QA/QC Civil Engineer(Aramco,SABIC,Sadara & Royal Commission Approved)
Masco (Mohammad Ali Al Sweilem)
مجموع سنوات الخبرة :20 years, 2 أشهر
Now a days I am working as a QC Civil Inspector on their on going Project (Install Pipe Line and Leak Detection corrosion System) with Saudi Aramco .
This is a Royal Commission Project .There are total 5 number bridges and 256 Kilometer road . I am working on Structure as a Senior QC Structural Engineer.
GIS (General Inspection Services) Aramco
Locations: GOSPs (NGPD& SGPD) Abqaiq, Shedgum, Aindar, Uthmaiyah
PROJECT: Upgrade Fire Protection System
BI : 10-02133
Contractor : PETROJET
POSITION TITLE: SAPID (Saudi Aramco Inspection Division) QA/QC Civil Engineer
WORKING AS A QC CIVIL SUPERVISOR DHAHRAN WITH DRILLING AND WORKOVER DEPARTMENT SAUDI ARAMCO FOR THE DPC- 915 SMALL HANGAR PROJECT
Project: STC-J-Utilities Park & Pilot Plant Project (SABIC)
Client: SABIC (Saudi Basic Industries Corporation)
Project: UPGRADE DPC-915 SMALL HANGAR (Saudi Aramco)
Project: Replacement of Building for Waterline & Field Crew Shedgum (Saudi Aramco)
Client: Saudi Aramco
Locations: Dhahran, Shedgum
POSITION TITLE: QC Supervisor /Manager
Project: Master Gas System Phase II Package II (Saudi Aramco)
Project: Onshore Maintain Potential Program OMPP -NA2 (Saudi Aramco)
Project: Pipeline Day lighting Phase III Project (BI: 10-000617) (Saudi Aramco)
November 2016 - To Date
POSITION TITLE: QC Inspector (Aramco Approved)
Project: Upgrade Security Facilities Fences, Gates & GateHouses
Client : Saudi Aramco (Saudi Arabian Oil Company)
Work Description:
To check all work as per standard Saudi Aramco
Preparing Submittals & Method Of Statements
To issue NCR
To meet the minimum requirements of standards
Inspection for the Proposed Area
To maintain the Documents & Records
To ensure that all execution and inspection are carried out as per inspection plan / drawings /
Codes and specification.
Coordination of quality audits/reviews.
Provide guidance and support to project teams on criticality assessments and development of
risk
To prepare Weekly & Monthly Reports.
To supervise the Inspectors.
Checks location of reinforcing steel before placement of concrete.
Crush Rated Barrier
Fencing
Security Rooms
Execution & Backfill
Manholes
Retaining Walls
Specific gravity test of Crush and Sand
Proctor Test
To check Quality Of concrete
To look after batching plant
Cylinder Crushing
All lab tests
Execution works
Project: Dakhni Oil and Gas Processing Unit (Sulfur Recovery Unit)
Client : OGDCL (Oil and Gas Development Company Limited)
Work Description:
To check the reinforcement, Formwok etc
Cooling Tower
Cooling Water Pumps
Waste Heat Reclaimer Exchanger
Reactor Farnace (Horizontal Vessel)
HPM Steam Condenser(Air Cooler)
Sulfur Degassing Reactor
Incinerator & Stack
LP Steam Condenser
Sulfur Condenser
Pipe Rack Foundation
Thermal Oxidizer Foundation
Pipe Sleeper Foundation
Valve Support Foundation
Sulfur Storage & Loading Area
Fencing
Palletizing Area
Boilers
Roads
Retaining Walls
Specific gravity test of Crush and Sand
Proctor Test
To check Quality Of concrete
To look after batching plant
Cube Crushing
All lab tests
Execution works
Work on AutoCad Cross Section etc
POSITION TITLE: QA/QC Engineer
Project: Coal Fired Boiler And Steam Turbine Project ICI Soda Ash Khewra
Client: ICI
Work Description:
To check the reinforcement, Formwok etc
Installation of Chimney
Installation of Boilers
Installation of Slag Silo
Boundary Wall
Culverts
Roads
To look after Asphalt plant
All asphalt tests (Extraction Gradation, Marshal, Gmm, Gmb, Core Cutter)
To look after batching plant
Cylinder Crushing
All lab tests
Slip forming Concrete
My responsibilities in my job include;
• Installation of Ductile Iron Pipes
• Excavation for trenching
• Bedding for pipe laying
• Pipe Laying
• Padding
• Backfilling
• Sub-base
• Asphalting
• Making progress reports & schedules on daily, weekly, monthly & monitoring & updating the same.
• Making & submitting the PLANNING SCHEDULE of the project to the consultant.
• Inspecting the cement mortar lining of the damaged ductile iron pipes & fittings.
• Fabrication and Installation of Drain Stations including waterproofing
• Fabrication & Installation of Vent. Stations including waterproofing
• Installation of Elbows and Tees
• Conducting Compaction tests
• Conducting Pipe test / Hydrostatic test
• Monitor the concrete work
• Conducting Inspections and submitting Request for Inspections (RFI’s)
• To monitor safety precautionary works
• Supervision of dewatering, pipe repair and lining works
• To monitor the THRUST BORING work by manually and by machine
• Observations on testing of Butterfly valves, Air valves and Washout valves
this include:
(a) Visual testing
(b) Body testing valves upto 24 bars(150% of working pressure)
(c) DFT Testing (400 microns)
Project: Pakistan Textile City
Client: Dewan Group of Industries
Work Description:
Supervision of concrete works.
To check the reinforcement & formworks.
Discussing the technical issues with consultant and client.
Supervising the site in such a way that it should meet the work schedule.
Investigate the cause of quality in case of any difficulty.
Attending all site meetings as well as following routine meetings:
(a)Progress mettings
(b)Staff meetings
(c)Progress & planning meetings with consultant & client
(d)Safety meetings.
Levelling and Grading works.
Compaction Tests (F.D.T)
Maintain the water cement ratio
Compressive strength test for cubes and cylinders
Layers of Sub-grade, back fill
POSITION TITLE: AutoCAD Technician/Inspector
Worked on following projects:
Project: Rawalpindi Environment Improvement Project (REIP)
Client: PMU-WASA, Rawalpindi
Project includes the design of Water Supply, Sewerage and Storm Water Drainage Systems. Preparation of layout drawings and standard details for construction issue.
Project: 15 Playgronds at AL-Shamkha, Abu Dhabi
Client: Sorouh Real Estate
Design of 15 Playgrounds in a residecial tonship called AL Shamkha in Abu Dhabi.The Scheme includes;Residential units (5000 nos.) and associated facilities.
Project: Private Mini Port & Allied large span structures and Infrastructure for HH Sheikh Tahnoon Bin Zayed, Abu Dhabi
Client: H.H Sheikh Thanoon Bin Zayed Al Nahyan
Design of a mini port and all the related structures and infrastructures
Project: Kachhi Canal Project (KC-05)
Client: Water & Power Development Authority (WAPDA)
Work Description:
Supervision and pouring of concrete for the canal by lining machine at site.
Supervision the asphalt works.
Boring work for the test piles.
Supervision of the Form work for the Box Culvert.
Supervision of the Confirmatory Boring work.
Supervising the mixing, levelling and grading of layers.
Supervision of steel fixing work for the culverts.
Execution of the rock cutting, compaction of embankments.
Execution and Supervision of the Earth work, Alignment, Roadway excavation
(Rock cutting), clearing and grubbing, natural ground compaction and formation of embankment.
Preparation of shop drawings using autocad.
Project: Kachhi Canal Project (KC-04)
Client: Water & Power Development Authority (WAPDA)
Supervising concrete pouring for the canal by lining machine.
Field Density Test (F.D.T) for the compaction tests of canal bed, slopes and roads.
Conducting the Pile Load test for the bridges at site.
Standard Penetration (SPT) by the reverse rotary machine at site.
Cylinder crushing test by compressive machine.
Concrete slump test at batching plant and to look after concrete mixtures, water
ratio and setting time of concrete.
POSITION TITLE: Site Inspector
Project: Karachi Northern Bypass (KNBP), Project Package-II, Karachi
Client: National Highway Authority
Description: Execution and Supervision of Karachi Northern Bypass - 26Km
Highway
POSITION TITLE: Site Inspector
Project: Planning and Execution of Combined Effluent Treatment Plant (CETP)
Client: Pakistan Tanneries Association (PTA), Korangi, Karachi.
Description: Assigned on Planning and Execution of Combined Effluent Treatment Plant.
ALL CONCRETE TESTS
Full command on Auto CAD
Worked on D.A.E Final year Project: “Observations on Soil and Material tests for Motorway Project – N4, Karachi.” Conducting Bituminous testing for Liyari Expressway Project
Civil Engineering , Good Knowledge about Surveying Total Station And Geo Technical Techniques.