Mechanical Engineer
Total years of experience :0 years, 0 Months
Job responsibilities:
• Prepare and design tendering drawing for mechanical item including
calculations, selection materials & design drawing till to make
BOQs for projects.
• Review final invoices for finishing projects and review all materials
quantities as per as built drawing.
• Inspecting ongoing projects with site engineers and consultants and
following all mechanical activates works.
• Coordinating with projects managers to solving technical problems
as per site conditions.
• Prepare mechanical materials and installation drawing as per
projects requirements.
• Meeting and following instruction by head office then coordinating
and reflecting to sites through PM and consultants.
Wael Salah Ahmed 00966562164844
waeil44@hotmail.comEmail:Saudi Arabia-RiyadhAddress:
Mechanical Engineer at Saud Al-Eraifi consulting
engineering office for Leejam sport clubs (Al-Nuzha, Al-
Falah & Alaqiq projects
Job responsibilities:
• Prepare and design tendering drawing for mechanical item including
calculations, selection materials & design drawing till to make
BOQs for projects.
• Review final invoices for finishing projects and review all materials
quantities as per as built drawing.
• Inspecting ongoing projects with site engineers and consultants and
following all mechanical activates works.
• Coordinating with projects managers to solving technical problems
as per site conditions.
• Prepare mechanical materials and installation drawing as per
projects requirements.
• Meeting and following instruction by head office then coordinating
and reflecting to sites through PM and consultants.
Wael Salah Ahmed 00966562164844
waeil44@hotmail.comEmail:Saudi Arabia-RiyadhAddress:
Mechanical Engineer at Saud Al-Eraifi consulting
engineering office for Leejam sport clubs (Al-Nuzha, Al-
Falah & Alaqiq projects
Installation and implementation all HVAC units on project as per approval shop drawing and following ASHEREA & SMACNA Standards . Distribution work Manage, coordinate & distributing works with all sub- Contractor and staff to finish professional works. Manage and coordinate material and check with B.O.Q and managing the store for materials Solve technical problem and Check all Drawing before starting works and submit to consultant. Make operation testing and commissioning to consultant after finishing works when starting electrical current to confirm our works . Make technical & weekly report to head office regarding to inspection works.
as per following activities:
• Following & inspecting all mechanical work activities on site as Air
conditioning, ventilations, Firefighting, plumbing, elevators and
swimming pools works regarding to international codes as
SMACNA, NFPA, SPATA Codes.
• Review and approving for all mechanical calculations, shop
drawings & materials, following tender drawing and clients engineer
instructions.
• Coordinate mechanical works with another works as structural,
architectural and electrical works.
• Site Mechanical Engineer at Madar Al-Shamal Electro
Mechanical contractor company at Labor Housing project Riyadh
(Air conditioning and ventilation
as per following activities:
• Following & inspecting all mechanical work activities on site as Air
conditioning, ventilations, Firefighting, plumbing, elevators and
swimming pools works regarding to international codes as
SMACNA, NFPA, SPATA Codes.
• Review and approving for all mechanical calculations, shop
drawings & materials, following tender drawing and clients engineer
instructions.
• Coordinate mechanical works with another works as structural,
architectural and electrical works.
• Site Mechanical Engineer at Madar Al-Shamal Electro
Mechanical contractor company at Labor Housing project Riyadh
(Air conditioning and ventilation
All site activities installation and implementation for HVAC works
in projects as per approval shop drawing following ASHRAE &
SMACNA standards.
• Installation HVAC Devices at project and following drawing and
standard as ASHREA & SMACNA.
• Inspect all material & work activities science start work till
inspection by consultant.
• Ensure all team members working in safety, health and environment
conditions.
• Manage, coordinate & distributing works with all sub-
All site activities installation and implementation for HVAC works
in projects as per approval shop drawing following ASHRAE &
SMACNA standards.
• Installation HVAC Devices at project and following drawing and
standard as ASHREA & SMACNA.
• Inspect all material & work activities science start work till
inspection by consultant.
• Ensure all team members working in safety, health and environment
conditions.
• Manage, coordinate & distributing works with all sub-
Follow-up & inspecting as per approval shop drawing all mechanical works
&following workflow in the project as per:
• H.V.A.C system works :
Inspections for all activities on site as works executive, testing and
commissioning for all air conditioning and ventilations works as per
approved shop drawing, BOQs, ASHRAE & SMACNA Standards, the type
of system is chilled water air cooled system.
•Firefighting system works:
Inspection all works activities as per civil defense approved drawing, NFPA
Wael Salah Ahmed 00966562164844
waeil44@hotmail.comEmail:Saudi Arabia-RiyadhAddress:
code, Civil defense instructions for Automatic water sprinklers, powder,
FM200, Pump and hook up installation, pipes and valves installation.
•Plumping system works:
Inspection for installed all water supply, drainage, irrigation, heating water,
R.O & water treatment plant including installation of pipes, valves, pumps
and accessories as per approved drawing and materials.
• Medical gas system works:
Inspections of installation for all medical gas works activities as piping,
compressors, valves, accessories and following works with Sub Contractors
as per approved shop drawing and site requirement for following systems:
O2, N2O, MA4, MA7 & Vacuum systems
• eating, boiling & laundry system at hospital:
• Review and inspecting all mechanical works at the project& solving
technical problems.
• Service and Maintenance Engineer at Abdul latief Jameel
Limited company, (TOYOTA, LEXZUS) A.L.J, Al-Dhahran Road,
Eastern Region.
Follow-up & inspecting as per approval shop drawing all mechanical works
&following workflow in the project as per:
• H.V.A.C system works :
Inspections for all activities on site as works executive, testing and
commissioning for all air conditioning and ventilations works as per
approved shop drawing, BOQs, ASHRAE & SMACNA Standards, the type
of system is chilled water air cooled system.
•Firefighting system works:
Inspection all works activities as per civil defense approved drawing, NFPA
Wael Salah Ahmed 00966562164844
waeil44@hotmail.comEmail:Saudi Arabia-RiyadhAddress:
code, Civil defense instructions for Automatic water sprinklers, powder,
FM200, Pump and hook up installation, pipes and valves installation.
•Plumping system works:
Inspection for installed all water supply, drainage, irrigation, heating water,
R.O & water treatment plant including installation of pipes, valves, pumps
and accessories as per approved drawing and materials.
• Medical gas system works:
Inspections of installation for all medical gas works activities as piping,
compressors, valves, accessories and following works with Sub Contractors
as per approved shop drawing and site requirement for following systems:
O2, N2O, MA4, MA7 & Vacuum systems
• eating, boiling & laundry system at hospital:
• Review and inspecting all mechanical works at the project& solving
technical problems.
• Service and Maintenance Engineer at Abdul latief Jameel
Limited company, (TOYOTA, LEXZUS) A.L.J, Al-Dhahran Road,
Eastern Region.
Ascertains automotive problems and services.
• Designing of maintenance strategists, procedures and methods.
• planning & undertaking schedule maintenance.
• Prepares repair orders (RO) by describing symptoms, problems, and causes
discovered, as well as repairs and services required.
• Develops estimates by costing materials, supplies, and labor; calculating
customer's payment.
• Answering technical questions and concerns.
• Maintains automotive records by recording problems and corrective actions
planned.
• Managing& Monitoring maintenance process.
• Coordinating with chief technicians & spare parts department.
Registered in Saudi council of Engineering as (Mechanical Engineer).
Registered in Saudi council of Engineering as (Mechanical Engineer).
Electrical power generation using nuclear energy.
Electrical power generation using nuclear energy.