Electrical Site And Technical Office Engineer
Saudi Tamas for general contractibg
Total years of experience :7 years, 10 Months
Preparing RFI and RFP for any technical clarifications. 3-Preparing and Reviewing ( SD ) Shop Drawing for power systems and light current systems perior to submit to consultant for approval to be ready for excution in the site . 4-Preparing (MS) Material Submital to be submitted to the consultant for approval . 5-Make quantities take off for all material required for excution according to approved material submital and approved vendor list . 6-Preparing (MIR) Material Inspecttion Requist to be submitted to the consultant for approval . 7-Co-ordination with other trades to start installtion and excution. 8-Co-ordination with Main contractor and Consultant to take the permission to start excution . 9-ensure that all information and needed material and required tools and equipments are available to undertake the works. 10-ensure all material are correctly stored at site and installed without damage 11-Manage and supervises the on all site electrical works. 12-control the quality and tecnical correctness of installation in accordance with the project quality assurance plan. and works are carried out in a safe manner in accordance with the project safty plan . 13-Co-ordinate with main contractor and subcontractor . 14-Allocate the workforce to areas on the site based on the program, nature of the work and skilled required 15-Installation of electrical and telecommunicationsystems: -LIGHTING - POWER - MATV -FIRE ALARM SYSTEM -DATA -TELIPHON -ACCESS CONTROL - SOUND SYSTEM -NURSE CALL -CCTV -INTERCOM 16-Fabrication and installation cable trays and conduits 17-Installation and termination for electrical panels and transformers . 18-Responsible for pulling Cables (MV Cables & LV Cables), Control Cables (Instrument Cables, Thermocouple cables & Fiber optical Cables) . 19-Installation, test and commissioning of all electrical equipment, motors, starters and instrumentation of steam turbine, generator, condenser systems and auxiliariessystems. 20-Preparing (IR) to be submitted for the consultant to implement the inspection and test plan and obtain the consultant approval at each stage of work untill the hand over stage.
21- Preparing the daily, weekly and monthly reports to the project manager and control site team. 22- Preparing invoices and quantity survey 23- Managing testing and commessioning and Report to managers.
PROJECTS TYPES - POWER PLANT. - MALL . -VILLAS. - CHALETS. -MOSQUE. -ADMINISTATION BUILDING -HOSPITAL . -HOTEL. -STADIUM . - BAKERY AND KINDERGARTEN . - Infrastructure Electrical and Telecomunication
Preparing a review for IFC drawing and make sure that its matched with BOQ, Specification and, ID drawing . 2-Review the contractors (SD) shop drawing for approval according to BOQ, IFC drawing, ID drawing and contract items . 3-Review the (MS) material submital for approval according to Specification document .
4- Co-ordination with other trades and preparing clashes to be reported to the BIM Engineer to prepare the solution. 5- (RFI) and (RFP) Requist For Information and Requist For Proposal reply after co-ordination between Specification, Method Of Statement, other trades and Designer Engineer for approval . 6- Control the relationship between site and technical office documentation as (JSI, SWI, NCR, MO and VO). 7- Co-ordination between the OWNER and CONTRACTORS and SUPPLIER according to vendor list . 8- Attend owner official meetings for discuss the project progress according to the project plan at each stage and MOM meeting instructions. 9- Preparing the daily, weekly and monthly reports to the project manager and control site team. 10- Inspection of material at site (MIR) according to material submital which complied with specification and vendor list and ensure all material is following contract documentation and stored according to codes precautions. 11- Inspection of electrical works at site according to (IR) and final approved and co-ordinated drawing . 12- Ensure that all installed material are approved and not damaged . 13- Help the contractor to achieve high quality which matching to specification and monitor the production and quality of contractors works at site and advise with quick solution for clashes at the site according to site conditiotion and technical office and (BIM) Department . PROFISSIONAL EXPERIENCE ** (FROM) NOV-2019 (TO) NOV-2021 ** * Work for Consultant : (SGAC ) ENGINEERING CONSULTATION CENTER DR: SAAD ELGIOUSHY * POSITION : Electrical Site And Technical Office Consultant Engineer. * PROJECT : (DARA) LUXURY HOUSING BUILDING IN ELMYNIA GOVERNORATE * PROJECT OWNER : Ministry Of Housing and Urban Communities. RESPONSIBILITY 1-Preparing a review for IFC drawing and make sure that its matched with BOQ, Specification and, ID drawing . 2-Review the contractors (SD) shop drawing for approval according to BOQ, IFC drawing, ID drawing and contract items . 3-Review the (MS) material submital for approval according to Specification document . 4- Co-ordination with other trades and preparing clashes to be reported to the BIM Engineer to prepare the solution. (RFI) and (RFP) Requist For Information and Requist For Proposal reply after co-ordination between 5- Specification, Method Of Statement, other trades and Designer Engineer for approval . 6- Control the relationship between site and technical office documentation as (JSI, SWI, NCR, MO and VO). 7- 8- Co-ordination between the OWNER and CONTRACTORS and SUPPLIER according to vendor list . 9- Attend owner official meetings for discuss the project progress according to the project plan at each stage and MOM meeting instructions. Preparing the daily, weekly and monthly reports to the project manager and control site team. 10- 11- Inspection of material at site (MIR) according to material submital which complied with specification and vendor list and ensure all material is following contract documentation and stored according to codes precautions. Inspection of electrical works at site according to (IR) and final approved and co-ordinated drawing . 12- Ensure that all installed material are approved and not damaged . 13-Help the contractor to achieve high quality which matching to specification and monitor the production and quality of contractors works at site and advise with quick solution for clashes at the site according to site conditiotion and technical office and (BIM) Department
-Preparing a review for IFC drawing and make sure that its matched with BOQ, Specification and, ID drawing . 2-Review the contractors (SD) shop drawing for approval according to BOQ, IFC drawing, ID drawing and contract items . 3-Review the (MS) material submital for approval according to Specification document .
4- Co-ordination with other trades and preparing clashes to be reported to the BIM Engineer to prepare the solution. 5- (RFI) and (RFP) Requist For Information and Requist For Proposal reply after co-ordination between Specification, Method Of Statement, other trades and Designer Engineer for approval . 6- Control the relationship between site and technical office documentation as (JSI, SWI, NCR, MO and VO). 7- Co-ordination between the OWNER and CONTRACTORS and SUPPLIER according to vendor list . 8- Attend owner official meetings for discuss the project progress according to the project plan at each stage and MOM meeting instructions. 9- Preparing the daily, weekly and monthly reports to the project manager and control site team. 10- Inspection of material at site (MIR) according to material submital which complied with specification and vendor list and ensure all material is following contract documentation and stored according to codes precautions. 11- Inspection of electrical works at site according to (IR) and final approved and co-ordinated drawing . 12- Ensure that all installed material are approved and not damaged . 13- Help the contractor to achieve high quality which matching to specification and monitor the production and quality of contractors works at site and advise with quick solution for clashes at the site according to site conditiotion and technical office and (BIM) Department . PROFISSIONAL EXPERIENCE ** (FROM) NOV-2019 (TO) NOV-2021 ** * Work for Consultant : (SGAC ) ENGINEERING CONSULTATION CENTER DR: SAAD ELGIOUSHY * POSITION : Electrical Site And Technical Office Consultant Engineer. * PROJECT : (DARA) LUXURY HOUSING BUILDING IN ELMYNIA GOVERNORATE * PROJECT OWNER : Ministry Of Housing and Urban Communities. RESPONSIBILITY 1-Preparing a review for IFC drawing and make sure that its matched with BOQ, Specification and, ID drawing . 2-Review the contractors (SD) shop drawing for approval according to BOQ, IFC drawing, ID drawing and contract items . 3-Review the (MS) material submital for approval according to Specification document . 4- Co-ordination with other trades and preparing clashes to be reported to the BIM Engineer to prepare the solution. (RFI) and (RFP) Requist For Information and Requist For Proposal reply after co-ordination between 5- Specification, Method Of Statement, other trades and Designer Engineer for approval . 6- Control the relationship between site and technical office documentation as (JSI, SWI, NCR, MO and VO). 7- 8- Co-ordination between the OWNER and CONTRACTORS and SUPPLIER according to vendor list . 9- Attend owner official meetings for discuss the project progress according to the project plan at each stage and MOM meeting instructions. Preparing the daily, weekly and monthly reports to the project manager and control site team. 10- 11- Inspection of material at site (MIR) according to material submital which complied with specification and vendor list and ensure all material is following contract documentation and stored according to codes precautions. Inspection of electrical works at site according to (IR) and final approved and co-ordinated drawing . 12- Ensure that all installed material are approved and not damaged . 13-Help the contractor to achieve high quality which matching to specification and monitor the production and quality of contractors works at site and advise with quick solution for clashes at the site according to site conditiotion and technical office and (BIM) Department
1-Preparing a review for IFC drawing, BOQ, Specification and Contract documents. 2-Preparing RFI and RFP for any technical clarifications. 3-Preparing and Reviewing ( SD ) Shop Drawing for power systems and light current systems perior to submit to consultant for approval to be ready for excution in the site . 4-Preparing (MS) Material Submital to be submitted to the consultant for approval . 5-Make quantities take off for all material required for excution according to approved material submital and approved vendor list . 6-Preparing (MIR) Material Inspecttion Requist to be submitted to the consultant for approval . 7-Co-ordination with other trades to start installtion and excution. 8-Co-ordination with Main contractor and Consultant to take the permission to start excution . 9-ensure that all information and needed material and required tools and equipments are available to undertake the works. 10-ensure all material are correctly stored at site and installed without damage 11-Manage and supervises the on all site electrical works. 12-control the quality and tecnical correctness of installation in accordance with the project quality assurance plan. and works are carried out in a safe manner in accordance with the project safty plan . 13-Co-ordinate with main contractor and subcontractor . 14-Allocate the workforce to areas on the site based on the program, nature of the work and skilled required 15-Installation of electrical and telecommunicationsystems: -LIGHTING - POWER - MATV -FIRE ALARM SYSTEM -DATA -TELIPHON -ACCESS CONTROL - SOUND SYSTEM -NURSE CALL -CCTV -INTERCOM 16-Fabrication and installation cable trays and conduits 17-Installation and termination for electrical panels and transformers . 18-Responsible for pulling Cables (MV Cables & LV Cables), Control Cables (Instrument Cables, Thermocouple cables & Fiber optical Cables) . 19-Installation, test and commissioning of all electrical equipment, motors, starters and instrumentation of steam turbine, generator, condenser systems and auxiliariessystems. 20-Preparing (IR) to be submitted for the consultant to implement the inspection and test plan and obtain the consultant approval at each stage of work untill the hand over stage.
21- Preparing the daily, weekly and monthly reports to the project manager and control site team. 22- Preparing invoices and quantity survey 23- Managing testing and commessioning and Report to managers.
PROJECTS TYPES - POWER PLANT. - MALL . -VILLAS. - CHALETS. -MOSQUE. -ADMINISTATION BUILDING -HOSPITAL . -HOTEL. -STADIUM . - BAKERY AND KINDERGARTEN . - Infrastructure Electrical and Telecomunication
التقدير العام جيد ٧٤بالماءة وتقدير مشروع التخرج تصميم الأعمال الكهربائية المنشآت بانواعها بتقدير امتياز ٩٨ بالماءة