MEP Section Head
ikk group
Total des années d'expérience :20 years, 11 Mois
Review the contract documents, MEP drawings, comply with the scope of work and requirements.
Manage and lead all electrical and mechanical works and in sites
prepare submittals such as shop drawings, As-Built and materials, ensuring compliance with concept design, properly coordinated with other disciplines and submitted as per the approved construction schedules, addressing any foreseen cost and Time Impact.
Coordinate with sites Engineers to Ensure quality of work and production rates in sites is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.
Witness and ensure full compliance with project requirements of pre-commissioning, commissioning, testing, balancing and functional performance tests activities, Oversee the completion of project on time, and within approved budget, review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements.
Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements and advises of any deficiency. Review Contractor’s submittals such as shop drawings and materials, ensuring compliance with concept design, properly coordinated with other disciplines and submitted as per the approved construction schedules. Any deviation from project specification shall be notified vide Material Approval Request Verification form, review alternatives to the Design submitted by the Contractor, prepare and submit a report including recommendation highlighting advantages and disadvantages of each alternative addressing any foreseen cost and Time Impact, Coordinate with QA Engineers to establish the intervention point in the proposed Inspection and Test Plan,
Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition, Witness and ensure full compliance with project requirements of pre-commissioning, commissioning, testing, balancing and functional performance tests activities, Oversee the completion of project on time and within approved budget, review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements, Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer, Participate with PMC disciplines in reviewing the Close-Out Report as submitted by contractor and review As-Built drawings as submitted by Contractor.
Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements and advises of any deficiency. Review Contractor’s submittals such as shop drawings and materials, ensuring compliance with concept design, properly coordinated with other disciplines and submitted as per the approved construction schedules. Any deviation from project specification shall be notified vide Material Approval Request Verification form, review alternatives to the Design submitted by the Contractor, prepare and submit a report including recommendation highlighting advantages and disadvantages of each alternative addressing any foreseen cost and Time Impact, Coordinate with QA Engineers to establish the intervention point in the proposed Inspection and Test Plan,
Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition, Witness and ensure full compliance with project requirements of pre-commissioning, commissioning, testing, balancing and functional performance tests activities, Oversee the completion of project on time and within approved budget, review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements, Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer, Participate with PMC disciplines in reviewing the Close-Out Report as submitted by contractor and review As-Built drawings as submitted by Contractor.
Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements and advises of any deficiency. Review Contractor’s submittals such as shop drawings and materials, ensuring compliance with concept design, properly coordinated with other disciplines and submitted as per the approved construction schedules. Any deviation from project specification shall be notified vide Material Approval Request Verification form, review alternatives to the Design submitted by the Contractor, prepare and submit a report including recommendation highlighting advantages and disadvantages of each alternative addressing any foreseen cost and Time Impact, Coordinate with QA Engineers to establish the intervention point in the proposed Inspection and Test Plan,
Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition, Witness and ensure full compliance with project requirements of pre-commissioning, commissioning, testing, balancing and functional performance tests activities, Oversee the completion of project on time and within approved budget, review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements, Make sure that any non-conformity has been reported through a Non Conformance Report (NCR). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer, Participate with PMC disciplines in reviewing the Close-Out Report as submitted by contractor and review As-Built drawings as submitted by Contractor.
Follow-up project execution, coordinate between different engineering disciplines, providing technical recommendation and appropriate actions required to resolve technical problems, chair the progress and technical meetings, submit and prepare for material submittals, shop drawings, technical queries, method statements, ITPs, invoices, claims, variation orders, As-built drawings. . Etc.
Duties & Responsiblities
•Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements and advises of any deficiency.
•Review Contractor’s submittals such as shop drawings and materials, ensuring compliance with concept design, , properly coordinated with other disciplines and submitted as per the approved construction schedules. Any deviation from project specification shall be notified vide Material Approval Request Verification form.
•Review alternatives to the Design submitted by the Contractor, prepare and submit a report including recommendation highlighting advantages and disadvantages of each alternative addressing any foreseen cost and Time Impact.
•Participate in all Quality Control/Quality Assurance aspects.
•Ensure that the Contractor incorporated the comments raised from previous Stages.
•Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
•Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.
•Closely monitor inspector Engineer performance and advises the Construction Manager in case of deficiency or poor performance.
•Oversee the completion of project on time and within approved budget.
•Review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements.
•Participate with PMC disciplines in reviewing the Close-Out Report as submitted by contractor.
•Review As-Built drawings as submitted by Contractor. As built drawing shall be
•properly coordinated with the site Inspection Team to make sure that it matches all site changes.
Project: Jabal AlKabah Hotel
Duties & Responsiblities
•Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements and advises of any deficiency.
•Review Contractor’s submittals such as shop drawings and materials, ensuring compliance with concept design, , properly coordinated with other disciplines and submitted as per the approved construction schedules. Any deviation from project specification shall be notified vide Material Approval Request Verification form.
•Review alternatives to the Design submitted by the Contractor, prepare and submit a report including recommendation highlighting advantages and disadvantages of each alternative addressing any foreseen cost and Time Impact.
•Coordinate with Senior QA Engineer to establish the intervention point in the proposed Inspection and Test Plan.
•Participate in all Quality Control/Quality Assurance aspects.
•Monitoring/Supervision/Inspection during the construction.
•Regular visits to Project site to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report any deviations.
•Regular spot checks of material delivered to site, and direct the relevant Inspector Engineer to continue inspection of stored materials on site to ensure it is as per approved materials and in good condition.
•Witness and ensure full compliance with project requirements of pre-commissioning, commissioning, testing, balancing and functional performance tests activities.
•Review spare parts, operation & maintenance manuals of trades and ensure compliance with contract requirements.
Projects: Tropitel & Old Palace hotels in (Sahel Hassish), Naeem Building in (smart village), Hilton Sharks Bay Hotel - (Sharm Elsheik), Haciena Bay, Marriot Hotel Sharm Elshiek, Savoy Hotel Sharm elshiek, Hilton watrer falls sharm elshiek.
Duties & Responsiblities
•performed highly specialized design of Medium & Low Voltage, lighting system, earting system, low current system.
•provided advice regarding code compliance, created and presented economic feasibility studies and quality assurance and control.
•reviewed and approved contract documents and specifications, making modifications and recommending alternatives as needed. exercised cost control, monitored schedules.
Projects:
Yanbu Industrail and Commerical ports, Jubail industrial and commerical ports, Royal Comission Projects.
Ayoun Moussa power plant, Alexandria Health drainage project.
Duties & Responsiblities (General).
• Review the contract documents, electrical drawings, reports, specification submitted to ensure completeness, correctness, comply with the scope of work and requirements .
• Coordinate with Senior QA Engineer to establish the intervention point in the proposed Inspection and Test Plan.
• Responsibilities for all above projects as a Project Engineer for the complete execution of all the electrical works till commissioning and handover to the Clients / Consultants
Machines and Electrical Power Engineering