Electrical Technician
MOTOGEN ROTATING MACHINES SERVICES PVT. LTD
Total years of experience :31 years, 1 Months
Expertise on High Voltage Motors Winding.
•Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
•Perform rewinding, repair of electric motor/ generator.
•Read and drawing winding diagrams.
•Collect winding data and record on winding data sheet.
•Collect and fill high voltage motor coil data sheet.
•Identify cause of winding failure.
•Inspect, identify and repair damaged core.
•Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
•Rewind three-phase and single-phase motor with round and flat wire.
•Rewind high voltage motor with prefabricated formed coils.
•Fit and replace winding temperature sensors and heater.
•Fabricate/insulate coils with flat wire
•Rewind magnetic, brake coils including fabricating bobbins and former.
•Rewind DC armature, inter pole and shunt winding.
•Reading and understanding electro-mechanical drawings and symbols.
•Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation.
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
• Expertise on High Voltage Motors Winding.
• Handling 13.8 KV High Voltage motors from 1 MW to 130 MW.
• Perform rewinding, repair of electric motor/ generator.
• Read and drawing winding diagrams.
• Collect winding data and record on winding data sheet.
• Collect and fill high voltage motor coil data sheet.
• Identify cause of winding failure.
• Inspect, identify and repair damaged core.
• Usage of winding test and measuring equipment like insulation, resistance, multi-meter, bar to bar tester, growler, micro meter and Vernier caliper.
• Rewind three-phase and single-phase motor with round and flat wire.
• Rewind high voltage motor with prefabricated formed coils.
• Fit and replace winding temperature sensors and heater.
• Fabricate/insulate coils with flat wire
• Rewind magnetic, brake coils including fabricating bobbins and former.
• Rewind DC armature, inter pole and shunt winding.
• Reading and understanding electro-mechanical drawings and symbols.
• Coil Manufacturing with 3.3KV/6.6KV/11KV/13.8KV Insulation
Diploma in Electrical Engineering