Total Years of Experience: 17 Years, 7 Months
September 2010
To Present
method and planning team leader
at italicementi
Location :
Egypt - Cairo
Develop the short-term and the long-term shutdown plans.
Assisting in the maintenance annual budget regarding the collected inspections done on the plant’s equipment.
Perform machinery diagnosing to the plant equipment using the vibration analysis, thermograph and oil analysis.
Monitor the equipment conditions and parameters to early detect of any errors.
Develop the job requests to maintenance department to correct the detected error to prevent breakdowns.
Correct mass unbalance problem by applying in-filed and doing misalignment correction.
Manpower management for day to day activities.
Experienced with:-
Grinding mills(ball, rollers)
kilns, grate coolers(mechanical, hydraulic)
Plant utilities such as compressors (screw& piston), pumps (centrifugal & gear) and blowers.
Assisting in the maintenance annual budget regarding the collected inspections done on the plant’s equipment.
Perform machinery diagnosing to the plant equipment using the vibration analysis, thermograph and oil analysis.
Monitor the equipment conditions and parameters to early detect of any errors.
Develop the job requests to maintenance department to correct the detected error to prevent breakdowns.
Correct mass unbalance problem by applying in-filed and doing misalignment correction.
Manpower management for day to day activities.
Experienced with:-
Grinding mills(ball, rollers)
kilns, grate coolers(mechanical, hydraulic)
Plant utilities such as compressors (screw& piston), pumps (centrifugal & gear) and blowers.
June 2009
To September 2010
Condition Monitoring Engineer
at Petro Rabigh
Location :
Saudi Arabia - Jeddah
Acting as a condition monitoring engineer in Petro Rabigh a petrochemical plant which is consisting of a crude oil refinery, monomer plant and polymer plant. Working as a contractor for the condition monitoring under the reliability section.
- Working with CSI analyzers 2120 single and dual channel, 2130 Pro Consultant and Bently
Nevada Snapshot and Snapshot for Windows CE.
- Online monitoring working with Bently ADRE® Sxp and 408 DSPi Data Acquisition System, 3500
Series Machinery Protection System and Bently Nevade software System1® for online
monitoring.
- using CSI’s software AMS machinery health manager V4.9 and V5.31.
- Performing misalignment correction jobs.(using a PRÜFTECHNIK laser kit)
- Performing balance jobs (single plane and multiple planes) with the 2120 and 2130 analyzers.
- Giving technical reports about the equipment’s health.
- Measuring all the rotating equipments.
- Leading a team of 5 inspectors to cover 1800 equipment.
- Working with CSI analyzers 2120 single and dual channel, 2130 Pro Consultant and Bently
Nevada Snapshot and Snapshot for Windows CE.
- Online monitoring working with Bently ADRE® Sxp and 408 DSPi Data Acquisition System, 3500
Series Machinery Protection System and Bently Nevade software System1® for online
monitoring.
- using CSI’s software AMS machinery health manager V4.9 and V5.31.
- Performing misalignment correction jobs.(using a PRÜFTECHNIK laser kit)
- Performing balance jobs (single plane and multiple planes) with the 2120 and 2130 analyzers.
- Giving technical reports about the equipment’s health.
- Measuring all the rotating equipments.
- Leading a team of 5 inspectors to cover 1800 equipment.
August 2006
To June 2009
Predictive Maintenance Engineer
at ASEC
Location :
Egypt
Acting as a condition monitoring engineer in a cement manufacturing plant.
- Working with CSI analyzers 2120 single and dual channel, 2130 Pro Consultant.
- Making balance jobs (single plane and multiple planes) with the 2120 and 2130 analyzers.
- Making Cross-Phase measurements detecting Resonance, Misalignment, Soft foot and Looseness.
- Giving a monthly technical report about the equipment’s health using the AMS a CSI’s software.
- Measuring Industrial Handling Fans, Gearboxes, AC Motors, Air Blowers, Air Compressors and Pumps.
- Working with CSI analyzers 2120 single and dual channel, 2130 Pro Consultant.
- Making balance jobs (single plane and multiple planes) with the 2120 and 2130 analyzers.
- Making Cross-Phase measurements detecting Resonance, Misalignment, Soft foot and Looseness.
- Giving a monthly technical report about the equipment’s health using the AMS a CSI’s software.
- Measuring Industrial Handling Fans, Gearboxes, AC Motors, Air Blowers, Air Compressors and Pumps.
Share on Facebook
Share on Twitter
Share Via Email