units-GAS DEHYDRATION UNIT) KOC KUWAIT
L.) 20373: NOCL DESALTER HEADER, RISER & MUDWASH PIPING - NAGARJUNA CDU INDIA
M.) 21207: KJO HEATER AL-KHAFJI, SAUDI ARABIA
N.) 22590: ESSAR DESALTER VESSEL PACKAGE, MUMBAI INDIA
O.) R-AA0009 (Cam-Singapore Proj) - 4Units INDUCED STATIC FLOATATION SYSTEMS, OXY - MUKHAIZNA, OMAN
P.) 19067: Water Treatment Facilities (Catridge Filter/Induced Gas Floatation/Nut Shell Filter Packages) - PWT Al Khafji, KGOC-AGOC, KSA
Q.) 24772: Trivolt Two Stage Dehydrator / Desalter - BP, IRAQ N.V.
R.) 25522: Trivolt Two Stage Dehydrator / Desalter - ExxonMobil, WQ1 Basra Iraq.
S.) S.O.2656365 Design, Manufacture & Supply of Inlet Device for LTX SEPARATOR - Al Balagh \{QP, Qatar\}
• Mapua Institute of Technology, Manila, Philippines Graduated Bachelor of Science in Mechanical Engineering (1994) Summaryof Experience: Total of 17 years Experience in Project Management, Projects, Engineering Design, Detailing, Estimating, Fabrication, Supervision, Construction, Installation, Erection, Maintenance, Commissioning and Related Project Documentation in the Oil & Gas (Onshore/Offshore), Petrochemicals/Industrial Projects. Experience involves 13 years in Oil & Gas Projects, Project Management, Design, Fabrication, Installation/Erection, Repair/Maintenance & Commissioning, 2 years in Cement Industries Design, Fabrication and Installation/Erection & Commissioning, 1year Motor pool (Bus, Truck, Van) Design, Fabrication & Supervision, 1 year in Interior and Structural Design, Fabrication & Installation.
College/University 1988-1994 Mapua Institute of Technology Bachelor of Science in Mechanical Engineering (BSME)
High School 1984-1988 Mapua Institute of Technology - Graduated
Elementary 1978-1984 Puerto Galera Central School - Graduated Trainings & Seminars: Water & Waste Treatment - Sponsored by: Salcon Industries Incorporated Philippines Heat Treatment, Instrumentation, Welding - Sponsored by: Metal Industries Research & Devt. Corp. Philippines Industrial Maintenance Safety - Sponsored by: Tel-A-Train Phils. Drilling Equipment - Sponsored by: Philippine National Oil Company AutoCAD - Sponsored by: Cement Management Corporation