Total des années d'expérience: 30 Années, 11 Mois
février 2018
A À présent
Electrical Technician
à MOTOGEN ROTATING MACHINES SERVICES PVT. LTD
Lieu :
Inde
Expertise on High Voltage Motors Winding.
•Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
•Perform rewinding, repair of electric motor/ generator.
•Read and drawing winding diagrams.
•Collect winding data and record on winding data sheet.
•Collect and fill high voltage motor coil data sheet.
•Identify cause of winding failure.
•Inspect, identify and repair damaged core.
•Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
•Rewind three-phase and single-phase motor with round and flat wire.
•Rewind high voltage motor with prefabricated formed coils.
•Fit and replace winding temperature sensors and heater.
•Fabricate/insulate coils with flat wire
•Rewind magnetic, brake coils including fabricating bobbins and former.
•Rewind DC armature, inter pole and shunt winding.
•Reading and understanding electro-mechanical drawings and symbols.
•Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
•Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
•Perform rewinding, repair of electric motor/ generator.
•Read and drawing winding diagrams.
•Collect winding data and record on winding data sheet.
•Collect and fill high voltage motor coil data sheet.
•Identify cause of winding failure.
•Inspect, identify and repair damaged core.
•Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
•Rewind three-phase and single-phase motor with round and flat wire.
•Rewind high voltage motor with prefabricated formed coils.
•Fit and replace winding temperature sensors and heater.
•Fabricate/insulate coils with flat wire
•Rewind magnetic, brake coils including fabricating bobbins and former.
•Rewind DC armature, inter pole and shunt winding.
•Reading and understanding electro-mechanical drawings and symbols.
•Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
avril 2014
A décembre 2017
Senior Rewinding Technician
à Hitachi Saihati Engineering Services
Lieu :
Arabie Saoudite - Dammam
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
décembre 2012
A décembre 2013
Senior Mechanical Technician
à SHOAIBA POWER PLANT WITH SWCC
Lieu :
Arabie Saoudite - Dammam
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
mars 2009
A mai 2012
Generator Rewinding and Servicing Technician
à Advanced Triad Turbine Services
Lieu :
Arabie Saoudite - Jeddah
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
novembre 2004
A novembre 2008
Rewinding & Generator Motor Servicing Technician
à Paramount Arabia Ltd
Lieu :
Arabie Saoudite - Jeddah
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
octobre 2001
A novembre 2004
Generator manufacturing Operator
à Toyo Denky Power Systems Pvt Ltd
Lieu :
Inde - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
février 1998
A septembre 2001
Winder
à Jagath Industries
Lieu :
Inde - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
janvier 1995
A janvier 1998
Winder
à BHEL (Bharath Heavy Electricals Limited
Lieu :
Inde - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
juin 1991
A mars 1994
Assistant Winder
à PES (Prestile Engineering Service ) Pvt Ltd
Lieu :
Inde - Bengaluru
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
Partager sur Facebook
Partager sur Twitter
Partager via Email