Senior Structural Design Engineer
Dar Al Riyadh
مجموع سنوات الخبرة :13 years, 6 أشهر
-Designed of multi-storied residential, commercial buildings, and Villas, using structural design software's Etabs, CSI-Safe, Sap2000, Staad Pro, and Prokon, also prepared calculation report.
-Co-ordinated with Architecture and MEP disciplines.
-Prepared a list of deliverables estimating manhours for new project proposals based on RFP.
-Prepared a structural design criteria and scope of GI works for new projects.
-Checked the structural drawings prepared by the cad team and guided them.
-Peer review the design submissions at each stage start from the concept to tender phase and review the project contract documents (project design drawings, BOQ, etc.).
-Compared the project’s multidiscipline design to identify any gaps or conflicts with client requirement’s, highlighted the area of the potential saving and Value Engineering.
-Conducted frequent meetings with the project’s client/consultant to coordinate the project’s architectural /structural needs and requirements before closing each stage.
-Provided a Technical support for site supervision, Review and provide necessary comments on any contractor technical submittals such as design, specifications, drawings, calculations, method statements, risk assessments … etc. for compliance with Employer’s Requirements, Authority Requirements, End-User Requirements, According to Local and International Standards.
Projects:
-Public Amenities-Riyadh Site 1 Phase 1- (ROSHN).
-Ministry of Culture Head Quarter Building - (DGDA).
-Housing Expansion Building - (KAUST).
-Infrastructure projects to various sites in Northern and Southern parts of KSA, such as Strom Lift Station, Irrigation tanks, Valve chamber, Culverts, and Manholes for Royal Commission (RCJ) and (MOH/NHC).
-Granada Mall Extension Riyadh - (GOSI).
-Technical support and design review for fit out projects - (KAFD).
-Peer review for Mobility Hubs and Schools - (MISK).
-Gallery and Studio Building - (MISK).Role: -Designed of multi-storied residential, commercial buildings, and Villas, using structural design software's Etabs, CSI-Safe, Sap2000, Staad Pro, and Prokon, also prepared calculation report. -Co-ordinated with Architecture and MEP disciplines. -Prepared a list of deliverables estimating manhours for new project proposals based on RFP. -Prepared a structural design criteria and scope of GI works for new projects. -Checked the structural drawings prepared by the cad team and guided them. -Peer review the design submissions at each stage start from the concept to tender phase and review the project contract documents (project design drawings, BOQ, etc.). -Compared the project’s multidiscipline design to identify any gaps or conflicts with client requirement’s, highlighted the area of the potential saving and Value Engineering. -Conducted frequent meetings with the project’s client/consultant to coordinate the project’s architectural /structural needs and requirements before closing each stage. -Provided a Technical support for site supervision, Review and provide necessary comments on any contractor technical submittals such as design, specifications, drawings, calculations, method statements, risk assessments … etc. for compliance with Employer’s Requirements, Authority Requirements, End-User Requirements, According to Local and International Standards. Projects: -Public Amenities-Riyadh Site 1 Phase 1- (ROSHN). -Ministry of Culture Head Quarter Building - (DGDA). -Housing Expansion Building - (KAUST). -Infrastructure projects to various sites in Northern and Southern parts of KSA, such as Strom Lift Station, Irrigation tanks, Valve chamber, Culverts, and Manholes for Royal Commission (RCJ) and (MOH/NHC). -Granada Mall Extension Riyadh - (GOSI). -Technical support and design review for fit out projects - (KAFD). -Peer review for Mobility Hubs and Schools - (MISK). -Gallery and Studio Building - (MISK).
My responsibility is to study and develop structural options and choose the best option for the project considering the cost, fesibility and fulfilling project, client and regulatory authority requirements. Structural design of the project is carried out by considering applicable codes, standard software, load criteria, material, wind, seismic parameter pertaining project. The final three dimensional analysis model of the building is developed using Etabs software v 19. The foundation and slab of the building is designed using SAFE v16, Hand calculations and MS excel spreadsheets are used to design and verify all other structural elements.
• Review, Comment and Approval of Design calculations, Shop drawings
& material submittals.
• Review of geotechnical and topographical reports and preparing Technical reports.
• Monitoring the progress of the project and its timely completion.
Designing and coordinating the structural plans for TBC projects, includingFemale sports halls projects, a 500 schools upgrade projects and nursingschools projects, and reviewing structural plans for other projects.Job included designing structural prototypes models with different bearingcapacities to accumulate for sites diversity, preparing the plans, site adaptationand preparing the tender documents.
Career Sequence:- Director of Department of Structural Design (11/2017 to 04/2019)
- Design and supervision engineer (11/2016 and 11/2017)
Achievements:
•Studying architectural drawings and purpose the reasonable structural system
for the gravity and lateral loads.
•Applying expert knowledge of the forces that act on various structures.
•Preparing a finite element analysis models to design and check the structure
against gravity and lateral loads (Seismic & Wind) according to the codes of
the practice.
•Making drawings, specifications and computer models of structures for
building contractors in coordination with all project disciplines.
•Prepare calculation documents.
•Samples of projects:
•Jarir bookstore, Burida, KSA
The project is consists of two building, each of two floors and penthouse with
area of 9, 000 square meters.
•Bukhara Boulevard commercial project, Burida, KSA
The project is consists of one Basement, Ground, two floors with area of 3, 800
square meters.
•Bait Ahel Alkhebra Factory, Burida, KSA
The project is consists of steel frames with area of 16, 000 square meters.
•Raf Alkhaleeg Factory, Burida, KSA
The project is consists of steel frames with area of 21, 400 square meters.
Key responsibilities :
- I lead a team of 2 engineers in order to reach the best structural designs that
meet the demands of code and satisfied customers.
- Preparation of construction plans for projects and distribution of work to be
completed as soon as possible.
- Review structural designs to reach the best design.
Assistant in the formulation of strategy and activity plans to achieve the
projects objectives.
- Optimize the project schedules in the light of a changing technical and
business environment.
- Develop and maintain plans and schedules deliverable at all levels of
management with inputs from engineering, construction, operations,
maintenance and commissioning.
- Preparation and issue of weekly and monthly reports for the Management
- Calculating the quantities of all project items.
- Check designs.
- Preparing shop drawings and as-built drawings.
- Quality control for the projects.
- Supervision for the projects.
- Preparing projects specifications.
- Working with government tenders and procurement law and it's Implementing
regulations in kingdom of Saudi Arabia.
•Studying architectural drawings and purpose the reasonable structural system
for the gravity and lateral loads.
•Applying expert knowledge of the forces that act on various structures.
•Preparing a finite element analysis models to design and check the structure
against gravity and lateral loads (Seismic & Wind) according to the codes of
the practice.
•Making drawings, specifications and computer models of structures for
building contractors in coordination with all project disciplines.
•Prepare calculation documents
I have Bachelor`s degree from Alexandria University in civil department at 2010
