Total des années d'expérience: 15 Années, 2 Mois
février 2019
A À présent
Senior Mechanical Engineer
à EHAF Consulting Engineers (Hill-Ehaf JV)
Lieu :
Egypte - Le Caire
Working in Grand Egyptian Museum& 1. Monitors construction Contractors’ mechanical installation and testing activities,
including, but not limited to piping, leak tests, duct work & insulation, pumps, building
management system, HVAC controls, domestic water systems, foundation de-watering
system, etc.
2.Witnesses Contractors’ quality control inspections to ensure that the permanent works
are constructed according to the contract, applicable codes, standards, approved drawings
and specifications (i.e. leak detection, equipment startup and commissioning)
3.Reviews Contractors’ mechanical quality assurance and quality control programs,
inspection and test plans, installation, testing, and as-built procedures, for all mechanical
systems and comments for transmittal to the contractors.
4.Organizes, coordinates, and conducts in conjunction with the concerned
departments/organizations acceptance inspections and re-inspections of the completed
permanent works, until all deficiencies are corrected and signed off
5.Inspect ceiling closures and Make Pre snagging Inspections
6. Assists Contractor with coordination of the MEP process, including the development of
coordinated slab penetration drawings, MEP ceiling and wall coordination, coordination of
condensate drain systems
including, but not limited to piping, leak tests, duct work & insulation, pumps, building
management system, HVAC controls, domestic water systems, foundation de-watering
system, etc.
2.Witnesses Contractors’ quality control inspections to ensure that the permanent works
are constructed according to the contract, applicable codes, standards, approved drawings
and specifications (i.e. leak detection, equipment startup and commissioning)
3.Reviews Contractors’ mechanical quality assurance and quality control programs,
inspection and test plans, installation, testing, and as-built procedures, for all mechanical
systems and comments for transmittal to the contractors.
4.Organizes, coordinates, and conducts in conjunction with the concerned
departments/organizations acceptance inspections and re-inspections of the completed
permanent works, until all deficiencies are corrected and signed off
5.Inspect ceiling closures and Make Pre snagging Inspections
6. Assists Contractor with coordination of the MEP process, including the development of
coordinated slab penetration drawings, MEP ceiling and wall coordination, coordination of
condensate drain systems
août 2017
A août 2018
Shift Engineer
à Semiramis- Intercontinental Hotel (High Raise Building)
Lieu :
Egypte - Le Caire
1.Responsible for solving any troubleshooting during the shift, check all equipment and swimming pool in the hotel, guiding and issuing assignment to the shift team, good understanding of all building Electro mechanical systems, able to use test equipment .
février 2016
A janvier 2017
Mechanical Construction manager
à Al Huda Engineering Company
Lieu :
Qatar - Doha
1.Ensures that the services of subcontractors and major construction equipment required by the project will be available at the appropriate time to ensure maximum efficiency and productivity.
2.Establishes assignments for Construction Superintendents for various work areas of construction operations, monitoring progress and recommending corrective action as necessary.
3.Prepares periodic reports summarizing progress of construction activities for higher-level management and clients.
4.Follow-up with sub-contractors, consultant. Manage the firefighting-HVAC-Plumbing work in site, follow the shop drawing, and make inspection request and material inspection. Responsible for reading reports from junior engineers, supervisors and discuss with them the progress of work.
2.Establishes assignments for Construction Superintendents for various work areas of construction operations, monitoring progress and recommending corrective action as necessary.
3.Prepares periodic reports summarizing progress of construction activities for higher-level management and clients.
4.Follow-up with sub-contractors, consultant. Manage the firefighting-HVAC-Plumbing work in site, follow the shop drawing, and make inspection request and material inspection. Responsible for reading reports from junior engineers, supervisors and discuss with them the progress of work.
janvier 2014
A janvier 2016
Mechanical engineer
à Samama Contracting Company
Lieu :
Arabie Saoudite - Riyad
1.Responsible for Supervise sub-contractors team performance, guide and report any problems to Site Manager in order to take necessary actions.
2.Manage day-to-day site issues, including supervising and monitoring the site labor force and the work of any subcontractors.
3.Prepare daily status report to present zone performance and obstacles need to solve.
4.Inspects deliveries/installed/constructed work to ensure that it is in accordance with shop drawings.
5.Prepare CIRs and submit to consultant for approval.
6.Work in technical office for period in submittal of material.
2.Manage day-to-day site issues, including supervising and monitoring the site labor force and the work of any subcontractors.
3.Prepare daily status report to present zone performance and obstacles need to solve.
4.Inspects deliveries/installed/constructed work to ensure that it is in accordance with shop drawings.
5.Prepare CIRs and submit to consultant for approval.
6.Work in technical office for period in submittal of material.
juillet 2011
A décembre 2013
Founder And Owner
à Air Square
Lieu :
Egypte - Le Caire
1. Founder for small size company specialized in installation and maintenance for all A/C equipment and accessories .Responsible for arrange work with supervisors and labors.
2. Receive complaints from customers and solve the problems.
3. Track and monitor daily/weekly/monthly progress of work.
4. Follow up the work in the site. Try to bring new customers.
2. Receive complaints from customers and solve the problems.
3. Track and monitor daily/weekly/monthly progress of work.
4. Follow up the work in the site. Try to bring new customers.
mars 2009
A mars 2010
Sales Engineer
Jai trouvé cet emploi à travers Bayt.com
à Carrier
Lieu :
Arabie Saoudite - Dammam
1. Working in dealer channel, where I am responsible for making submittals for all AC equipment, giving the submittals to the contractor.
2. Making selection and design for AHU, FCU, Package units, Chillers for mega projects. Visit the site to check the installation procedure.
3. Initiate and coordinate sales in large construction projects, produce cost analysis and carry out contract negotiations.
4. Work closely with contractors, consultants and proprietors. Develop large base of industry contacts.
2. Making selection and design for AHU, FCU, Package units, Chillers for mega projects. Visit the site to check the installation procedure.
3. Initiate and coordinate sales in large construction projects, produce cost analysis and carry out contract negotiations.
4. Work closely with contractors, consultants and proprietors. Develop large base of industry contacts.
avril 2008
A février 2009
Sales Engineer
à ELMAC Company
Lieu :
Arabie Saoudite - Riyad
1.Working as sales Engineer for Air conditioning spare parts and maintenance contract, In which this allows me to understand air conditioning in depth.
2.Bring new customers and collect funds from customers .
3.Make site visit to check the system after and before maintenance to be sure about the system operation and quality .
2.Bring new customers and collect funds from customers .
3.Make site visit to check the system after and before maintenance to be sure about the system operation and quality .
août 2006
A décembre 2007
Workshop Manager ( Part Time Job )
à PICO Engineering Company
Lieu :
Egypte - Le Caire
1.Working as manger of workshop for maintenance and troubleshooting of Ingersollrand Compressors, Hyster forklift and Case Heavy equipment .
2. Ensure timely completion of job as per the quality standards laid down in the workshop manual and ensure manufacturer Service Process is properly following in every case and Prepare Iso papers and follow safety procedures .
2. Ensure timely completion of job as per the quality standards laid down in the workshop manual and ensure manufacturer Service Process is properly following in every case and Prepare Iso papers and follow safety procedures .
Partager sur Facebook
Partager sur Twitter
Partager via Email