Total Years of Experience: 30 Years, 11 Months
February 2018
To Present
Electrical Technician
at MOTOGEN ROTATING MACHINES SERVICES PVT. LTD
Location :
India
Expertise on High Voltage Motors Winding.
•Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
•Perform rewinding, repair of electric motor/ generator.
•Read and drawing winding diagrams.
•Collect winding data and record on winding data sheet.
•Collect and fill high voltage motor coil data sheet.
•Identify cause of winding failure.
•Inspect, identify and repair damaged core.
•Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
•Rewind three-phase and single-phase motor with round and flat wire.
•Rewind high voltage motor with prefabricated formed coils.
•Fit and replace winding temperature sensors and heater.
•Fabricate/insulate coils with flat wire
•Rewind magnetic, brake coils including fabricating bobbins and former.
•Rewind DC armature, inter pole and shunt winding.
•Reading and understanding electro-mechanical drawings and symbols.
•Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
•Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
•Perform rewinding, repair of electric motor/ generator.
•Read and drawing winding diagrams.
•Collect winding data and record on winding data sheet.
•Collect and fill high voltage motor coil data sheet.
•Identify cause of winding failure.
•Inspect, identify and repair damaged core.
•Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
•Rewind three-phase and single-phase motor with round and flat wire.
•Rewind high voltage motor with prefabricated formed coils.
•Fit and replace winding temperature sensors and heater.
•Fabricate/insulate coils with flat wire
•Rewind magnetic, brake coils including fabricating bobbins and former.
•Rewind DC armature, inter pole and shunt winding.
•Reading and understanding electro-mechanical drawings and symbols.
•Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
April 2014
To December 2017
Senior Rewinding Technician
at Hitachi Saihati Engineering Services
Location :
Saudi Arabia - Dammam
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
December 2012
To December 2013
Senior Mechanical Technician
at SHOAIBA POWER PLANT WITH SWCC
Location :
Saudi Arabia - Dammam
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
March 2009
To May 2012
Generator Rewinding and Servicing Technician
at Advanced Triad Turbine Services
Location :
Saudi Arabia - Jeddah
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
November 2004
To November 2008
Rewinding & Generator Motor Servicing Technician
at Paramount Arabia Ltd
Location :
Saudi Arabia - Jeddah
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
October 2001
To November 2004
Generator manufacturing Operator
at Toyo Denky Power Systems Pvt Ltd
Location :
India - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
February 1998
To September 2001
Winder
at Jagath Industries
Location :
India - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
January 1995
To January 1998
Winder
at BHEL (Bharath Heavy Electricals Limited
Location :
India - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
June 1991
To March 1994
Assistant Winder
at PES (Prestile Engineering Service ) Pvt Ltd
Location :
India - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
Share on Facebook
Share on Twitter
Share Via Email