مجموع سنوات الخبرة: 16 سنوات, 8 أشهر
يوليو 2013
إلى حتى الآن
Site Engineer Mechanical Junior Consultant
في Khatib & Alami Consolidated Engineering Company
البلد :
المملكة العربية السعودية - الرياض
From July 17, 2013 to September 15, 2016
Employer: Saudi Consolidated Engineering Company (Khatib & Alami)
Position: Mechanical Site Engineer Junior Consultant
Project: King Abdulaziz Project (KAP-1)
Duties & Responsibilities:
Site supervision for execution and implementation for all mechanical works related to the building.
• Heating, Ventilation & Air-Conditioning (HVAC) Systems: AHU, Fan coil units (FCU), and Exhaust Fans.
• Plumbing Systems: Compressed Air, Waste Water treatment, Potable Water (Hot & Cold), and Emergency Fixtures.
• Fire Fighting Systems: Water Based Sprinkler System.
• Ensuring that the work is performed according to shop drawings, specification and building standards.
• Following up material delivery.
• Ensuring that the work is accomplished according to planed schedule.
• Resolving technical problems that arise on site execution and coordination with the contractors and their discipline.
• Inspection and testing all mechanical parts, assemblies and accessories prior to installation for conformance to specifications and quality standards.
• Manage safety aspects when dealing with Mechanical networks installations.
• Monitor Mechanical installations to ensure that only approved materials are being used in the temporary and permanent works.
• Testing and Commissioning.
Employer: Saudi Consolidated Engineering Company (Khatib & Alami)
Position: Mechanical Site Engineer Junior Consultant
Project: King Abdulaziz Project (KAP-1)
Duties & Responsibilities:
Site supervision for execution and implementation for all mechanical works related to the building.
• Heating, Ventilation & Air-Conditioning (HVAC) Systems: AHU, Fan coil units (FCU), and Exhaust Fans.
• Plumbing Systems: Compressed Air, Waste Water treatment, Potable Water (Hot & Cold), and Emergency Fixtures.
• Fire Fighting Systems: Water Based Sprinkler System.
• Ensuring that the work is performed according to shop drawings, specification and building standards.
• Following up material delivery.
• Ensuring that the work is accomplished according to planed schedule.
• Resolving technical problems that arise on site execution and coordination with the contractors and their discipline.
• Inspection and testing all mechanical parts, assemblies and accessories prior to installation for conformance to specifications and quality standards.
• Manage safety aspects when dealing with Mechanical networks installations.
• Monitor Mechanical installations to ensure that only approved materials are being used in the temporary and permanent works.
• Testing and Commissioning.
أبريل 2011
إلى مارس 2013
Mechanical Quantity Surveyor, Cost Control Engineer, SAP-Project System (Material)
في AL Arrab Contracting Company
البلد :
المملكة العربية السعودية - الرياض
From: April 2011 to March 2013
Employer: Al Arrab Contracting Company (ACC)
Position: Mechanical Quantity Surveyor/Cost Control Engineer & SAP-Project System (Materials)
Location: Riyadh Head Office
Duties & Responsibilities:
• Prepares the bill of quantities and costs related to mechanical works.
• Monitors the actual quantity installed / constructed and compares the same to the contract and tender quantities and cost.
• Prepares bar bending schedules.
• Coordinates with planning regarding all related planning quantities.
• Provides quantities for invoicing and contractual claims if required.
• Prepares cost estimates of variation orders related to mechanical works.
• Estimates quantities and cost of works related mechanical works for tender documents.
• Maintain, monitor and control project budgets, through Project Controls system, and issue variance reports on monthly basis
• Perform cost analysis for construction activities.
• Maintain, monitor and update the Change Control Registers.
• Perform trend analysis and advise project management team of any deviations from budgets and recommend corrective actions.
• Creating the Procurement Requisition (PR) from the Electromechanical for requesting the material in the SAP builder.
• Checking the material in the contract or budget if within the budget before creating the procurement requisition (PR) in the SAP builder.
• Controlling the budget as per requested material.
Employer: Al Arrab Contracting Company (ACC)
Position: Mechanical Quantity Surveyor/Cost Control Engineer & SAP-Project System (Materials)
Location: Riyadh Head Office
Duties & Responsibilities:
• Prepares the bill of quantities and costs related to mechanical works.
• Monitors the actual quantity installed / constructed and compares the same to the contract and tender quantities and cost.
• Prepares bar bending schedules.
• Coordinates with planning regarding all related planning quantities.
• Provides quantities for invoicing and contractual claims if required.
• Prepares cost estimates of variation orders related to mechanical works.
• Estimates quantities and cost of works related mechanical works for tender documents.
• Maintain, monitor and control project budgets, through Project Controls system, and issue variance reports on monthly basis
• Perform cost analysis for construction activities.
• Maintain, monitor and update the Change Control Registers.
• Perform trend analysis and advise project management team of any deviations from budgets and recommend corrective actions.
• Creating the Procurement Requisition (PR) from the Electromechanical for requesting the material in the SAP builder.
• Checking the material in the contract or budget if within the budget before creating the procurement requisition (PR) in the SAP builder.
• Controlling the budget as per requested material.
يوليو 2010
إلى أبريل 2011
Site Mechanical Engineer
في Al Arrab Contracting Company (ACC)
البلد :
المملكة العربية السعودية - الأحساء
From: July 2010 to April 2011
Employer: Al Arrab Contracting Company (ACC)
Position: Mechanical Site Engineer
Project: King Faisal University Project Hofuf Al Asha’a Saudi Arabia
Duties & Responsibilities:
• Implementations and monitoring of all mechanical related works at site as per approved drawings and methods and safety rules.
• Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
• Plans the execution of all Mechanical related works and coordinates the works to Electrical and civil groups.
• Ensures that all site works are done according to all applicable quality standards.
• Implementation of all Mechanical installation as per approved drawing for HVAC, Plumbing and Fire Fighting.
• Coordination of all Engineering Discipline according to site condition.
• Ensure that the mechanical installation is follow as per building standard & specification.
• Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required.
Employer: Al Arrab Contracting Company (ACC)
Position: Mechanical Site Engineer
Project: King Faisal University Project Hofuf Al Asha’a Saudi Arabia
Duties & Responsibilities:
• Implementations and monitoring of all mechanical related works at site as per approved drawings and methods and safety rules.
• Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
• Plans the execution of all Mechanical related works and coordinates the works to Electrical and civil groups.
• Ensures that all site works are done according to all applicable quality standards.
• Implementation of all Mechanical installation as per approved drawing for HVAC, Plumbing and Fire Fighting.
• Coordination of all Engineering Discipline according to site condition.
• Ensure that the mechanical installation is follow as per building standard & specification.
• Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required.
أبريل 2007
إلى مايو 2010
Electronic Data Processing (Clerk)
في Royce Motorcycle Trade Corporation
البلد :
الفلبين
Royce Motorcycle Trade Corporation
Cabanatuan City, Philippines
➢Electronic Data Processing System (CLERK)
From April 2007 to May 2010
• Posting daily task report in the system
• Checking the receivable card all the paid and unpaid payment
• Monthly progress report
Cabanatuan City, Philippines
➢Electronic Data Processing System (CLERK)
From April 2007 to May 2010
• Posting daily task report in the system
• Checking the receivable card all the paid and unpaid payment
• Monthly progress report
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني