Project Engineer
Mohammed Ali Al Swailem Construction Group (MASCO)
Total years of experience :11 years, 7 Months
1. NEOM PROJECT- Construction of Access Road, Highway Lane Widening U-Turn Works for Laydown Yards.
Mohammed Ali Alswailem Group
Scope of Work:
The overall objective of this scope of work is to describe necessary infrastructure works required to further facilitate the upcoming permanent works of the Oxagon to Gayal water transmission system, to provide access to laydown yards.
Key Responsibilities:
• Ensuring works are executed in accordance with the contract and specification, Approved drawings, Materials, ITP & Method Statements.
• Implementing and maintaining the QA/QC inspections on all processes and materials.
• Documentation of inspection activities and conduct material inspection on incoming materials.
• Construction of the Access Roads from Highway 55 to the laydown yards, in particular LD-1, LD-3, & LD-4.
• Construction of existing culverts extension along HW-55.
• Construction of Acceleration and Deceleration lanes on HW-55
• Construction of the Storm drainage/flood protection along the access roads.
• To coordinate timely with the survey team, material team, planning team, design, drawing team, contractor, sub-contractor and client as per requirement.
• To ensure that HSE practices are acceptable and that to adequate measures
2. NEOM LINE Project (Spine Earthworks, Work Order No. 1100001342-WO-013)-KSA
Mohammed Ali Alswailem Group
Scope of Work:
The scope includes clearing, grubbing, controlled excavation to defined levels, material testing,
Segregation, management of stockpiles within the Site Boundary limits, transportation of excavated
Materials to the Employer’s stockpiles and storage areas from the Site Boundary, and all Temporary
Works necessary to complete the Works.
Key Responsibilities:
• Responsible for managing all activities of the project that includes manpower, equipment and material involved in site.
• Ensuring works are executed in accordance with the contract and specification, Approved drawings, Materials, ITP & Method Statements.
• Coordinating with sub-contractors and Suppliers
• Maintain records of the contractor human and equipment daily resources.
• To coordinate timely with the survey team, material team, planning team, sub-contractor and client as per requirement.
• Perform all activities in compliance with the Company Health, Safety & Environmental Management System.
Etihad Rail Stage 2 & 3, Package 2C (C0306)-UAE.
Designation : Structural site Engineer.
Client : Etihad Rail.
Contractor : CRCC-GTGC-JV.
Consultant : Jacobs.
Responsibilities :
Responsible for execution of Structural works and related all Site works with project execution plans
specifications, preparing of site logistics plans and site layout plans.
Execution and supervision of Utility diversions, Excavation Works, Compaction, Blinding,
Waterproofing, Screed Concrete, Rebar Installation (Pile cap, Pier, Pier cap, Abutment Wall),
Formwork (Pile cap, Pier, Pier cap, Abutment Wall) Concreting, Bearing Installation, Concrete Base
for Scaffolding, Installation of Scaffold, Formworks for Girder, Rebar for Girder, P.T Duct Profiling,
Installation of Anchors, Concreting for (Base Slab, Webs, Diaphragms, Top Slab, Barriers), Approach
Slab.
Follow up and implement any site instructions made by Project Manager or Consultant.
Coordinating with sub-contractors and Suppliers
Maintain records of the contractor human and equipment daily resources.
To coordinate timely with the survey team, material team, planning team, design, drawing team,
contractor, sub-contractor and client as per requirement.
Review the quality of all materials at the site, ensure compliance with all project specifications and
quality, and collaborate with the department for all material procurement and quality materials.
Ensure that all materials and equipment incorporated into permanent construction are in compliance
with the contract requirements.
Dealing with the supervision consultant for all site inspections.
To raise technical queries where information conflict exists or is missing, and act on responses.
Supervising and instructing Foremen in day to day Site activities.
Implementing and maintaining the QA/QC inspections on all processes and materials.
Documentation of inspection activities and conduct material inspection on incoming materials.
To ensure that HSE practices are acceptable and that to adequate measures
Consultancy Services For Inspection and Safety Certification of Road Structures-UAE.
Designation : Structural Inspector. (ADM Approved)
Client : Department of Urban Planning and Municipalities Affair,
Abu Dhabi Municipality (ADM).
Consultant : Dorsch Holding Gmbh Abu Dhabi.
Responsibilities :
Supervision and Inspecting of the existing Structures for the maintenances.
Identifying the structural defects like delamination in concrete, spalls, expansion joints, bearing pads,
barriers, paint of the structure, cracks, parapet walls,
Record the defects of structure activities carried out, on applicable forms provided by project
requirements.
Prepare Daily reports and weekly progress reports.
Preparing of structural reports to Evaluate the overall existing condition of the structure
The report comprises of defects, recommendations to repair defects and inventory with rating for the
structure elements
Route-2020 Extension of Red Line Dubai Metro -UAE
Designation : Civil Site Engineer.
Client : Roads & Transport Authority (RTA).
Contractor : Expo Link 2020.
Consultant : Parsons-Systra JV
Responsibilities :
Precast Elements-Segmental (ISO-Straight, Curved, Transition, Twin, BC, Station span, & Pier cap).
Ensuring works are executed in accordance with the contract and specification, Approved drawings,
Materials, ITP & Method Statements.
Monitoring and coordinating of all civil work activities for the casting of precast segments by using
short line method. I am responsible for Balance Cantilever, Typical and expansion joint segment
Construction and Supervisions of rebar cages fixing, PT profile work as per drawing, Mould closing;
Inserts adjusting and positioning; Mould stripping works.
Maintaining Records of incoming materials and reporting to the management.
Perform internal inspection and test in Mould Segments Productions (Rebar inspections, Post
Tension Ducts & Prepour) prior to inspect with client Representative (Engineers).
To ensure that all monitoring and Measurement Equipment’s are calibrated and the log reflecting the
next calibration due are maintained.
Conduct segments post pour inspections defects mapping & repair works. Conduct inspection for
Final Acceptance and delivery of segments to erections site.
Prepare Daily ITR with complete document attachments, Daily Reports, and closing NCR / Site
Observations Reports.
Riyadh Metro Rail-KSA
Designation : Civil Site Engineer.
Client : AR Riyadh Development Authority (ADA).
Contractor : Fast Consortium.
Consultant : Ramped.
Responsibilities:
Responsible for execution of Civil and Structural works and related Site works with project execution
plans, specifications, and legislation standard.
Execution and supervision of Utility diversions, Excavation Works, Compaction, Blinding,
Waterproofing, Screed Concrete, Formwork, Rebar Installation (Base Slab, Wall, Top Slab), StudBeams, Parapet Wall, Installation of Filler boards, Water Stoppers, Water Swelling Gaskets, Dowel
Bars, Concreting, Finishing works, Joint Sealant, Second Stage Concrete, Primer, Protection Board,
Backfilling and Compaction.
Conducting various training programs for the foreman, Workmen in order to provide the knowledge of
the work activity as per the method statement to get the good quality at site.
To make off-Site visit to Supplier and Sub Contractor’s Manufacturing/fabrication facilities to ensure
compliance to requirements.
Optimum utilization of machineries and manpower,
Prepare Daily reports and weekly progress reports.
Maintain records of materials tests performed and executed works.
Prepare Bill of Quantity for monthly progress Invoice and Final Quantities of Project.
Perform all activities in compliance with the Company Health, Safety & Environmental Management
System.
Road Bridges Riyadh-KSA
Designation : Site Engineer.
Client : Ministry of Municipal and Rural Affairs (MOMRA).
Contractor : SOMAC Contracting Company.
Consultant : Abalkhail Consulting Engineers.
Responsibilities:
Ensure implementation of site works in accordance with project execution plans, legislation standard.
Execution and supervision of Utility diversions, Excavation Works, Compaction, Blinding,
Waterproofing, Screed Concrete, Rebar Installation (Foundation, Column, Pier cap, Abutment Wall),
Formwork (Foundation, column & Pier Cap, Abutment Wall) Concreting, Bearing Installation, Concrete
Base for Scaffolding, Installation of Scaffold, Formworks for Girder, Rebar for Girder, P.T Duct Profiling,
Installation of Anchors, Concreting for (Base Slab, Webs, Diaphragms, Top Slab, Barriers), Casting and
Erection of Mechanically Stabilized Earth Wall Panel’s (MSE Wall), Approach Slab, Installation of curb
stone, Interlock tiles for Pedestrian walkway, Primer, Waterproofing membrane, Tack Cote, Asphalt,
Road Markers (Paint markers, Ceramic markers, Cat’s eye markers, sign boards), Expansion Joints,
Lighting Poles, Paint Works, Landscaping Works.
Follow up and implement any site instructions made by Project Manager or Consultant.
To make off-Site visit to Supplier and Sub Contractor’s Manufacturing/fabrication facilities to ensure
compliance to requirements.
Maintain records of the contractor human and equipment daily resources.
To raise technical queries where information conflict exists or is missing, and act on responses.
Supervising and instructing Foremen in Day to day Site activities.
Prepare Daily reports and weekly progress reports, Preparing Quantity for monthly progress Invoice.
Implementing and maintaining the QA/QC inspections on all processes and materials.
Documentation of inspection activities and conduct material inspection on incoming materials.
To ensure that HSE practices are acceptable and that to adequate measures.