Amit هوتكار

Responsibilities :-
Customer Complaint Analysis by qualitative & Systematic way.
18 No’s Process Workshops conducted to educate suppliers on process requirements and Control the CTQ parameters with respect to Products
20 Training session conducted for Supplier and in house for Problem Solving
10nos Vendor Performance Evaluation completed.
12nos Vendor Capability Evaluation completed
Resolve of Deviations pertaining to NCR, Corrective action request, Site Deviation request, and field observation reports etc. Skills on Non-Conformity Management, Root Cause analysis and 7 Quality tools
Determined quality analysis parameters for the organization and judged the raw materials supplied by different suppliers against the set parameters
Received and analyzed suppliers' details and tenders for quality and performance standards
Shortlisted suppliers that best meet the quality requirements and product specifications
Ensured suppliers are providing quality goods in necessary quantities as specified in contracts
Implementing & maintaining the QMS like standards ISO 9001:2008, ISO 14001:2004 & OHSAS 18001:2007
Developing, administer and maintaining quality assurance procedures and activities required to ensure the processes and products are in compliance with applicable quality standards and requirements.
Developing Quality standards, methods, work instructions and procedures for the inspection of products, determining location and frequency of inspection steps throughout the process to ensure quality products are delivered to the customer.
Support established production processes, by participating at daily production and weekly quality meetings.
Root cause analysis and implementation of corrective action for process related concerns. Analyze failure, corrective and preventive action to respond to customer complaints.
Providing support to the various divisions for effective and efficient implementation of the Quality Management System.
Develop and provide training to technical staff member and Workers on understanding Quality Management System (QMS) & Integrated management system ( IMS)
Preparing the Work pack & maintained the records.
Responsible for monitoring all vendor agreements and presenting summaries on courses of action to the management.
Assisted in performing a quarterly vendor audit that created reports for management.
Worked closely with departmental managers to develop stronger guidelines for vendor relationships.

Project Desc :- Fabrication and Erection for Flow line From CCED saiwan plant to CCED Farha plant
Responsibilities :-
•Inspection of RTR, GRE and FRP joint and Preparation of underground piping.
•Surveillance and witnessing of Daily Construction Activities as per ITP.
•Review and punch listing of Pressure test package and witnessing the Pressure Test.
•Attending weekly QA/QC Meeting.
•Witnessing and Review of NDE Activities.
•Witnessing PWHT, Hardness Testing, Pneumatic Testing.
•Visual Inspection of piping layout, installation& Welding of Various Diameter pipes
•Monitoring fabrication and erection works of structure and pipe support as per the approved drawings and client specification.
•Punch list preparation as per items ( A, B, C

Client :- K.O.C / Pertofac

Project Desc :- Tank construction & erection at (GC-29) In North Kuwait
Responsibilities :-
•Arrangement of Inspection with TPIA and Approved vendors, raising the Inspection Notification to KOC and keeping the track for the same.
•To witness and review the Vacuum Box Test, hydrostatic test, Leak Test, Pneumatic Test & Gravity Test package for the completed quality related documents and reports in accordance with the approved Inspection & Test Plan, like pre hydro test check list, post hydro test check list, line flushing reports, and summery of Welding including reports for NDE, P&ID’S, pipe arrangement plan, isometric drawings and certificate for the calibration of the relief valves, pressure gauges etc prior to hydro test of the line
•Co-ordinate all activities in material handling, storage, preservation etc., as to ensure adequate protection & proper storage, handling & Preservation of the materials at site .
•Fit up & Weld visual inspection of Storage tank Shell, Bottom plate Annular plate, Roof plate, inlet & outlet tank Pipeline & Structural Works

Verification of isometric drawings with respect to P&ID.
• Reviewing the approved quality plans, manuals and scope of work to perform the required inspection.
•Witnessing the Hydro testing of the pipe lines.
•Prepare hydro test packages, line check and punch listing.
•Control of non conformities issuance of punch list.
•Close log book entry or surveillance violation.
•Coordinating with client/consultants while the inspection is being carried out and offer any clarification is required.
•Witnessing of pneumatic test, hydro-test, and flushing; system lay-up both in and in erection field.
•Preparing and maintaining various QA/QC documents and final test packages.
•Witness of alignment, orientation and dimensions of installed piping.
•Assures that all joints are exposed for examination during pressure test.
Ensuring vents are open when filling and draining lines

Tatweer Petroleum / Electricity & water Authority (EWA)

Project Desc :- Tank construction & erection for 4 Nos. 5MG capacity & 2 Nos. 0.75 MG capacity GS/BS tanks at Hamed Town & Al Areen Bahrain Responsibilities :-
•Co-ordination with client and authorized inspector.
•To assist Third Party Inspectors during inspection activity .
•Stage wise inspection for Tank Peaking & Banding.
•Stage wise inspection for Tank Roundness.
•Stage wise inspection for Tank Shell Nozzle & Roof nozzle Marking
•Fit up & Weld visual inspection of Storage tank Shell, Bottom plate Annular plate, Roof plate, inlet & outlet tank Pipeline & Structural Works.
•Interpretation of Radiographic films.
•Prepare Test Package prior Fill-up test .
•Witnessing HYDROTEST OF Fiberglass Reinforced Plastic
•Raw material inspection of Plate, Pipes, Anchor bolt, Angle, channel
•Conducting & Witnessing NDE examinations (PT, MPT )
•Conducting and witnessing of Pneumatic Test, Vacuum box
•Record site condition like Humidity, Dew point, Dry film Thickness, Wet-film Thickness, Holiday detection, chloride test & other action as detailed in Inspection Test Plan

NQD project : fabrication of structure deck extension, beams, bracings etc also installation of HP separator, Surge Tank, OCI & DCI tank and supporting pipelines (CS, NACE, CU-NI ) FLARE LINES, CRUDE OIL LINE..

Modular rig : Project for Structural modification work at 27 unmanned platforms at Mumbai High North and south field( offshore)for deployment of modular rig.
Onshore Responsibilities:
•Raw material inspection at onshore workshop including welding Electrodes & Fitting B/W & S/W, all types of pipes, plates, bars, Angles & Beams & Channels.
•To assist Third Party Inspectors and ensure proper assistance is provided to do inspection.
•To prepare necessary reports and documents for clearance of material.
•To inspect material as per ONGC specification / Quality Assurance plan (QAP) & Inspection Test Plan (ITP)
•Co-coordinating with subcontractor for carrying out Non destructive
• Examination, Heat Treatment of weld Joints
•Make the fit-up & welds visual report, NDT (R.T, P.T, M.P.I, and U.T) & painting report.
•Welding inspection, painting inspection as per ITP plan & AFC drawing.
•Ensuring that calibrated measuring and testing equipments (vernier caliper
•Ultrasonic thickness gauge, multi meter, Coat measure, mother Ovens are used
Off-shore Responsibilities
•Co-ordination with top management & clients.
•Conducting daily progress meeting clients at offshore.
•Inspection and monitoring for fabrication of cellar deck, main deck extensions, platform topside launcher & receiver installation, equipments & piping spools erection, welding, NDT, PWHT, hardness testing, hydro test, painting works of piping, pipeline, structural brazing, primary & secondary pipe supports of platform topside modification works, stairs, chequered plates & grating installation

India Responsibilities
•Preparing daily inspection report
•Final and pre dispatch inspection of products as per QAP & Customer requirement & Maintain inspection records.
•Inward inspection of piping materials and fittings. Release accepted materials to construction and follow up to return the rejected material to supplier for the replacement.
•Checking the dimension on job and create the dimension report