Instrumentation Engineer
Delta Gulf Industrial Services
Total years of experience :16 years, 0 Months
Total years of experience: 12+ years
Ras Tanura Clean Fuel Project
Responsibilities:
•Assigned as a Instrument resident engineer for the process control system which includes DCS, ESD and MPS systems at Honeywell Turki Arabia (DTV) for Ras Tanura Clean Fuel Project witnessed PRE-FAT, FAT, IFAT for the process Control Systems.
•Verification of Control Narrative as per the process design.
•Verification of Cause and Effect matrix and logic Test.
•Witnessed inspected the following activities, system readyness review, Visual Inspection, Electriacal Power Connection, wiring check, DCS system, Hardware Functionality check, DCS configuration, Loop and spare check.
•Historian and Report check, Graphics dynamics and Navigation check, Failure mode & Diagnostics check, Foundation field bus functional checks, Network Configuration & Time Synchronization test, Hardware functionality checks, System management and workstation verification, FAT and IFAT completion record And Packing inspection.
Other PCS (DCS, ESD, PLC, VMS, MPS ) Projects.
1. Vendor : Yokogawa Middle East and Africa B.S.C ©
Client : Tecnicas Reunidas
Project : Fadhili Gas plant
2. Vendor : SKF
•Project : SAMAC (SABIC)
Responsibilities:
•Reporting to field engineering manager for field routine matters.
•Performing Local and Remote loop checking.
•Performing functional test activities.
•Involved in Commissioning of sub system and systems areas
•Reviewing engineering documents for approval
•Review and monitor contractor daily Work Activity.
•Responsible for overseing SAT for bagging machine, Pestalation machine.
•Responsible for SAT activity for Waste Water Treatment unit.
•Review P & ID and logic diagrams, loop diagrams.
•Verification of instruments and valves, the way which mounted on pipe as per P&ID flow direction, proper process connection etc.
•Verification of Installation of PA/GA System as per drawing.
•Verification of Installation of Security Cameras as per drawings.
•Monitored commissioning activities and managed a team.
•PRP portal Q Round leader for Instrumentation.
•Monitoring the the walkthrough activities.
•Perform Local and Remote loop checking & Functional test activity.
•Responsible for the inspection of installation of instruments, Conduits and fittings (above and below ground), Cable trays/ladder racks and Cables, Junction Boxes, Control Panels, Consoles, wiring termination, impulse tubing as per the project specification.
•Overseeing installation activity before commissioning for operational use.
•Supervising and testing the installation, pre-commissioning and commissioning activities on the field.
•Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.
•Preparation of daily activity report.
•Provided necessary support for commissioning activities.
•Profound knowledge of instrumentation contractor’s detail design, procurement, fabrication and installation
Wire & Cable Compounding Project
Responsibilities:
•Reporting to field engineering manager for field routine matters.
•Monitoring the the walkthrough activities.
•Involved in Local and Remote loop checking.
•Involve in functional test activities.
•Involved in the commissioning activities of batch process and continuous process.
•Performing the modification of batch recipe as per the Process department request in
YOKOGAWA DCS CS3000.
•Used to modify the alarm priority list
•Modification of the process as per the MOCS request.
•Troubleshooting the error in the ABB PLC
•Worked on Triconex PESS system
•Deep knowledge of instrumentation commissioning procedures and policies.
•Made regular field visits to monitor the installations at site and to review progress and ensure test results.
•Verification installation of PA/GA System as per drawings.
•Verification of installation of security Camers as per drawings.
•Monitored commissioning activities and managed a team of technicians
•Provided necessary support for commissioning activities in operational phase of project.
•Responsible for overseeing installation activity before commissioning for operational use.
•Supervising and testing the installation, pre-commissioning and commissioning activities on the field along with other engineers
•Profound knowledge of instrumentation contractor’s detail design, procurement, fabrication and installation
Responsibilities:
•Prepared Inspection, Test plans and Quality control procedures.
•Involved in inspection of field instrumentation, marshalling racks, control panels and prepared modifications.Supervision and coordination with the senior engineers for inspection of various instruments.
•Inspect all terminations in the Field & control room marshalling cabinets according to the wiring diagrams.
•Involved in technical review of Instrument drawings, process hook-ups, cable routing and Instrument location plans with the senior engineers performed test procedures and prepared daily work plans.
•Made regular field visits to monitor the installations at site and to review progress and ensure test results.
•Checking all the connections & loop check as per the standards.
•Member of a team responsible for calibration activities of field instruments.
•Prepared modifications of PID’s, cable tray routing diagrams, instrument location plans, instrument hook-ups as per site requirments.
•Inspected and witnessed instrument installation activities in the field.
Responsibilities:
•In coordination with the senior engineers performed test procedures and prepared daily work plans for field technicians.
•Responsible for the installation of multi core cables from the control room to the junction box terminations and from the junction boxes to the field instruments
•Inspected and witnessed instrument tubing installation activities on the field
•Responible for instrument cable installation activity in the field
•Handled and prepared a list of all indirect costs that were incurred in the project such as the manpower, temporary facilities and the other running expenses
•Developing the data sheet for electronics and pneumatic instruments.
•Supervices & control the remote instrument building and field construction areas.
•Field visit to collect the instrument reading as and when required.
•Checking and maintenance of instruments and record data.
7. Employer Name : Medha Engineering
Supervision and coordination with the senior engineers for inspection of various instruments.
•In coordination with the senior engineers performed test procedures and prepared daily work plans for field technicians.-
•Made regular field visits to monitor the installations at site and to review progress and ensure test results.
•Responsible for the installation of multi core cables from the control room to the junction box terminations and from the junction boxes to the field instruments.
•Performed all the terminations in the marshalling cabinets according to the panel connection sheets.
•Checking all the connections as per the tagging of the instruments in the panel connection sheets from the junction boxes to the instruments.
•Member of a team responsible for calibration activities of field instruments.
•Member of a team responsible for loop checking from the control room to junction boxes, to the field instruments and back to the control room.
•Involved in technical review of Instrument drawings, process hook-ups, cable routing and Instrument location plans.
•Prepared modifications of PID’s, cable tray routing diagrams, instrument location plans, instrument hook-ups as per site requirments.
•Involved in inspection of field instrumentation, marshalling racks, control panels and prepared modifications.
•Inspected and witnessed instrument installation activities in the field.
Design Exposure:
•Preparation of specification sheets.
•Preparation of As Built Drawing
•Preparation of Instrument hook-ups.
•Preparation of junction box schedules.
•Preparation of Instrument loop diagrams.
•Preparation of Material takeoff list.
APPROVALS: SAUDI ARAMCO Approved Vendor Inspector with SAP No. 80003265