MEP Construction & Commissioning Manager
Petrofac International
Total des années d'expérience :22 years, 4 Mois
1. February 2022-Present
Project: Duqm Refinery - Oman for OQ8
2. March 2019-January 2022
Project: Yibal Khuff - Oman for PDO
Present Key Responsibilities
• Construction, Procurement follow up, Commissioning & Maintenance
till final handover of MEP system for the Project, which includes
substations, laboratory, power plants, Main control rooms, Main
Admin Building, Central Controls Building, warehouse, Maintenance
centre etc.
• Looking after the preparation and submission of Project close out,
Testing and commissioning, Owner Training, Punch list process hand
over requirement to the Client.
• Project & System handing over / taking over process and follow up the
O&M Documentation work.
• Successfully managed all the unplanned MEP breakdowns and took
necessary action as and when required.
• Adhering to HSE regulations, assuring that all the work permits are
implemented according to scope of works at site during the
construction tasks. e.g., concealed space, tag in tag out, hot works.
Toolbox talks etc.
• Successfully Maintaining the large, chilled water system, DX system, air side, Plumbing & Fire fighting consisting of fifty-seven buildings.
Project: Aircraft Maintenance Hangars for SAEI. (Saudi Arabia-Jeddah)
Project Description:
Saudi Aerospace Engineering Industries (SAEI)
Aircraft Maintenance Hangars will be one of the largest Maintenance, Repair and Operation facilities in the region. The facility consists of 11 hangars including heavy maintenance and line maintenance hangars, wash and paint hangars, component and support shops, supply chain centre, administrative offices, miscellaneous support buildings, multi-level and surface car park, and aircraft parking apron.
Key Responsibilities
• Reviewed design for constructability and overall work sequencing within the program to minimize mobilization.
• Provides technical guidance to contractors and utilizes his subject matter expertise to ensure that the permanent works are constructed per the contract in accordance with applicable codes, standards, approved drawings and specifications, budget, and schedule.
• Assists Contractor with coordination of the MEP process, including the development of coordinated slab penetration drawings, MEP ceiling and wall coordination.
• Assisted team of engineers in review of design, shop drawings & as built of HVAC, Plumbing, and Firefighting etc. in accordance with design codes, standards (ASHRAE, SMACNA, AMCA, NFPA, IPC, SBC, and IBC, IMC etc.) project specification & contract documents.
• Coordinated Design between designer & consultant for all Mechanical trades.
• Assisted and follow-up with equipment selections, calculations (ESP, Pump Head, Heat load, Duct & pipe sizing etc.).
• Identify scope of design interfaces.
• Identify need for mock-ups.
• Oversee timely, and within budget, delivery of the overall MEP design.
• Review design progress and verify correctness of progress recorded on monthly basis.
• Oversee timely, and within budget, delivery of the overall MEP design.
• Review findings of value engineering workshops regarding MEP items and provide comments and recommendations.
Project: King Abdullah sports city, football stadium for ARAMCO (Saudi Arabia-Jeddah)
Project Description:
King Abdullah Sports City is a new multi-use stadium and sports city located in Jeddah. Construction involves a 60, 000- seat main stadium, a grand plaza & mosque, a 2, 000-seat sports hall and a 1, 000-seat athletic stadium, outdoor pitches & courts, and a car parking.
THERMO Saudi is responsible for the entire MEP works excluding the ELV systems of this fast-track project. Technical highlights of the project include a total cooling load of 3424 refrigerant tons, total electrical load of 14 MW, main stadium pitch lights of 640 No’s with a combined load of 1.12 MW and 5 No’s stand-by power generators with a combined load of 8.8 MW.
Key Responsibilities
• Assists Contractor with coordination of the MEP process, including the development of coordinated slab penetration drawings, MEP ceiling and wall coordination.
• Assisted team in review of design, shop drawings & as built of HVAC, Plumbing, and Firefighting etc. in accordance with design codes, standards (ASHRAE, SMACNA, AMCA, NFPA, IPC, SBC, and IBC, IMC etc.) project specification & contract documents.
• Coordinated Design between designer & consultant for all Mechanical trades.
• Assisted and follow-up with equipment selections, calculations (ESP, Pump Head, Heat load, Duct & pipe sizing etc.).
• Review findings of value engineering workshops regarding MEP items and provide comments and recommendations.
Project: Princess NOURA University. (Saudi Arabia Riyadh)
Project Description:
Construction of the university campus "Princess NOURA University" comprising 11 academic buildings, a library, 100 villas, 5 technical buildings. Etc.
This university will specialize in the field of health (medicine, dentistry, nursing care, etc.), as well as in the field of human sciences, fine arts, foreign languages, management, finance, sciences, and IT, etc.) Princess NOURA University is a new university campus covering an area of one million m2 to accommodate 60, 000 students.
Key Responsibilities
• Execution of all MEP services mainly:
HVAC: Installation of Chilled water pipes, Heat Exchangers, Air handling units, Fresh Air Handling units, closed control units i.e., Computer room AC, Fan coil units, Split type units, exhaust fans and all relevant HVAC equipment’s.
• Plumbing: Installation of drainage, water supply pipes, potable water, grey water, fixtures, Accessories, compressed air systems & Generators.
• Fire Fighting: Installation of Diesel, Electric & Jockey Pumps, NOVEC System, FM 200, Carbon steel pipes, hydrants, Fire hose Reels Etc.).
• Implemented and managed coordination process to resolve all conflicts prior to start of installations.
• Analyse construction capabilities of tenderers.
• Assist contract negotiations.
• Develop preliminary construction program.
• Supported Project manager in the execution of the projects during all phases of the project development, and implementation as requested.
• Witnesses Contractors’ quality control inspections to ensure that the permanent works are constructed according to the contract, applicable codes, standards, approved drawings, and specifications.
• Reviews Contractor-submitted shop and as-built drawings, materials submittals, tie-in procedures, project schedules, and work permits; and assists consultant in obtaining their approval and/or comments.
• Prior to installation Arranges meetings between the Contractor and concerned departments/organizations to resolve interfacing problems during construction i.e., Co- ordination all MEP Services
• Log and post all Mechanical changes and as-built information on field drawings.
• Assisted in the testing and commissioning till final handover.
Project: Studio City Dubai.
Key Responsibilities
• Assisted a team of Engineers to ensure that the project will run smoothly and bringing site related issues to higher management
• HVAC: Installation of Chilled water pipes, Heat Exchangers, Air handling units, Fresh Air Handling units, closed control units i.e., Computer room AC, Fan coil units, Split type units, exhaust fans and all relevant HVAC equipment’s.
• Implemented and managed coordination process to resolve all conflicts prior to start of installations.
• Assisted in the testing and commissioning till final handover.
Project: TAWEELAH (Power plant) New Extension B Abu Dhabi.
Key Responsibilities
• HVAC: Installation of Chilled water pipes, Heat Exchangers, Air handling units, Fresh Air Handling units, closed control units i.e., Computer room AC, Fan coil units, Split type units, exhaust fans and all relevant HVAC equipment’s.
Project: Old Town Commercial Island (Hotels, Apartments, shopping mall)-Dubai
Key Responsibilities
• Assisted a team of Engineers to ensure that the project will run smoothly and bringing site related issues to higher management.
• HVAC: Installation of Chilled water pipes, Heat Exchangers, Air handling units, Fresh Air Handling units, closed control units i.e., Computer room AC, Fan coil units, Split type units, exhaust fans and all relevant HVAC equipment’s.
• Implemented and managed coordination process to resolve all conflicts prior to start of installations.
Project: Bharat Diamond Bourse (HVAC-9075 TR cooling), Bombay Hospital, Hotel Maurya Sheraton (India)
Key Responsibilities
• HVAC Construction.
HVAC: Installation of Chilled water pipes, Heat
Exchangers, Air handling units, Fresh Air
Handling units, closed control units i.e., Computer
room AC, Fan coil units, Split type units, exhaust
fans and all relevant HVAC equipment’s.
Installation of HVAC ducting and chilled water pipes.