CAM TECHNICIAN
FRANK'S INTERNATIONAL OILFIELD SERVICES Plot
Total des années d'expérience :8 years, 5 Mois
**Company: FRANK'S INTERNATIONAL OILFIELD SERVICES Plot 6 Trans Amadi, Port Harcourt. (November. 2012 - till date)
Position: CAM TECHNICIAN
Responsibility;
❖ Analyze of the torque/turns behavior of a casing or tubing make-up.
❖ Preparation of a synopsis report after every job for further analysis and documentation.
❖ Packing /un-packing, connecting/dis-connecting, inspecting, monitoring, testing and operating all equipments at the job site.
❖ Recommend measures to improve procedures, equipment performance, and quality of service and suggest changes in working conditions and use of equipments to increase efficiency of services or work crew.
❖ Conduct pre-job function checks on the CAM unit and accessories before the operation begins.
❖ Responsible to monitor and take final decisions concerning the correct make-up of the tubular during operations.
❖ Calculate the reference, Minimum and maximum shoulder torque values depending on the pipe type.
❖ Responsible for accepting or rejecting any pipe joint that is being made-up.
❖ Seek ways to eliminate un-safe work practices, conditions, and avoid damage to the equipment
❖ Support the tong operators in installation procedures and rig-up.
❖ Develop and maintain a strong interface with the workforce on the rig site.
❖ To assist in the maintenance of all CAM units and accessories.
❖ Issuing instructive electronic filing, paper file stripping and transfer of records from the interim storage of the paper records, which are to be retained.
** National Youth Service Corps (NYSC) (November 2011-october 2012)
Place of primary assignment: Community comprehensive technical school, Ohuru, Abia State.
Position: Senior secondary science teacher
** Company: REMM Oil Services Ltd., FOT Terminal Onne, Port Harcourt. (June, 2007 - November, 2011)
Position: Production Supervisor
Responsibilities;
❖ Supervised and organized all HSE meetings, both Tool Box meeting and safety meetings.
❖ Plans, directs, and coordinates manufacturing processes in industrial plant: Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.
➢ Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.
➢ Preparation of job cards with detailed drawings and schedule activities to machinists, operators and fabrication gangs to achieve in time.
➢ Train the manpower to operate the critical machines and works.
➢ Preparation of work plans, material plans, machine plans, and scheduling.
❖ Assisting the Operational manager in planning of the required tasks for the staff. Inspection
❖ Support the operators in installation procedures.
❖ Coordinating workshop activities in absence of workshop manager and supervisor.
❖ To assist in the production of progress performance information for inclusion in the weekly and monthly report.
❖ Operation of FANUC and MAZATROL Computer Numerical Control (CNC) System in the production of the following oil tools;
➢ Connections, such as;
* TT 585 * HYDRIL CS * TENARIS BLUE * DAMINE TENARIS
BHI - T2s * XT-Ms, All API connections* VAM Top * New VAM * VAM DPR * VAM FJL * VAM ACE * TENARIS BLUE * TENARIS FJL * DAMINE TENARIS * DINO VAM * XT-Ms * VAM EXPRESS * VAM FH EIS * RTS-8 & RTS-6 * HT 55 & DS 55 * FOX etc
❖ Inspection
Receiving inspection: o Inspect every material received from every customer upon receipt.
o Identified all materials received from a customer with names & dates receipt from the client.
➢ Work - in - process inspection: o Sawing;
* Performed routine check.
o Swaging;
* Inspection of first piece swaged during all swaging process which is recorded on the work order.
o Machining & Threading;
* 100% inspection of the first machined piece and follow - up inspection for the particular order & filled up the inspection report online.
o Surface Treatment;
* Visual inspection of finished phosphate, copper-plating & bead blasting jobs.
* 30X magnification checks on phosphate products.
* Carried out rag test on phosphate materials.
* Surface test on bead blasted products
* Tape test on copper plated
o Make up/assembly process;
* Visual inspection, dimensional checks and drift test.
**Company: AERO CONTRACTORS NIG. LTD, Port Harcourt (OCT 2004 - MAY 2005)
Position: AVIONICS TRAINEE
Responsibilities;
❖ Responsible for taking inventory of all helicopters that needs servicing.
❖ Trouble-shooting of actuators, sensors etc.
**Company: VETCO GRAY Nig. Ltd (JAN. 2002 - JUN.2002)
Position: OFFICE ASSISTANCE
Responsibilities;
❖ Preparing of job requisitions for the vendors.
❖ Taking inventory of all equipments and items delivered from the vendors.
❖ Inspecting of delivered items to ensure it meets specification.
❖ Monitoring of bidding process for jobs being quoted for.
Computer literacy: Skilful in the following packages: MICROSOFT OFFICE & APPLICATIONS
AUTOCAD & APPLICATIONS
INTERNET USES
PRIMAVERA & APPLICATIONS
CAD/CAM using TOPSOLID SOFTWARE
• PDMS & APPLICATIONS
•
COURSE (S) ATTENDED: ❖ Mazatrol and Fanuc programming
❖ Tool handling process
❖ Hazard identification and elimination
❖ Power Tong operation
❖ Connection analyzed make-up (CAM)
❖ Stabbing
❖ Fill-up tool operation and handling
❖ CAD/CAM design using topsolid Vienna, Austria
❖ WFL MILLTURN training Linz, Austria
❖ Internal auditors training
❖ Root cause analysis training
Other Skills
Excellent Driving skill
Excellent planning & organizational skills
Excellent interpersonal skills
Excellent oral &written communication skills
Excellent presentation skills
Excellent negotiation skills
Good numerical skills
Excellent investigative skills
Excellent skill in QHSE.
Safety Courses Attended: ❖ Basic fire fighting Certificate course
❖ Industrial Safety/First Aid Certificate Course
❖ Safety Fire Warden Certificate Course
❖ Basic offshore safety induction and emergency training
❖ Underground helicopter training
University of Port Harcourt 2001-2007
Bachelor of Engineering (Electrical/Electronics Engineering) 2007
Government Secondary School, Elekahia. Port Harcourt. 1992-1998
Federal Government Girls College (staff school) 1987-1992 Qualifications Obtained:
First School Leaving Certificate 1992